FS: Garage Sell
 

1. P06 ecu, modified before but i took the s200 out from it. It was throwing code 21, you have to redo the vtec conversion parts and redo the chip on the ecu to make it working. 30 cdn obo

2. Used 1st generation miata front subframe
bought it from junk yard few years ago and paid 250cdn
asking 150cdn obo

3. Used 1st generation miata spark wires, 8mm taylor (for B6, 1.6l)
30cdn obo

4. hondata S200 on P28, no boost option
300cdn obo

5. stock USDM ITR tranny, no grind, around 130k km, stock gear ratio and stock LSD
1200cdn obo

6: 90-97 mazda miata cluster panel
10cdn

7. 2.5" T1R b-pipe and spoon N1 axle back, good condition, no dent
it won't be available until early September
500cdn

8. j's racing intake for DC/EG/EK w/no ABS
it is really beat up due to autox for 3~4 years
100 firm

9. ITR spec AEM cold air intake
siliver color
150cdn

11. some oem brand new miata suspension bushings (almost complete but missing left side front bushings)
60 firm


13. spoon rear tower bar for DC/EG
some scratches on the bar but other than that it is all good and solid
150cdn

14. 92-95 civic HB rear window, good condition w/ good defroster line
130 cdn

for any question, pm plz or post here
thx

all parts are located in Victoria BC

Would trade parts for:
- recaro/sparco/omp/bride bucket seat (black color only)
- for DC2R: apexi WS2, greddy SP2, greddy SE, tanabe medalion touring or spoon street type axle back
- hawk hp+ rear for DC2R
- 25mm spacer for 5x114.3 honda applicationw/ no studs

SOLD list:
15x7 +38 5zigen bronze FN01RC, good condition execpt 1" curb make on 1 wheel, w/ falken 912 205/50/15 (70% tread) w/ Ray nuts
front lip for 92-95 civic hb/coupe
Black JDM ITR Recaro SRD w/ driver side rail
RC370 injectors
Buddyclub specII catback
used T1R rear camber arm
used 290cc prelude OBD2 injector
used itr intake manifold
Used EG stock b-pipe and stock EG muffler
96 GSR rims
d16z6 swap
B18C5 block
used integra type r throttle body
tanabe super down springs
light weight B-series crank pulley
92/95 civic HB and 96-00 civic HB - magnaflow cat-back exhaust
stock ITR 22mm rear swaybar
asr rear subframe brace
Used EG stock oem half size radiator
front benson 3 point tower bar
4x100 13x7.5 +25 lenso rims with 225/50/13 hooiser A6
skunk2 pro front camber arms with energy suspension upper arm bushing

for any question, pm plz or post here
thx

all parts are located in Victoria BC

Bump for my buddy

you've been PM'ed

Motor come with harness? What exactly was done in the rebuild?

motor doesn't come with harness, if u are going to put it into EG cx/dx or EF, u only need to add few wires for vtec, that's all

head and bottom end was rebuilt by my friend when he still owned it
new valve seal, all new gaskets/seals and new piston rings according to my friend
before the clutch/pressure worn out, the engine still pulls strong without burning oil:thumbsup:

do you have the 5 lug conv?

sorry i don't have 5 lug conv. for sell

front brake assemble with "spindle"

ray, i could use the stock prelude injectors for the K24 im building.

But i aint paying 140 for stock injectors, seeing as how i sell my sets for around 75 bux.

let me know if ur willing to budge.

RAY vs Jas :haha::haha::haha::haha:

jas, i have really no clue how much for the stock prelude injectors, i only look up how much for brand new on the net and base on the price to set up the price for it haha
anyway, if u want to take them for 75 buck, sure
they are sitting @ autofx right now

bump......

+1 for buddy club spec II, Very nice unit, both in quality and application.

bump... all this sounds familiar .

almost all the mileage was highway.. i work NEXT to the old ghetto $$$$$$$$ up @ keatings... leading to daily highway commutes..

RZZ - let me know if you need any pictures.

bumppppppp

updated!!!

updated!!!

bump.........

bump....>>>

updated...

updated>>>>

updated>>>>>

bump>>>>>>

updated >>>

bump >>>>>>