Project AWD CRX - Turbo DOHC ZC well, the old light bulb went on when a guy on Honda-Tech built the first AWD ef chassis hatchback using the Realtime AWD drivetrain from the 88-91 Civic Station Wagons. The guys that built that car used a sohc vtec motor with a pretty radical turbo kit pumping out 430whp on the stock block. For our motor, we are gonna be using a DOHC 1.6L JDM ZC block built with low compression D16A6 pistons and rods, and a PG7 86-89 USDM Integra cylinder head. The donor car for the drivetrain will be a 88 Honda Civic Station Wagon with the Realtime AWD standard transmission drivetrain. All of this madness will be stuffed into my old crx chassis that was in a major front end wreck a few years back. I ended up selling the car and then buying it back to do something stupid with it. The boys at pretech are going to work their magic and straigten out the front end and give it a quick squirt of paint. Anyway onto the pics. This one is gonna take a while so dont expect too many quick updates. These first few pics are of the donor car and the dismantling/part out of everything we are gonna need for the swap. Thx to cole @ plus one in nanaimo for finding us a buyer for the motor from the donor car to help us with cost of the car. :thumbsup: http://i7.photobucket.com/albums/y26...X/IMG_0243.jpg http://i7.photobucket.com/albums/y26...X/IMG_0244.jpg http://i7.photobucket.com/albums/y26...X/IMG_0245.jpg http://i7.photobucket.com/albums/y26...X/IMG_0246.jpg http://i7.photobucket.com/albums/y26...IMG_0247-1.jpg http://i7.photobucket.com/albums/y26...X/IMG_0248.jpg http://i7.photobucket.com/albums/y26...X/IMG_0252.jpg http://i7.photobucket.com/albums/y26...X/IMG_0254.jpg |
http://i7.photobucket.com/albums/y26...X/IMG_0256.jpg http://i7.photobucket.com/albums/y26...X/IMG_0259.jpg http://i7.photobucket.com/albums/y26...X/IMG_0260.jpg http://i7.photobucket.com/albums/y26...X/IMG_0261.jpg http://i7.photobucket.com/albums/y26...X/IMG_0263.jpg http://i7.photobucket.com/albums/y26...X/IMG_0264.jpg http://i7.photobucket.com/albums/y26...X/IMG_0265.jpg http://i7.photobucket.com/albums/y26...X/IMG_0267.jpg With the motor and drivetrain out the next big task is to pull the entire electrical system including the dash, body and trailing harness and then the biggest thing, cutting out the driveshaft tunnel. I dont think we are gonna need it. Id rather go the route of drilling out the driveshaft hangers from the wagon and welding them into the crx floor and rerouting the exhaust as required, but hey, im not about to argue with the head tech on the matter. We cross that bridge when we get there. |
Looks like alot of good times are goin to be had. |
NIICCEEE! can't wait to see this thing take shape |
LOL this is awsome, can't wait to see the finished product. |
Looks like a lot of fun. Good luck :D |
haha nice keep us updated. |
That's really cool! Can't wait to see the fabrication work! |
I know nothing about that Realtime AWD system. How is it biased? Where do the three or four horses go? |
Fucking EPIC. Can't wait to see the finished product... |
Twice as many axles.... WOO! |
so what type of racing is this for? sounds like a very cool project... |
When slammedcivicsi and I were looking into doing that a few years back, it looked as though the 4 main rear subframe bolts lined up to the existing FWD chassis. If that is infact the case, drop the old rear subframe, throw in the new one, and locate your driveline accordingly. IIRC it would require cutting the floor to allieviate funky driveshaft angles. ...and good luck haha :D |
WAGOVAN? ridiculous. I wouldn't have expexted any less. |
Quote:
|
Quote:
1: cut out the driveshaft tunnel and weld in tunnel from the wago. 2: run it in the exhaust tunnel, weld in the hanger bearing mounts, and run driveshaft accordingly. I wanna do the latter, Das Birt wants to do the first one. we shall see exactly what needs to be done, once we get the crx on the rack and get the powertrain installed. |
cool project! i vote #2, seems like a ton less work. just run the exhaust out the bumper or something. |
are the ef awd trans a 6 speed like the 3g's? |
Quote:
|
i was wondering if you were batshit crazy enough to go through with this plan, guess you proved that theory :P |
car is completely gutted. took the wiring harness, dash, dash harness, steering column, gauge cluster. only thing left now is to cut out the D.S tunnel and cut out the trans mount hanger on the pass side. we'll be taking care of that this weekend. |
I normally have no patience for stupidity, but this I like! :) |
sent the batter shit box off to malahat today. Dropped the new crx shell off at the shop. Soon we start assembling the power train and getting this shit on the move. more pics to come. |
Good luck with it dood... can't wait to see the results! |
All times are GMT -8. The time now is 03:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net