[YVR] FS: FS: Nissan Consult Bluetooth Reader and ECUTalk Blue LCD Consult Display

[ncrx]

ConsultBT Bluetooth Nissan Consult Reader - 100$
and
ECUTalk Bluelcd display of all consult sensors 300$



Allows your laptop or Android device to communicate with your vehicle's ECU to read and clear fault codes, view real-time sensor data, perform active tests, and more.

Can be used with
180SX/Silvia S13 (CA18 not supported)
200SX/Silvia S14 & S15
Skyline R32, R33 & R34
300ZX Z32 ('96 models and late '94-'96 models with 16 bit ECUs may not be supported)
Pulsar N14, N15 and GTiR
likely more models with the late 80's early 90's consult ports

Used with following App
https://play.google.com/store/apps/d...ndsilite&hl=en



Other apps supported
Which software can I use with ConsultBT?
ConsultBT Scan (Android)
NikoZ (Android)
Torque Pro (Android - Beta support only, still in development)
Conzult (Windows)
ECUTalk (Windows)
Nissan Datascan (Windows)
Further testing and development underway!


ECUTalk Bluelcd display of all consult sensors 300$


sensor display image taken from manufacturer



Features
1. Sensor display showing
speed,
rpm,
battery voltage,
fuel economy,
injector duty cycle (both banks if available),
ignition timing,
AAC,
O2 voltage (both banks if available),
water temp,
AFM voltage (both banks if available),
TPS voltage/%.
2. Trip meter displays (current trip and all trips), showing current speed, fuel economy, and trip average speed,
average fuel economy, fuel used, fuel usage rate, distance travelled, and time elapsed.
3. Fault code reading (with fault name and number of engine starts since fault occurred) and fault code clearing.
4. Integrated USB consult interface passthru (the same as using a normal USB consult interface).
5. Maximum/peak sensor values recorded for the current trip
6. Time trials (0-60, 0-100, 0-160, 400m)
7. Options (KPH/MPH, C/F, and TPS V/% settings, injector/cylinder setup for economy readings for petrol vehicles)
8. User-Definable Alerts, for Temperature, Injectors, Speed, Air Flow, RPM and Voltage – buzzes/flashes when hit

Hardware
Dimensions: The unit is 144mm wide, 48mm high, and 26mm deep, cable length ~150cm, and weighs ~230g

Works On:
Some common vehicles that are supported include (but is not limited to):
 R32 Skyline (9/89+ only, check for plug) / R33 Skyline / R34 Skyline
 C34 Stagea
 S13/S14/S15 Silvia / 180SX / 200SX / 240SX (SR20/KA24DE engines only, not CA18)
 Z32 300ZX
 N14/N15 Pulsar (including GTiR) / N15 Almera
 B13 NX Couple / NX-R Coupe / NX100 / NX1600 / NX2000
 B13/B14 Sentra / Sunny
 P10/P11 Infiniti G20 / Primera (not P11-144, this is OBDII which is not consult compatible)
 K11 Micra
 U13 Bluebird
 GQ Patrol (TB42E – i.e. electronic injected, not carburettor)
 GU Patrol (TB45E, RD28ETi, TD42Ti only, check for port, some are OBDII – see below)
 R50 Pathfinder (VG33E, check port, some are OBDII – see below)
 G50 Infiniti Q45
 Y32 Cedric/Cima (VG20/VG30 engines, not RD28)