NEED ASAP: anyone with a pooched HONDA/ACURA Distrubutor?
 

i need one tiny little screw from a honda/acura distributor (integra/civic etc)

it's one of the two (they are the same) little screws that hold the wires on to the ingition coil

both honda and acura dealerships are unable to find this little screw so i'm screwed


if you could please help that would be great

thanks

What are the measurements of the bolt?

http://www.acuraoemparts.com/delray/...All&vinsrch=no

it's number 014 93892-04006-08 SCREW-WASHER (4X6)


thanks

i assume 4x6 means M4x 6mm long, since it is a japanese car. If that is correct, you should be able to go to NAPA or lordco and get a bulk bolt of that size.

Hope this helps!

ya i was going to try lordco or something like that next...the screw also has washers on it so i don't know if lordco would have those as well

when i talked to the parts guy at the honda dealership he said i should stop in and see if one of the techs has an extra dist lying around they he might use for parts, then ask them if i could grab the bolt

i'll try that first then if that fails i'll go to lordco or something

thanks

Rona on Grandview Hwy has a wicked supply of Metric Bolts too.
Ive been to Rona tons of times to pickup misc bolts and nuts