REVscene Automotive Forum - Post up your Evo thread!

REVscene Automotive Forum (https://www.revscene.net/forums/)

- Mitsubishi Tech Resources (https://www.revscene.net/forums/mitsubishi-tech-resources_314/)

- - Post up your Evo thread! (https://www.revscene.net/forums/562122-post-up-your-evo-thread.html)

the guys i usually roll with include 1 other evo and a bunch of subarus

Quote:

Originally Posted by TheMatty (Post 6477466)

the guys i usually roll with include 1 other evo and a bunch of subarus

i picked up my evo 8 last tuesday, maybe i can roll with you guys :thumbsup:

just want to post my one month old evo!!!

http://im1.shutterfly.com/media/47b9...D550/ry%3D400/

^^^

man, those are some sexy evo 9 down in the US of A

My Evo, for sale in Vancouver btw.

damn can\'t wait till I can add my evo to this thread...still looking for my WW Evo 9

EVos are so evilll ahhhhhhhhh

Love Evo, EVO > sti anyday
:thumbsup:

here is mine so far...

http://im1.shutterfly.com/media/47a0...D720/ry%3D480/

http://im1.shutterfly.com/media/47a0...D720/ry%3D480/

please excuse the wheel gap. i know i need to work on it. :)

Interested in meeting other early evos in Vancouver. Also, I'm new to this...is there an Evo specific meet up?

Quote:

Originally Posted by Johnierotten (Post 8522968)

Attachment 22214

Attachment 22215

My Evo 3

LOVEEEEE Evo III...So clean!! :eekthumb:

http://i.imgur.com/rAPIRRR.jpg
http://i.imgur.com/lSqVy45.jpg
http://i.imgur.com/rDcK7A4.jpg

Graphit Grey 2006 Mitsubishi Lancer Evolution IX SE
55,000 miles

Engine
BBK full turbo
HKS 272/278 mivec cams
Perrin Intake
Perrin 3port EBCS
Mishimoto Radiator
Omni 3bar MAP sensor
FIC 1100cc high-Z Injectors
Fuel Lab Mini FPR + Pressure Gauge
Radium Fuel Rail + Pressure Gauge
Walbro 255 lph fuel pump
Titek magnetic drain plug
Mil-Spec throttle body seals
Sparktech COP PRO (non-cdi)
ETS stainless steel upper Radiator Hose
ETS 4" Intercooler
ETS 2.5" Titanium short route piping
ETS Mini Battery Tray
Tial QR Blowoff Valve
Torque Solutions 3 piece mount kit (front, side and 5 speed transmission)
Torque Solutions Exhaust Hangers
Toxicfab v3 stock replacement manifold (Ceramic Coated)
Toxicfab Stainless Steel bolt kit
Toxicfab cam sensor heat shield
MAP O2 eliminator (recirculated, vband, 3D contoured flange option)
STM resonated test pipe
Tomei Expreme Ti cat-back exhaust
DEI titanium Exhaust Wrap (o2 and downpipe)
DEI Reflect-A-Gold tape
Aquamist HFS-4 water/methanol kit (Not installed...may just go full E85)

Interior
Tactrix Openport 2.0 cable w/ reflash connector
ARC titanium Shift knob
Custom HVAC relocation kit
OEM Heater Label Set
JDM double din bezel
Phoenix Gold Amp
Phoenix Gold 12" subwoofer
Pioneer Avic Z150bh DVD/Navi/Bluetooth/Pod/iPhone

Exterior
OEM Evo IX Rear Bumper
Replica JDM Evo VII Tail lights
Wrap Workz Vinyl on roof
Perrin Shorty Antenna

Drivetrain
Exedy Hyper Twin HD
ACT monoloc
OEM throw out bearing
STM Clutch Fork Stopper
Technafit SS lower clutch cable
AMS upper clutch cable
10mm Bolt Upgrade on Transfer Case

Suspension
Bilstein MR Struts
Swift SpecR Springs
Whiteline Roll Centre Adjustment kit
Perrin PSRS
Perrin Rear sway bar

Wheels/Tires
Enkei NT03+M Limited Edition from Touge Factory 18x9.5 +27
Michelin Pilot Super Sport 245/35/18
Muteki SR48 open ended nuts
Ichiba 10mm hubcentric spacer w/ extended studs (front)
Touge Factory hubcentric rings 67.1mmx73mm (front)

Brakes
Girodisc rotors
Girodisc SS brake lines (front+rear)
EBC Red Stuff Pads
Motul RBF600 Fluid

Maintenance/Fluids
Amsoil Z-rod 10w30 every 2000-3000 miles
Amsoil Oil filter
OEM DiaQueen LSD Gear Oil for Transfer Case and Rear Diff
OEM Diamond ATF SPIII for the ACD
Amsoil Synthetic Manual Transmission & Transaxle Gear Lube SAE 75W-90 API GL-4 for the Gearbox
Uni Foam Filter Cleaner+Oil for Perrin Intake Filter

R. Mutt - I love your build man. And the custom license plate is like an icing on a cake. very nice looking evo.

Thank you Josel. I think there are some other local evos that look much better...Kelvin of static captains and Brendan of Project Detail in particular. Eventually I'll get to that but I just keep it simple for now and focus on the performance.

What plans do you have for your car? Have you taken it out to any events? (strip, autoX, HPDE)

Quote:

Originally Posted by R. Mutt (Post 8529870)

i know both of those guys. they expressed interest on my old 8 when i was selling it few years ago. now they have such nice evos. too. in my opinion, graphite grey is the best looking color. and my taste always preferred a look closer to stock than a highly modified exterior. not a fan of huge wangs haha

my 4 is doing good. i went to import face off in Seattle this year. i ran a 1/4 for the first time in that car. it did 13.5 which is not bad for a stock car. it could have been faster with a better launch and shifting. after that trip though my clutch started slipping. i will be throwing in a competition clutch and flywheel this coming weekend. it should handle more trips to the dragstrip and maybe autox next year.

i have plans on this car but i wont start collecting parts by end of the year. im waiting for a thanks giving sale hahaha

how about you? have you gone to any events yet?

Not a fan of huge wings either but those cars see the track so I get it.

Nice man. 13.5 is a good time for a stock evo given our gas and the age of the motor. Last year I did 12.7@108mph with 1.8 60ft when the car was pretty stock (cams, BBK and tune) and recently did 12.01@115mph 1.9 60ft....need to work on my launch as I'm losing too much traction and then I can hopefully break into high elevens. Car with me and half tank is 3420lbs.

I've done autoX a bunch times but never hit a proper track. Last UBCSCC event I was in STX but they moved me to STU and I won my class despite not having coilovers or any camber in the front. Really want to get Ohlins road & track but they are expensive. I will stay on bilstein mr struts until I can afford them.

I have my stock 9 metal diverter valve if you're interested. It will hold boost much better than the plastic one on the IV if you're still running it. Pm if your interested and we can work something cheap out.

thanks. if mission is still open and my new clutch is broken in, i will go for another run sometime in October. i promised my girl i would take her there before end of the year. i hope to get used to launching the car. last time i slipped the clutch a little too much. then its time to collect parts and hopefully a tune before spring. im still stuck with the 4 ecu so i cant really do anything :cry:

evos are great for autox. even on stock form. congrats on winning your class

i actually have a aps diverter valve sitting in the glove box. thanks for the offer though. i will pm you since i lost your number.

Hey I was just scrolling through the threads and saw this post. R. Mutt I think I met you at autox when you approached my evo 6. I took your advice and ordered up a tactrix cable and all the parts to tune my car hope it works out well! Again It was nice meeting you!

Hey! It was nice meeting you too. Glad you are moving forward with the cable as it's one of the best investments you can make in diagnosing and tuning your car. PM me if you need any help with the software when you get started.

Quote:

Originally Posted by R. Mutt (Post 8533232)

Thanks! It'll probably take me a while to get everything setup but if I run into any problems ill definitely hit you up with a pm!

Posted this up in another thread, but wth!
My Evo just picked it up from Annacis Island on Friday, so much fun to drive. <3 Evo!

I just picked this up recently. EVO 8 RS.

First turbo car, no idea wth i'm dealing with when it comes to mods.

http://img.photobucket.com/albums/v1...ps87d5cbe5.jpg

i'm sure you guys get this all the time, but if anyone wants to sell a white/black/grey evo 8/9.. pm me!