REVscene Automotive Forum
Page 6 of 9 12345 6 789
Show 25 post(s) from this thread on one page

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Nissan / Infiniti Tech Resources (https://www.revscene.net/forums/nissan-infiniti-tech-resources_312/)
-   -   What kind of Nissan do you drive? (https://www.revscene.net/forums/573075-what-kind-nissan-do-you-drive.html)

Peturbo 05-23-2011 12:49 PM
Nissan S14 Zenki Silvia K's

jaemc 08-04-2011 03:52 PM
1990 Nissan 240SX

nabs 08-16-2011 07:40 PM
2004 nissan frontier xe king cab

ptrinh 08-26-2011 06:09 PM
1990 240sx

SE-R06 01-08-2012 10:15 AM
2006 Altima SER

tegra7 01-21-2012 02:32 PM
2002 Altima 2.5s Worst car I've ever owned. I'll never ever buy an effing Nissan again.

way_boy 02-08-2012 04:30 PM
g35x

Nismo 1234 02-08-2012 07:38 PM
370z

JCheong87 02-09-2012 11:14 PM
1995 200SX SE-R... and needs maintenance done, any shop recommendations?

ThatKoukiKid 02-10-2012 08:16 AM
91 180sx (USDM hybrid) ka24de :okay:

SumAznGuy 02-10-2012 10:17 AM
Quote:
Originally Posted by JCheong87 (Post 7792149)
1995 200SX SE-R... and needs maintenance done, any shop recommendations?
Do it yourself? What needs to be done?

The SR20 motor is chain driven so no need to change timing belts. Plugs, cap and rotor is very simple to change.

Oil changes are a breeze. The hardest part would be doing your own clutch changes which is pretty easy with 2 jack stands and 2 hydraulic floor jacks and a buddy.

koukimonst3r 02-10-2012 10:20 AM
1989 240sx still got KA24E lol
Posted via RS Mobile

marksport 02-10-2012 03:47 PM
1995 240SX

JCheong87 02-10-2012 07:51 PM
Quote:
Originally Posted by SumAznGuy (Post 7792451)
Do it yourself? What needs to be done?

The SR20 motor is chain driven so no need to change timing belts. Plugs, cap and rotor is very simple to change.

Oil changes are a breeze. The hardest part would be doing your own clutch changes which is pretty easy with 2 jack stands and 2 hydraulic floor jacks and a buddy.

Right now my list stands at; 1) starter motor 2) new radiator 3) clutch 4) replace blown KYB AGX's (not sure with what yet) on my ground control suspension setup. I'm not sure if I can tackle that all myself, I've recently done the water pump but it took me all day.

SumAznGuy 02-10-2012 09:18 PM
Quote:
Originally Posted by JCheong87 (Post 7793015)
Right now my list stands at; 1) starter motor 2) new radiator 3) clutch 4) replace blown KYB AGX's (not sure with what yet) on my ground control suspension setup. I'm not sure if I can tackle that all myself, I've recently done the water pump but it took me all day.
Starter motor is a little difficult because you have to get at it from under the car, but not something that is impossible for one person to tackle.

Radiator, very easy. Just follow the steps found online to properly bleed the air out of it.

Clutch isn't too bad. I did 2 clutch jobs by myself, but never again. Definately get a friend to help out.

Replacing the KYB shocks shouldn't be too hard. Not sure how easy the CG collar comes off. I had taiwanese knock offs on my car and there is no way to get the collars off as I had to slide the collars onto some rubber spacers.

marksport 02-10-2012 09:41 PM
Change the starter when you do the clutch. Had a friend that parked his car at the top of the hill or a bit of an incline as his battery no longer held charge. For about a year he would bump start his car.

S13SRiding 02-13-2012 08:37 PM
'91 180sx.. needs a bit of love, but i got a lot of love for it!!

tofu1413 02-14-2012 09:27 AM
240z

Mashimaro 02-14-2012 11:44 AM
1984 300zx 50th Anniversary Edition. Been in the family since 1983.

TjAlmeida 02-14-2012 03:22 PM
No one posts pictures...
Posted via RS Mobile

kleensleper 02-14-2012 03:32 PM
Quote:
Originally Posted by JCheong87 (Post 7792149)
1995 200SX SE-R... and needs maintenance done, any shop recommendations?
If it's 5 spd then that's pretty rare around here.

kevin7352 02-14-2012 06:16 PM
3 Attachment(s)
1995 200SX SE 5spd
Attachment 10152
Attachment 10154
Attachment 10153

Klobbersaurus 02-14-2012 07:19 PM
Quote:
Originally Posted by JCheong87 (Post 7792149)
1995 200SX SE-R... and needs maintenance done, any shop recommendations?
interested in coilovers?
oh didnt see your reply after, i got rear coilovers and koni yellow inserts for the front if your interested for cheap

Mashimaro 02-14-2012 07:23 PM
Quote:
Originally Posted by Tj.GSR (Post 7796816)
No one posts pictures...
ask and you shall receive :)

taken at last years Classic Japanese Car meet
http://img.photobucket.com/albums/v4...IMG_3214-1.jpg

http://img.photobucket.com/albums/v4...IMG_3215-1.jpg

JCheong87 05-10-2012 11:57 PM
Quote:
Originally Posted by Tj.GSR (Post 7796816)
No one posts pictures...
Posted via RS Mobile
http://i48.tinypic.com/xefshx.jpg

http://i48.tinypic.com/14l7ds9.jpg

:)


All times are GMT -8. The time now is 10:07 AM.
Page 6 of 9 12345 6 789
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net