REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Auto Chat (https://www.revscene.net/forums/vancouver-auto-chat_173/)
-   -   OBD-II reader? Need help... (https://www.revscene.net/forums/573229-obd-ii-reader-need-help.html)

Ornithology 04-23-2009 12:23 AM
OBD-II reader? Need help...
 
Does anyone know if Canadian Tire or Lordco/Napa do OBD-II reads for free? If not how much would it cost? Need one done asap as I'm selling my car but the CEL came on...man...worst time to happen. I keep it in tip top shape and wat the hell...

anti-vip 04-23-2009 06:43 AM
just go to a shop.....cel came on for a reason so there is a problem with your car...

Iceman-19 04-23-2009 07:12 AM
What kind of car?

Ornithology 04-23-2009 12:30 PM
Ford Explorer

Iceman-19 04-23-2009 02:08 PM
Year....? Engine?

Ornithology 04-23-2009 02:12 PM
hgl

Iceman-19 04-23-2009 02:21 PM
K&N or the like air filter? Chances are you sucked some of the oil onto the MAF contacts. You need to clean them with a can of MAF cleaner, you can get it from cambodian tire. I will take a look and see if there is a jumper for pulling the codes manually.

Iceman-19 04-23-2009 02:47 PM
I cant find a way to check codes without a scanner, sorry!

Volvo-brickster 04-23-2009 10:04 PM
Quote:
Originally Posted by Ornithology (Post 6394429)
2003, 2-dr Sport, V6 4.0L

Problem is once I reset the code, it will drive normally untill I rev it hard over 6.5k (i never drive it past 6.5k ever but just for tesing purposes this is what I noticed). I did just change the airbox out with an aftermarket oil filter. I'm guessing maybe a dirty MAF? But friggin don't wanna mess things up until I get the code...
ford made a 4 liter v6 with a red line over 6000 RPM ?

wow

Ornithology 04-23-2009 10:07 PM
Quote:
Originally Posted by Volvo-brickster (Post 6395193)
ford made a 4 liter v6 with a red line over 6000 RPM ?

wow
Thanks?

Shun Izaki 04-24-2009 10:12 AM
i know most imports have a way to read it through flashing signals... not sure if ford has it. Check the service manual.


All times are GMT -8. The time now is 09:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net