cable clutch problem I recently bought a 90 civic si and it just had the clutch and clutch cable replaced before I got it (fenco clutch and beck arnley cable). now the clutch pedal is stiff as hell, way stiffer than my aftermarket clutch in my other civic. grabs really hard too I find. tried squirting some wd40 in the line and played around with the adjustment, but doesn't make a difference. any other suggestions? |
-release bearing might be tight on the input shaft -could just be tight springs on the pressure plate Did they just replace the clutch disc or the pressure plate and release bearing too? Take a look at the clutch pedal bracket also. I've seen them crack and break from stiff clutch pedals. |
not sure if the pressure plate and release bearing was done, will find out soon. yea, I've been warned about the clutch pedal. thanks for the tips! |
All times are GMT -8. The time now is 10:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net