REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Auto Chat (https://www.revscene.net/forums/vancouver-auto-chat_173/)
-   -   DIY Home depot lips (https://www.revscene.net/forums/610847-diy-home-depot-lips.html)

Levitron 04-04-2010 12:12 AM

Make sure you really clean off the areas which the adhesive will be attaching to the bumper.

I used Windex then alcohol wipes on the bumper so that the 3M tape sticks better. Also make sure you are using the outdoor mounting tape. That stuff is much better. Don't go anything other than 3M.

BEEB 04-04-2010 02:29 PM

Quote:

Originally Posted by Adon (Post 6893164)

I thought u would at least paint it in your garage !

G-spec 04-04-2010 04:35 PM

Quote:

Originally Posted by BEEB (Post 6894116)
I thought u would at least paint it in your garage !

ay ay now, no need to exclamation mark me :p there's a good explanation for that.... I was over at my friends house installing his lip as well and his garage wasn't available

http://i56.photobucket.com/albums/g1...0/P1010298.jpg
http://i56.photobucket.com/albums/g1...0/P1010299.jpg


that was the only time I painted it while on the car, it's not a good idea as spray paint gets literally everywhere.... it didnt really matter to me I was getting a new paintjob at that time anyway.....
I have my shop do it prior to installing on the car, that way they can add flex additive which spray cans don't have, that's the best way to do it.

jpark 04-04-2010 05:46 PM

i tried... lining them was alot harder than i thought....like someone said above, it looks good from far away but close not so much, but i will be re-doing it again since i kinda get the hang of it

http://i861.photobucket.com/albums/a...8/IMGP1304.jpg
http://i861.photobucket.com/albums/a...8/IMGP1306.jpg
http://i861.photobucket.com/albums/a...8/IMGP1303.jpg

underscore 04-04-2010 06:44 PM

adon is that a...lip-lip???

on older cars I can see this but I can't understand such a ghetto mod on a really nice car.

G-spec 04-04-2010 06:57 PM

Quote:

Originally Posted by underscore (Post 6894405)
adon is that a...lip-lip???

on older cars I can see this but I can't understand such a ghetto mod on a really nice car.


yea dude, my bumper is fiberglass and only a few inches off the ground, so I need protection.. and yea it may seem ghetto at first but there is undeniable genius in it you gotta admit... :thumbsup:
because there is nothing on the market quite like this, all the lips you can buy are fiberglass or carbon fiber... the closest thing would be polyurethane which can take a pounding as well, but these are all bigger style lips that fully attach themselves onto the lower portion of your bumper... the HD lip is something nice and subtle that still serves it's purpose really well, protects your kit and pretty easy on the eyes as well.

but yea my car at the end of the day is just a nissan, I drove that thing from Van to fckin Toronto bro, 4200km through rough terrain :haha:

StealthFighter 04-04-2010 08:31 PM

i'll be definitely adding this when i get my front lip.

spoon.ek9 04-04-2010 09:08 PM

so i went to home depot today and didn't spot any garage door liner that matches what is posted here. can someone take a photo of the packaging so i know what i'm looking for? thanks!

c4@urdoor 04-04-2010 09:30 PM

Quote:

Originally Posted by downhiller88 (Post 6894320)
i tried... lining them was alot harder than i thought....like someone said above, it looks good from far away but close not so much, but i will be re-doing it again since i kinda get the hang of it

http://i861.photobucket.com/albums/a...8/IMGP1304.jpg

Damn thats a sexy sonata. Never thought id say that.

hotong 04-04-2010 11:30 PM

Quote:

Originally Posted by spoon.ek9 (Post 6894689)
so i went to home depot today and didn't spot any garage door liner that matches what is posted here. can someone take a photo of the packaging so i know what i'm looking for? thanks!

I did this yesterday and turned out pretty good.... also its in the weatherstripping section. Here is the exact product i bought yesterday.

http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber

Leopold Stotch 04-05-2010 10:41 PM

Quote:

Originally Posted by spoon.ek9 (Post 6894689)
so i went to home depot today and didn't spot any garage door liner that matches what is posted here. can someone take a photo of the packaging so i know what i'm looking for? thanks!

http://i190.photobucket.com/albums/z...1808172809.jpg

i used the same stuff as Adon.

except i bought way too much. if you still cant find it you can buy my left overs :D

josel_atr 04-06-2010 11:08 AM

here is my find:

http://www.srtforums.com/forums/f75/...ot-lip-379671/

Phil@rise 04-06-2010 05:53 PM

LOL that's so redneck
Whats next garden edging on your wheel wells for DIY wide body.

Wait till it comes off and gets sucked up into your pulleys or cv shafts.

Leopold Stotch 04-06-2010 06:29 PM

Quote:

Originally Posted by Phil@rise (Post 6895790)
LOL that's so redneck
Whats next garden edging on your wheel wells for DIY wide body.

Wait till it comes off and gets sucked up into your pulleys or cv shafts.

i was actually quite worried that it might get stuck in my joints and stuff. but cheap vanity got the best of me

jpark 04-06-2010 08:37 PM

lol i hugged a curb today a bit on a parking stall and the home depot lip protected nicely! i was so proud of my self :D

Phil@rise 04-07-2010 10:43 AM

Quote:

Originally Posted by Leopold Stotch (Post 6895832)
i was actually quite worried that it might get stuck in my joints and stuff. but cheap vanity got the best of me

It always does, damn cheap vanity. Always trumps sound judgment. Like three day old pizza when your high or drunk and its to late for delivery.

J-Chow 04-08-2010 01:03 AM

Had mine on for a good 3-4 years without any problems. :)
Go to Rona and grap yourself one.

http://img.photobucket.com/albums/v55/seney/041-5.jpg

http://img.photobucket.com/albums/v55/seney/062-3.jpg

bob_chan 04-08-2010 01:35 AM

Sick car J-Chow. So in terms of the front lip, was it hard to curve the plastic around the 2 points that jut out? I want to do this for my car as I've already touched the bottom on a curb...:(

Leopold Stotch 04-08-2010 01:37 AM

Quote:

Originally Posted by bob_chan (Post 6897758)
Sick car J-Chow. So in terms of the front lip, was it hard to curve the plastic around the 2 points that jut out? I want to do this for my car as I've already touched the bottom on a curb...:(

not at all
the lip is made of foam, and it's very pliable so it can bend in

Spectre_Cdn 04-08-2010 10:05 AM

Quote:

Originally Posted by hotong (Post 6894960)
I did this yesterday and turned out pretty good.... also its in the weatherstripping section. Here is the exact product i bought yesterday.

http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber

:haha:
Quote:

Home Depot Front Lip, April 5, 2010
By 8thcivicRevScene (read all my reviews) (read all my reviews)

"Great, cheap and easy DIY front lip for your car to make it look sporty! Would recommend to everyone who wants a cheap temporary front lip! Be sure to pick up some 3M double sided tape too!!!!!"

spoon.ek9 04-08-2010 12:18 PM

^ haha yeah i read that too

pherio 04-08-2010 01:00 PM

^^ Reading that comment on Home Depot, A bunch of you guy are going to the Home Depot on Terminal, I went during lunch and there's only 2 packs left, one which somebody opened. :haha:

That being said, I'm wondering if this will hold @ hwy speeds or say when @ Mission Raceway for street legals

G-spec 04-08-2010 01:39 PM

Quote:

Originally Posted by pherio (Post 6898257)

That being said, I'm wondering if this will hold @ hwy speeds or say when @ Mission Raceway for street legals


I hit 200kmh+ on some deserted highway in the Saskatchewan, held up just fine

8thcivic 04-08-2010 05:13 PM

LOL i thought they wouldnt allow my review up there cause theyre probably like "wtf is this guy talking about?"

8thcivic 04-08-2010 05:21 PM

Quote:

Originally Posted by pherio (Post 6898257)
^^ Reading that comment on Home Depot, A bunch of you guy are going to the Home Depot on Terminal, I went during lunch and there's only 2 packs left, one which somebody opened. :haha:

That being said, I'm wondering if this will hold @ hwy speeds or say when @ Mission Raceway for street legals

LOL the opened package is still there?!?! it was there 1 and a half month ago and i was like wtf someone opened it and placed it back in there.


All times are GMT -8. The time now is 08:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net