REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Honda / Acura Tech Resources (https://www.revscene.net/forums/honda-acura-tech-resources_310/)
-   -   sputtering and stalling out and erratic tach on my 92 civic b18c swap (https://www.revscene.net/forums/611619-sputtering-stalling-out-erratic-tach-my-92-civic-b18c-swap.html)

lexluthor09 04-12-2010 06:54 PM

sputtering and stalling out and erratic tach on my 92 civic b18c swap
 
These are the symptoms I've been experiencing lately on my Civic (92) with a B18c/GSR Swap obd1.

I figured that the bouncing tach needle was related to the ignitor so I changed that out with a new aftermarket one and as I drove home it was fine, until after 20 minutes of driving.

Then it sputtered hesitated felt like there was no spark, jerked the car around and then it stalled out. I coasted to the side and waited 20 minutes.

Started it again and it was fine for another 10 minutes. Waited again and it started fine.

Anyone have any experience with this? Bad connection on ignitor? I was figuring that mainly due to the bouncy needle, but that wasn't solved obviously.

Anyone have a spare Obd1 Distributor I can try out?

lexluthor09 04-13-2010 06:16 PM

Solved. It was a bad ground on the thermo housing.


All times are GMT -8. The time now is 02:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net