REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Advanced Forced Induction & N/A Engine Tuning (https://www.revscene.net/forums/advanced-forced-induction-n-engine-tuning_305/)
-   -   turbocharger machining and balancing (https://www.revscene.net/forums/616126-turbocharger-machining-balancing.html)

reza 05-30-2010 07:20 PM

turbocharger machining and balancing
 
who does machining of housings and balancing of chra around the lower mainland? i've looked and cant find anyone that does them in house without sending them out to the US

bcrdukes 05-31-2010 05:04 PM

Where have you looked?

reza 05-31-2010 09:57 PM

i found the following,

west coast turbo - wants $400+ for balancing per turbo
dynamic engineering - refused, commercial only
ABB turbo - refused, commercial only
BD diesel - rebuilds only starting at $3-400
ADP distributors - machining starting at $80, rebuilds starting at $500, balancing chra $75
kinetic - rebuilds starting at $350, machining starting at $80

these are quotes for mhi td04 turbos

edit: list updated

edit: list updated again, gonna grab a rebuild kit and do it myself. ill send to ADP for the machining and balancing.

bcrdukes 06-01-2010 12:54 AM

^
Looks like you knocked out every shop I was going to suggest. Sorry! Don't think I can help you there. Good luck!

Phil@rise 06-01-2010 10:27 AM

we keep it local

reza 06-01-2010 05:14 PM

and you charge "$3-400"

chra balance at max costs $100 (and that's still ripping you off)

Phil@rise 06-02-2010 10:33 AM

Quote:

Originally Posted by reza (Post 6974021)
and you charge "$3-400"

chra balance at max costs $100 (and that's still ripping you off)

$100 may seem like a ripoff but that would cover the time needed for setup to test if it is balanced it wouldn't cover any time to take apart the turbo and balance it if its not balanced.

reza 06-13-2010 11:32 AM

still looking, probably going to end up sending it down to washington. anywhere else?

reza 06-22-2010 09:24 PM

where are the big shops around here sending theirs?

godwin 06-23-2010 02:02 PM

contact Clay in this thread http://www.revscene.net/forums/t4-hot-side-t592662.html

reza 06-24-2010 10:28 AM

he is from kinetic right?

edit:found out kinetic sends theirs next door to ADP, contacting them and will update when i get some quotes

edit2:looks like im gonna go with ADP, good prices[other than rebuild]

bcrdukes 06-24-2010 05:59 PM

^
You may know this already (some people don't) but ADP is the parent company of Kinetic Motorsport. ADP does all their turbo work in-house and work on many different makes and models of turbos. :)

reza 05-07-2011 07:49 AM

so just an update,
i did end up going with ADP. i regret it. my turbos never got done, even after 3 months. got the run around every week. took them back and ended up buying from the states.

advice for others: go through a performance shop here like kinetic to send it to ADP cause they obviously dont care about individuals coming directly to them. just my experience.

Super Dipper 05-07-2011 12:04 PM

completely opposite of the experience i have with ADP.

But i generally drop my turbos off, tell them what i need done, they call me and say its ready to roll, i pay the bill and walk out.

no hassles, no issues, the work requested is done, on time and always to my satisfaction.

no issues with ADP here, and i go right up to their front desk, no need to go through a middle-man.

reza 05-07-2011 03:57 PM

thats exactly what i did.

maybe its just my luck this time around, cause ive only herd good things about them hence why i didnt bother shipping to states.
i dont know...at least they didnt charge me anything.


All times are GMT -8. The time now is 03:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net