REVscene Automotive Forum

REVscene Automotive Forum (https://www.revscene.net/forums/)
-   Vancouver Auto Chat (https://www.revscene.net/forums/vancouver-auto-chat_173/)
-   -   Review: A & R Motor Work in Richmond (https://www.revscene.net/forums/618906-review-r-motor-work-richmond.html)

2blunt 07-03-2010 02:22 AM

Review: A & R Motor Work in Richmond
 
I was just wondering if anyone has had any experience with them before?

A & R Motor Work



How is there work etc...

they are relatively cheaper than other shops around Vancouver, and I'm just asking for some opinions about them.

and they don't have a website...

Thanks

chargedpower 07-03-2010 07:26 AM

lets just say they are cheap and their work reflects it. Had my r32 brakes from my gti swapped into a friends car there and they scratched the powdercoating. They also swapped my dp over to another friends gti and they didnt even line the gasket up with all the 3 bolts. Ended up getting another shop to fix it.

you can also ask Darthchilli on here about his experience with them. They installed his lowering springs on his gti upside down.

They are a half ass shop.

Shun Izaki 07-03-2010 08:28 AM

Quote:

Originally Posted by chargedpower (Post 7014541)
lets just say they are cheap and their work reflects it. Had my r32 brakes from my gti swapped into a friends car there and they scratched the powdercoating. They also swapped my dp over to another friends gti and they didnt even line the gasket up with all the 3 bolts. Ended up getting another shop to fix it.

you can also ask Darthchilli on here about his experience with them. They installed his lowering springs on his gti upside down.

They are a half ass shop.

that's what Will get's for cheaping out. should be able to at LEAST DIY springs... then again, who can complain... his DSG broke... silly vw's XD

HondaGuy 07-03-2010 10:37 AM

A&R Motorworks are a reputable shop.
I have dealt with them personally back in 2004-5...and Andrew and Lawrence are licensed meachnics.

Just my experience.

Ichi 07-03-2010 12:06 PM

andrew install lowering springs on my GTI 2 years ago.
i had no problems.

chargedpower 07-03-2010 06:12 PM

they also installed camber plates backwards on bmw m3 and over torqued the endlink. So the endlink snapped off and the wheel had super positive camber. This is a member of Vancouver Euro and had it fixed at another shop afterward.

hamhead 07-04-2010 01:06 AM

Andrew did my clutch and timing belt on my 1980 rabbit 16v. he told me he hasnt worked on one for over 15 years.

he did it no problems. he even drove all the way to the lansdowne mall area to pick up a part for me since i didnt give him all the needed parts. didnt charge me extra

he also trusted me to take my car to work then pay him the next day. plus his price was really good compared to other shops.

overall good experience.

chargedpower 07-04-2010 01:15 AM

Quote:

Originally Posted by hamhead (Post 7015401)
Andrew did my clutch and timing belt on my 1980 rabbit 16v. he told me he hasnt worked on one for over 15 years.

he did it no problems. he even drove all the way to the lansdowne mall area to pick up a part for me since i didnt give him all the needed parts. didnt charge me extra

he also trusted me to take my car to work then pay him the next day. plus his price was really good compared to other shops.

overall good experience.

i am sure can handle a car from the 1980s, its pretty straight forward. But for anything more complex, go somewhere else.

Tim Budong 07-04-2010 01:15 AM

AR put springs upside down..then fixed it
to be honest, they messed up..admitted fault which they should and took care of it asap

DSG s broke..and vw fixed it free..with 10yr warranty..part of recall


All times are GMT -8. The time now is 06:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net