Need help finding assembly and swap shop/help
 

Hey guys, i am building a hybrid honda motor (lsvtec, b18a1 bottom end and b18c1 gsr p72 top end)

here are all the parts I Have


bare engine block (honed, resurfaced, cleaned)
complete cylinder head (resurfaced, cleaned, with valvetrain, cams and cam gears)
intake manifold with throttle body
IM, EM and Head gaskets.
Valve cover
Oil pump
Water pump
timing belt kit (Timing belt, tensioner, spring and bolt)
oil pan, oil catcher and oil pan gasket
crankshaft
LS pr4 rods and pistons
ARP Rod Bolts
ARP Head Studs
ACL Engine bearings and piston rings
LSVTEC Golden Eagles Oil Sandwich
Some hoses and bolts


I am looking for a good place to get all of this assembled and dropped in. I can use my current existing motor to pay for it. I got quoted about 450-500$ for assembly by a machine shop, and another place wants about 750 to swap it in. I need to beat these prices, because I know swapping in a motor isnt hard, its fairly simple with a cherry picker and stand -.-

Also, the motor I have build is a longblock, internally it will be complete, but on the exterior I will be missing a few bolts and hoses probably. Let me know if you guys have any ideas.