![]() |
RB20 Part out Posting this for a friend. Best bet is to call or text 1-250-215-6569 ask for Gavin. All Parts are located in Kelowna and are coming off the car tomorrow. rb20 long block rebuilt 3000k ago. -high compression rb20det -acl race main and rod bearings -oem nissan valve seals -oem nissan headgasket -arp head studs -modified oil pan (more capacity and stronger so it doesnt dent) -oil return from cylinder head to oil pan -new plugs -mishimoto thermostat $500 rb20 trans, has around 110k on it. needs striker arm$150 will part: -gtr valve covers-$200 -555cc tomei injectors with 3000k on them, these are 850 new. $500 -gtr resistor pack$75 -z32 maf with pigtail $150 -nistune ecu with individual user licence soldered into rb20 ecu, with racing greed tune $500 -greddy clear timing cover$80 -hks cam gears$200 -greddy timing belt with 3000k on it $75 -new water pump$75 -yellowjacket coil packs$250 -plazmaman performance intake plenum$750 (+21whp dyno proven) turbo stuff -tubular top mount exhaust manifold, greddy i think? or very good copy $250 -garret t3t04e turbo (rebuilt at the same time as motor with new wheel and turbine) $450 -3"turbo back to dual 2.5" blast pipes $200 -tial 38mm wastegate $175 -screamer pipe goes with wastegate -braided stainless line and silicone return will sell all of the turbo stuff for $1000 -act clutch used for around 10k $250 -b&m short throw shifter modified for rb 20 trans will come with rb20 striker arm $200 -fmic-sold -mishimoto radiator, may not sell if itll work for my new build. will update -mishimoto high pressure rad cap -engine oil cooler with sandwich plate $125 -power steering fluid cooler with lines $100 -stainless braided russel -6 fuel lines and fittings with new filter, compression fittings and aeromotive fpr, fuel rail and return line $300 -dual fans$75 http://i25.photobucket.com/albums/c6...9/a63fa719.jpg ichiba 5 lug hubs, front and rear. new bearings in front. extended ichiba studs in front, arp studs in the rear $375 full gtst brake conversion front and rear. hawk pads all around and new rotors last year with e brake cables and braided lines in front $350 cooling plate for rad $25 200sx rear taillight peice, $50 and your stock one more stuff to come... |
please read the rules.. |
| All times are GMT -8. The time now is 04:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net