FS: Borg Warner S366 ETT

[robx7fcna]

So, I have 2 different 67mm turbos and I decided to keep the other turbo, since the other has a bigger exhaust wheel.

I have never run this turbo, but it is used. It is in very good shape with minimal shaft play on dry bearings

here are the specs that I have for this turbo. It was measured by me andf my caliper had a dead battery, so please excuse me if you find the masurements slightly off, they will only be a mm or so if its the case. If you ae serious, bring by your caliper and measure it to confirm for youself if you like.

compressor
-67mm inducer
-94mm exducer
-4" inlet, 3" oulet

Turbine
-70mm inducer
-80mm exducer
-T4 flanged inlet
-3 1/2 Vband discharge

heres a link and pricing for a brand new unit http://www.timsturbos.com/S366.html


looking for a for a quick sale $750 with a bit of negotiating room If your interested, email me @ Robbieboy193@yahoo.ca for best response

Pics to come soon

[robx7fcna]

I'll also throw in a turbo blanket for free

[robx7fcna]

Pics are up!

[robx7fcna]

bump!