FS: Old School Amps - Phoenix Gold, Soundstream & Alpine
 

I'm selling some really good old school amps. First is an Alpine MRV 100. Here are the specs:

Alpine MRV-100M Monaural Channel Amplifier. 240W x 1 Ch Max (4ohm 14.4V) and 300W x1 Ch Max (2ohm 14.4V). 100W x1 Ch RMS 12V and 150W x1 Ch RMS 14.4V (4 ohm 20Hz-200Hz, 0.08% THD). Pwm Mosfet DC-DC power supply, built int 24db/Oct. low pas filter, subsonic filter, bass control equalizer, speaker level input, gold plated RCA jacks and terminals.

* 24 dB / Octave LP Continuously Variable Crossover (50-200 Hz)
* 1-Band Parametric EQ (30-200 Hz)
* Subsonic Filter (15 Hz)
* Extra Large Gold-Plated Terminals with Wire Insert Capability
* Top Panel Power LED
* 1.3 Ohm Load Stability
* Line or Speaker Level Inputs
* 4V Input Capability

Subwoofer Mono Amp Specifications

* Amplifier Type: Mono
* RMS Power: 150W x 1 @ 4 Ohms
* THD at 4-Ohm RMS Power: 0.08%
* Bridged RMS Power: 200W x 1 @ 2 Ohms
* Speaker Level Inputs: yes
* Preamp Outputs: no
* Built-In Crossovers: LP
* Bass Boost: 0 or 12 dB
* Frequency Response: 10-200 Hz
* Signal to Noise Ratio: 100 dB
* Fuse Rating: n/a

http://img585.imageshack.us/img585/2303/alpineh.jpg

Will sell this for $75.

Next are two Soundstream Class A 5.2 amps. These are cheater amps.
Actual Amp Rating:

2 x ¼W @ 4 ohms (12.6V),
2 x 100W @ 2 ohms (14.4V),
2 x 250W @ 1 to ¼ ohm (14.4V),
1 x ½W @ 8 ohms bridged (12.6V),
1 x 200W @ 4 ohms bridged (14.4V),
1 x 500W @ 2 to ½ ohms bridged (14.4V)

Will post pics later. Will let these go for $175 each. Or $300 for the pair.

Next I have 2 Phoenix Gold MS 2125 amps. For those of you who know their stuff about old school car audio, these are still very sought after amps because of amazing sound quality and made in the USA. These are still going for $400 - $600 used on Ebay.

Specs Are:

Into 4 ohms @ 12.5/14.4 VDC
125/160 WRMS x 2
Into 2 ohms @ 14.4 VDC
255 WRMS x 2
Bridged into 4 ohms @ 14.4 VDC
510 WRMS x 1

Will post pics later.

Will let these go for $400 each or $700 for the pair.

do you have the line level input harness for the alpine unit?

No I don't. I'll have to look into my junk and I might have one. I'll let you know.

gotta have PG pics.........



or not