FS: 16x7 25et 3-piece ARE wheels 4x108/114
 

16x7 25et 3-piece ARE wheels with dual bolt patterns 4-108/114(I think) Made in Japan(very possibly by the same place that makes Works) in the early 90s, sold in the US by American racing. these were brand new old stock when bought them never had a tire mounted on them but had 2decades of storage damaged/wear&tear on them. I had custom machined flat caps made out of solid aluminum blanks with 1/2"dr port to tighten and remove them.
Wheels are currently being refinished to minty fresh condition!

The bad: NOTHING!! THESE WILL BE MINT DELIVERED TO YOUR DOOR!


Asking Price: $1800obo

(I have seen these fetch $2500 with some wider lips.)

PM ME for best results!!
Location: Vancouver Canada

Pics:
http://stageawesome.com/photos/allen-8.jpg
http://stageawesome.com/photos/allen-10.jpg
http://stageawesome.com/photos/allen-12.jpg


break-down and fitment pics:
Clearance to BRAND NEW SVT Focus front brake Pads and rotors: (300mm rotots, fyi)
http://farm6.static.flickr.com/5098/...a556059d_z.jpg
http://farm6.static.flickr.com/5293/...fa337b06_z.jpg
http://farm6.static.flickr.com/5298/...2bd94f13_z.jpg
http://farm6.static.flickr.com/5258/...c72016b3_z.jpg
http://farm6.static.flickr.com/5019/...f083213e_z.jpg
http://farm6.static.flickr.com/5253/...de40cf5b_z.jpg

a shot of the face profile and dish... lips have yet to be polished!
http://farm6.static.flickr.com/5298/...f72866e2_z.jpg
http://farm6.static.flickr.com/5136/...e17805c4_z.jpg

Barrels will come brushed like this:
http://farm6.static.flickr.com/5136/...9e8ed8b1_z.jpg
http://farm6.static.flickr.com/5017/...c5f67b87_z.jpg


Faces are back bolted and the lips are sealed together...
http://farm6.static.flickr.com/5011/...855690ca_z.jpg

faces punched out:
http://farm6.static.flickr.com/5140/...e73832c1_z.jpg
http://farm6.static.flickr.com/5012/...31a1f66e_z.jpg


ZEEEEE BOLTZ!
http://farm6.static.flickr.com/5136/...b4663d75_z.jpg
http://farm6.static.flickr.com/5098/...c67580c3_z.jpg



I should have these back from the refinisher late this week or next week, or so i'm told.

these will be refinished to exactly how they were; machine cut faces, black recesses of the spokes and then cleared with polished lips.

if you are scoffing at the price then these are not for you.
each wheel will have approximately 3-8hours put into refinishing them PROFESSIONALLY; disassembly, cleaning, blasting, stripping, welding, machining, polishing, painting before final assembly, hand torquing of 36 rim screws per wheel and then halves sealed with proper DOW sealant!
3pc wheels are not cheap and these wheels are extremely rare despite being ARE's.

These are the only set on and for a Focus that i have seen and are light weight and extremely rare in general!!

I'm open to payment plan options and trades for serious buyers

Stand out from the crowd!
:fuckyea:

Bump, pick up the centers and lips from refinishing tomorrow!
Posted via RS Mobile

Update, centers and lips are back from refinishing!
Please excuse the thumb prints!

Your choice, Chrome or black bolts!

http://farm3.static.flickr.com/2754/...82b131c5_z.jpg


Black:
http://farm4.static.flickr.com/3373/...0e0c941d_z.jpg

http://farm3.static.flickr.com/2581/...550875b6_z.jpg

http://farm6.static.flickr.com/5026/...fd74e245_z.jpg


Chrome:
http://farm4.static.flickr.com/3302/...398dc6c4_z.jpg
http://farm3.static.flickr.com/2437/...23d07a6d_z.jpg

Painted behind the caps:
http://farm3.static.flickr.com/2372/...a51c7033_z.jpg


not just spray bombed!
http://farm4.static.flickr.com/3653/...12cafba3_z.jpg


centers where shot with black, then the faces were machine cut and everything was cleared for a nice uniform finish! lips are polished to a mirror finish!

these will sit unassembled until they are sold and buyer has a choice of Chrome or black bolts at no extra charge! personally, i think the black bolts look amazing!

$1800!

bump

bump

Bump!
I know the bolt patterns aren't very common anymore but could look hot on an AE86 or other early 4bolt Toyota!
Posted via RS Mobile

I loled.