KA24DE Air filter box question
 

Hi, I have a S14 kouki with stock KA24DE engine.

I recently cleaned my K&N air filter and put it back in, then realized that my stock air box.. the top cover and bottom cover do not completely touch.

I was wondering if this is normal, as the air filter does have some sorta gasket looking thing sticking out, or is the top and bottom cover of the air filter box suppose to touch when clipped on? Thanks.

PIC: http://img.photobucket.com/albums/v6...ol2/airbox.jpg

red line is in between the two sides of covers, black sides surrounding the actual filter can be seen

mine touch, s13 ka24de

Awww shiet perhaps I put it back wrong then @@

Tried fiddling around with it some more, still the same.. perhaps its something to do with the K&N drop in filter I have? Anyone else have any experience with this?

maybe the element isnt pushed all the way in, do you have an old regular filter? try to find one and compare the size of the element, especially the rubber/soft plastic around the actual element itself. maybe the sizing is a bit off. because if it isn't sealing tight from there you could be taking in dirty unfiltered air

i wouldn't worry about it too much,

mine never fit cause my filter surrounding was thick.

Yup I think it's suppose to be like that @@

I took the whole filter out and it doesn't even touch when you put them together xD

there is a gaskget around the filter, it will force a seal, dont worry, you are not getting unregulated air

^
That, and it's not like the hole is big enough to cause a problem if something were to fly towards it.

Thanks for confirmation! It really puts my mind at ease xD