Need help on installing a spoiler that requires rivet for screwing
 

Hi all,

So I got an Evo X spoiler that I need to install...however, one of the mounting holes require you to insert a rivet in the trunk in order for the screw get grip onto the spoiler.

My question is...how do you insert that rivet? I understand that you have to do it with a rivet puller/ gun which I don't mind buying from home depot...but then from the research I have done, it seems like those rivet puller is meant for like those nail looking style rivets instead of like a screw cap kinda thing that the spoiler needs?

Regular rivet that is used for rivet puller/ gun:
http://upload.wikimedia.org/wikipedi...lindnieten.JPG

The rivet for the screw to get grip on (golden piece):
http://img197.imageshack.us/img197/3...stallation.png

Another look from one of the guides:
http://img811.imageshack.us/img811/8158/xfactttttt.png

So it seems like a puller/ gun was used in the first guide...but then it doesnt seem like the golden piece would feed right into the puller/ gun? :fulloffuck:

Am I missing something here?

And yes, I know that there is an alternative solution which is to drill the trunk and bolt it right down...but i would prefer to do it the OEM way if it's doable.

Thanks in advance! :)

We call those popnuts or rivnuts. It is a special tool most likely not available at home depot or rona. You should be able to find one at most any industrial fastener place and even Princess auto sells em. We have em here too but not for loan. If you like mark where you want it come by and if I have the correct insert I will be more then happy to pop it in for you.

ahh!! so thats what it is! now everything is starting to connect! :)

thanks alot for the offer Phil! I will give you a shout once the rivnuts arrive (they are on backorder from Mitsu dealership) :fullofwin:

http://t5ak.roblox.com/546b381109a16d11597b03f5629cb323

hahahaha I'm gonna be a douche sorry :bowrofl: the pun's kinda funny though :troll:

lol np its all good....im just glad that my question was answered and now i am finally going somewhere with this :)

I might have the right size here.

what kind of screw is it for the rivnut? We use them by the thousands at my work so if i have the right one, i can give it to you.

thanks alot for the offer again phil! :thumbsup:

but i think i found a solution to it - i might diy my own rivnut tool :D

Homemade Riv-nut Tool

thank you very much for pointing me to the right direction though! i was super puzzled on what the rivnut is called (well now i know)

mods, my problem is solved now thanks to rs! you guys can close this thread :)

well the rivnut should be taking a 10mm screw...but its ok, i can buy those from rona or something...

it was how-to get the rivnut secured onto my trunk that was causing me headaches...but now i know the mechanics behind it i shall be good!

thanks for the offer!