![]() |
new whine Thanks in advance for advice 98 esort se, rebuilt alt and new battery 2 months ago running 4AWG from alternator (fused) to positive terminal running 4AWG from battery negative to chasis (strut mount) and engine running 5+AWG (scoshe wire size) from positive to splitter running 5+ from splitter to JL 500/1, wired to Exile XI12 DVC (ground is 5+AWG) running 8AWG from splitter to Audison SRx4 (ground for this amp is also 4AWG) Srx4 connected to two JBL GTO 628 coax in front and GTO 528 in rear power wires and signal are run opposite sides of car very minimal headlight dim (hard to notice) when headlights turned on, with volume at 0 on deck, i hear a sine wave from all speakers, not sub. Revving does not change volume or frequency. unplugged one set of rca from amp and it got dramatically quieter, but still there I do not hear it from the subwoofer either how close can grounds be on a car? Why is it doing this :( going on a road trip in 3 days PLEASE HELP!! and how does my set up sound? :) |
so I figured it out, there was a broken wire on the dash kit for the climate control lights, patched that and we are good to go!! :D |
Kudos Glad you were able to figure it out. |
Awesome! For other people experiencing whine issues, try and run a ground wire from the deck's ground to the amplifier's ground. We have reduced whine issues by about 95% by using this procedure in deck + amplifier installs. |
All times are GMT -8. The time now is 04:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net