| Vancouver Auto Chat 2016 VAC Community Head Moderator: Raid3n |
 | | 
05-14-2023, 04:58 PM
|
#9326 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
|
I finally found some ramps that can accommodate this low ass car (59.99 from crappy tire right now) 
unfortunately while the car is elevated, my fat ass was still unable to squeeze underneath to reach the drain plug (which those Japanese put a foot behind the front wheels!! basically where the A pillar starts)
the search continues.
| 
|  | |
05-14-2023, 07:00 PM
|
#9327 | | HELP ME PLS!!!
Join Date: Jul 2006 Location: Vancouver
Posts: 5,687
Thanked 3,486 Times in 1,468 Posts
Failed 46 Times in 26 Posts
| Quote:
Originally Posted by Badhobz  I finally found some ramps that can accommodate this low ass car (59.99 from crappy tire right now)
unfortunately while the car is elevated, my fat ass was still unable to squeeze underneath to reach the drain plug (which those Japanese put a foot behind the front wheels!! basically where the A pillar starts)
the search continues. | Why don't you use an extractor?
__________________ Quote:
Originally Posted by PeanutButter Damn, not only is yours veiny AF, yours is thick AF too. Yours is twice as thick as mine.. That looks like a 2" or maybe even 3"? | | |
| | |
05-14-2023, 07:10 PM
|
#9328 | | I don't get it
Join Date: Jul 2009 Location: Vancouver, BC
Posts: 415
Thanked 383 Times in 149 Posts
Failed 5 Times in 4 Posts
|
Maybe that ramp is enough for you to fit a low profile jack underneath a front/center jack point, then you can use stands on the side to hold it up?
| |
| | |
05-14-2023, 07:12 PM
|
#9329 | | Head of HR....have a seat on that couch
Join Date: Jan 2003 Location: Coquitlam
Posts: 21,878
Thanked 15,606 Times in 4,325 Posts
Failed 284 Times in 130 Posts
| Quote:
Originally Posted by 77civic1200 3 points of contact and a flat driveway, looks fine | OSHA approved:
BMW guys: are Style 71's really worth this much? I have a set from the car I parted. https://www.usedvictoria.com/classif...-E46-_36150440
__________________ feedback
Originally posted by v.b.
can we stop, my pussy hurts...
Originally posted by asian_XL
fliptuner, I am gonna grab ur dick and pee in your face, then rub shit all over my face...:lol
Originally posted by Fei-Ji
haha i can taste the cum in my mouth
Originally posted by FastAnna
when I was 13 I wanted to be a video hoe so bad RSUV #7 | |
| | |
05-14-2023, 07:43 PM
|
#9330 | | RS Veteran
Join Date: Dec 2001 Location: Your Location
Posts: 32,045
Thanked 13,592 Times in 5,681 Posts
Failed 520 Times in 346 Posts
| Quote:
Originally Posted by roastpuff Why don't you use an extractor? | If I recall from a previous post (likely another thread?) it made a mess.
Or maybe it was user error. or both. lol
__________________ Quote:
Originally Posted by EvoFire Hey dukes are you bringing lube for me? I found a way to confirm 90% of my problem. | Quote:
Originally Posted by red kryptonite Stock and lube meet :heckno: hahaha | Quote:
Originally Posted by roastpuff BRB getting some Sailun Chowhais rn | | |
| | |
05-14-2023, 07:55 PM
|
#9331 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
|
Those tubes on the extractor was a god damn shit show. Flailing around like doc octopus
| |
| | |
05-14-2023, 08:19 PM
|
#9332 | | I subscribe to Revscene
Join Date: Mar 2005 Location: Vancouver
Posts: 1,956
Thanked 5,176 Times in 1,181 Posts
Failed 16 Times in 14 Posts
|
when you get the extractor dialed - it's pretty sweet.
i'm a convert - at least every other change. it is good to get as much as you can out of the sump once in awhile w a plug out change.
__________________ Quote:
Originally Posted by westopher replace that wood for who gets producer the wood. | | |
| | |
05-14-2023, 08:25 PM
|
#9333 | | RS.net, helping ugly ppl have sex since 2001
Join Date: Feb 2002 Location: Vancouver
Posts: 8,386
Thanked 4,014 Times in 1,549 Posts
Failed 35 Times in 27 Posts
|
I think I’d trust that wood more then I would asphalt on a 30 degree day. Saying that, you don’t need Jack stands. You can probably bench press the back of that car lol.
__________________
Crush - 1971 Datsun 240z - Build Thread
The Daily - Rav4 V6 - “Goldilocks”
| |
| | |
05-14-2023, 10:27 PM
|
#9334 | | HELP ME PLS!!!
Join Date: Jul 2006 Location: Vancouver
Posts: 5,687
Thanked 3,486 Times in 1,468 Posts
Failed 46 Times in 26 Posts
|
I mean, gotta handle the tube properly, don't whip it around if you know what I mean. No helicopter allowed.
__________________ Quote:
Originally Posted by PeanutButter Damn, not only is yours veiny AF, yours is thick AF too. Yours is twice as thick as mine.. That looks like a 2" or maybe even 3"? | | |
| | |
05-15-2023, 05:13 AM
|
#9335 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
|
The one I bought the tubes were really rigid (to prevent pinches in the line) so they were hard to manipulate. Once they were done sucking, quite a bit of motor oil remained in the lines and I had to find a place to hang them up all the while dripping god damn motor oil everywhere. I plugged them with some paper towels but even then it’s messy cuz the paper towels get soaked through and I still need a place to “hang” these stupid tubes for an hour or so. Also that connection between the tubes and the machine is flimsy at best so if you didn’t get it just right, you’ll spring a leak and once again shit goes everywhere. 
When you remove the tube from the dipstick hole, it would occasionally pop out some motor oil and that’s also annoying.
Fuck that shit. I hate making a mess. It’s drain plug or nothing for me.
Last edited by Badhobz; 05-15-2023 at 05:20 AM.
| |
| | |
05-15-2023, 10:23 AM
|
#9336 | | Los Bastardo owned my ass at least once
Join Date: Apr 2014 Location: Van
Posts: 6,052
Thanked 2,520 Times in 1,351 Posts
Failed 238 Times in 145 Posts
|
How tall is that ramp hobs? Can't tell if it's cuz your car is huge, I've been wanting to get one to help out with wheel changes, seems easier to get the jack in as the car is pretty much half jacked already.
| |
| | |
05-15-2023, 10:52 AM
|
#9337 | | RS Veteran
Join Date: Dec 2001 Location: Your Location
Posts: 32,045
Thanked 13,592 Times in 5,681 Posts
Failed 520 Times in 346 Posts
|
@Badhobz maybe you should let roastpuff show you how it's done next time at a stock and noob meet haha
__________________ Quote:
Originally Posted by EvoFire Hey dukes are you bringing lube for me? I found a way to confirm 90% of my problem. | Quote:
Originally Posted by red kryptonite Stock and lube meet :heckno: hahaha | Quote:
Originally Posted by roastpuff BRB getting some Sailun Chowhais rn | | |
| | |
05-15-2023, 11:03 AM
|
#9338 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
| Quote:
Originally Posted by JDMDreams How tall is that ramp hobs? Can't tell if it's cuz your car is huge, I've been wanting to get one to help out with wheel changes, seems easier to get the jack in as the car is pretty much half jacked already. | https://www.canadiantire.ca/en/pdp/c...lswYiJN8Qk1HH3
Crappy tire says it only gives a 4.2inch lift. I only got it because it seems safer and easier then traditional jack stands and wheel chock. Need more of a lift…
| |
| | |
05-15-2023, 11:10 AM
|
#9339 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
| Quote:
Originally Posted by Badhobz so im confused as hell. when my ratrolla is cold, i check the dip stick and it shows the oil is about 1/2 inch over the full mark. So i bought an oil extractor and removed 1/2 a litre and it was still showing over the full mark...
Then my neighbor told me to start it for a few second and let the system pressurize. Once i did that, and checked it again (with the oil flowing through the system) it shows 1/2 a litre under the min mark.
i dont get it.
According to the manual im suppose to check it after warming it up a few minutes and then let it drain back down into the sump. I did it, now its showing full after i put the oil i sucked out of it back in minus maybe 0.15L 
this damn oil extractor is bullshit too. little drops of oil all over the place when its suppose to be "cleaner" than using the drain plug. my ass! those little plastic tubs flying around everywhere and no good place to store them. ended up duct taping them to a ladder to let them drain into my plastic oil pan. | Fuck this thing
| |
| | |
05-15-2023, 11:11 AM
|
#9340 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
| Quote:
Originally Posted by Badhobz I havent wrenched on my own cars since 2005/2006. This is the first time in like almost 20 years that i broke out some tools and decided to do my own oil changes.
I bought some kirkland 0w20 and 5w30, some toyota oil filters/crush washers from the dealership and went to town.
I realized that the dealership doesnt give a flying shit about the torque specs on the oil filter. it was on so tight i needed a breaker bar just to take it off. Pretty sure they used an impact drill to put it on or something.
I torqued it to manual specs of 18.5lbs and changed all the o rings. Felt good knowing the job was done right and the oil level was perfect.   https://www.canadiantire.ca/en/pdp/m...w.ds#store=606
These crappy tire ramps are on sale. i picked them up and they are working pretty good. | These are the ramps I have at home right now. They work quite well but too tall for the ratrolla
| |
| | |
05-15-2023, 11:17 AM
|
#9341 | | RS has made me the bitter person i am today!
Join Date: Jan 2012 Location: PENIS
Posts: 4,576
Thanked 4,457 Times in 1,428 Posts
Failed 299 Times in 127 Posts
|
Damm viscous fan won't come off so I took the water pump out with it  :  
__________________ There's a phallic symbol infront of my car Quote: |
MG1: in fact, a new term needs to make its way into the American dictionary. Trump............ he's such a "Trump" = ultimate insult. Like, "yray, you're such a trump."
| bcrdukes yray fucked bcrdukes up the nose
dapperfied yraisis
dapperfied yray so waisis
FastAnna you literally talk out your ass
FastAnna i really cant
FastAnna yray i cant stand you
| |
| | |
05-15-2023, 11:21 AM
|
#9342 | | RS Veteran
Join Date: Dec 2001 Location: Your Location
Posts: 32,045
Thanked 13,592 Times in 5,681 Posts
Failed 520 Times in 346 Posts
|
Maybe it was designed that way? 
__________________ Quote:
Originally Posted by EvoFire Hey dukes are you bringing lube for me? I found a way to confirm 90% of my problem. | Quote:
Originally Posted by red kryptonite Stock and lube meet :heckno: hahaha | Quote:
Originally Posted by roastpuff BRB getting some Sailun Chowhais rn | | |
| | |
05-15-2023, 12:34 PM
|
#9343 | | Rs has made me the man i am today!
Join Date: Oct 2011 Location: Richmond
Posts: 3,175
Thanked 4,273 Times in 1,177 Posts
Failed 390 Times in 133 Posts
| 
New exhaust. See you guys at the next meat.
| |
| | |
05-15-2023, 12:40 PM
|
#9344 | | Performance Moderator
Join Date: Jun 2001 Location: Richmond
Posts: 18,484
Thanked 19,918 Times in 6,779 Posts
Failed 320 Times in 211 Posts
|
Needs more waifu
| 
| | |
05-15-2023, 01:26 PM
|
#9345 | | I subscribe to Revscene
Join Date: Mar 2005 Location: Vancouver
Posts: 1,956
Thanked 5,176 Times in 1,181 Posts
Failed 16 Times in 14 Posts
| Quote:
Originally Posted by yray Damm viscous fan won't come off so I took the water pump out with it : | that's weird. they should come off pretty easily. Even without the cheater tool. lots of youtubes about knocking it off.
__________________ Quote:
Originally Posted by westopher replace that wood for who gets producer the wood. | | |
| | |
05-15-2023, 02:03 PM
|
#9346 | | Willing to sell a family member for a few minutes on RS
Join Date: Apr 2011 Location: North vancouver
Posts: 13,924
Thanked 34,809 Times in 8,352 Posts
Failed 235 Times in 183 Posts
|
Righty loosey.
__________________
98 technoviolet M3/2/5 Quote:
Originally Posted by boostfever Westopher is correct. | Quote:
Originally Posted by fsy82 seems like you got a dick up your ass well..get that checked | Quote:
Originally Posted by punkwax Well.. I’d hate to be the first to say it, but Westopher is correct. | | |
| | |
05-15-2023, 03:21 PM
|
#9347 | | in the butt
Join Date: Aug 2016
Posts: 3,200
Thanked 4,242 Times in 1,508 Posts
Failed 203 Times in 111 Posts
|
Sent the C7 in for a front bumper ppf, 675$. The guys seem to be pretty slow if they got in me in next day / ClearBra Vancouver.
Never owned a car with low enough kms for it to be worth it. Roastpuff convinced me the other day 
__________________ Quote:
Originally Posted by Mr.Money
i hate people who sound like they smoke meth then pretend like they matter.
Originally Posted by ilovebacon
Does anyone have a pair of 25 pounds one-inch hole for sale at a reasonable price?
Originally Posted by BIC_BAWS
God, women in their early 30s are so baadd lmfao
| | |
| | |
05-15-2023, 03:23 PM
|
#9348 | | Performance Moderator
Join Date: Jun 2001 Location: Richmond
Posts: 18,484
Thanked 19,918 Times in 6,779 Posts
Failed 320 Times in 211 Posts
|
Now you're a bro with a bra... Corvette legend
| |
| | |
05-15-2023, 04:31 PM
|
#9349 | | Willing to sell body for a few minutes on RS
Join Date: Oct 2016 Location: Ricemond
Posts: 12,460
Thanked 14,205 Times in 5,271 Posts
Failed 527 Times in 283 Posts
|
Please grow a porn stash.  You need it donk !!!!
| |
| | |
05-15-2023, 07:02 PM
|
#9350 | | OMGWTFBBQ is a common word I say everyday
Join Date: Mar 2006 Location: Vancouver
Posts: 5,384
Thanked 4,062 Times in 1,902 Posts
Failed 70 Times in 44 Posts
| Quote:
Originally Posted by donk. Sent the C7 in for a front bumper ppf, 675$. The guys seem to be pretty slow if they got in me in next day / ClearBra Vancouver.
Never owned a car with low enough kms for it to be worth it. Roastpuff convinced me the other day | Should wrap the whole front end and sideskirts. I would recommend the roof too since I've seen enough roof chips
| |
| | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
All times are GMT -8. The time now is 10:31 PM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
