FS: Microtech LT10s ECU Microtech LT10s Full Standalone ECU. Perfect working order. Comes with harness, dongle, USB adaptor, software CD. Available in Saanich area. $700. |
Still available! |
More info... FUEL DELIVERY 4x Injector Drivers capable of 4amp Peak/Hold True Sequential Operation on Most 4 Cyl & Rotary Applications Can Run Up To 4x high Impedance Injectors Per Driver Tuneable in MAP or TPS Modes Main Matrix Table has 16x16 Load Sites RPM Tuning Range 500rpm to 9000rpm (10000rpm & 12000rpm Software Upgrade Available as an Option) Overall Mixture Trim +/- 99% Coolant Temp Correction Air Temp Correction Accelerator Pump Amount, Sensitivity & Time Compensation Cranking Enrichment Correction After Start Enrichment Correction Cold Start Accelerator Pump Correction Hard Cut RPM Limiter Soft Cut RPM Limiter Over Boost Limiter Auxiliary Input Correction +/- 99% Sequential, Group Fire & Staged injection Modes 2 Step/Launch Control Limiter IGNITION 4x Ignition Drivers Ignition Setup Preconfigured for Engine Type Configurable to suit 1- 8cyl engines using an external igniter Configurable for Twin Distributors & 2 Rotor Engines 16 RPM Based ignition Points 16 Map Based Correction Points 16 Water Temp Based Correction Points 16 Air Temp Based Correction Points Ignition Advance/Retard on Accelerator Pump Ignition Advance/Retard on Aux Input Trigger Ignition Trim Overall +/- 45deg Ignition TDC Reference Adjustment on Some Applications Ignition Timing Split Adjustment on Rotary Engines Accuracy to 1 degree AUXILIARY INPUTS & OUTPUTS 1x Fixed RPM/MAP Based - ve switched AUX output (Shift Light etc) 1x Fixed Temperature Based - ve Switched AUX output (Thermo Fan etc) 1x Fixed - ve Switched PWM output (Idle motor) 1x +POS switched Auxiliary Input (2 step Limiter/Launch Control Etc) |
SOLD |
All times are GMT -8. The time now is 10:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
Revscene.net cannot be held accountable for the actions of its members nor does the opinions of the members represent that of Revscene.net