| FS: MAP ECU V.1
Have a used Map ecu V.1 for sale.. Comes with unit/harness, pc cord. May or may not come with IAT sensor.
The MAP-ECU has two main functions. Firstly it allows you to remove the stock (and sometimes very restrictive) Air Flow Meter (Flap, Hot Wire and the tricky Karmen Vortex frequency types) and convert your existing ECU to MAP load sensing (up to +30 PSI). Secondly, and just as importantly, it allows you to completely re-map fuel delivery with a 486 point table. This allows the stock ECU to handle injector and other upgrades with ease. The MAP-ECU is configured and tuned Real-Time using a custom developed PC application. Substantial power gains have been realised without sacrificing the driveability the stock ECU provides.
Benefits:
-More power due to improved breathing and through tuning of Air/Fuel ratios.
-The ability to cope with performance upgrades such as larger injectors while retaining the stock ECU.
-High-resolution 486 point table allows fine tuning of performance and driveability.
-Real-Time tuning using a PC based Windows™ application supplied with the unit.
-A built-in manifold pressure sensor capable of reading up to +30 PSI.
-Retains the driveability of the stock ECU usually sacrificed with a full after market ECU upgrade.
-Simple piggy-back installation, no major re-wiring
$250
| 
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
