FS: Compustar CS6102-AS LCD screen best alarm starter
 

This is a brand new Compustar CS6102-AS box has not been opened

Way cheaper than what you could buy it at the stores.

240 send a pm

CS6102-AS | Remotes | Compustar.com


CS6102-AS COMPLETE 2-WAY SYSTEM
Start Features


Remote Start:
Get a head start on the weather outside by remote starting your engine! Activate by holding start button for 2.5 seconds.

2 way confirmation:
2-way remotes alert you when your remote commands have been successfully transmitted to your vehicle.

Diesel Engine Starting:
Compustar remote starters are Diesel Engine compatible and will wait to start to allow Glo-plugs to warm up.
Security Features


Lock:
Secure your vehicle by activating your vehicle's installed alarm. Activate by pressing lock button.

Unlock:
Access your vehicle by deactivating your vehicle's installed alarm. Activate by pressing unlock button.

Siren:
Want to hear the beautiful sound of your alarm's siren? Hold lock button for 4-seconds.

Passive:
Automatically arm/lock your vehicle 30-seconds after you unlock it.

Shock Sensor Bypassed:
Deactivate your vehicle's shock sensor alarm trigger. Perfect when riding ferries, planes, spaceships.

Drive Lock:
Locks doors when customer presses brake pedal to change gears or when the system senses the engine being utilized.

Car Call:
Indicates when RPS-2 or RPS-Touch paging sensor is activated.

Trunk:
Pop your trunk by holding the Trunk release button for 2.5 seconds.

Impact:
Indicates that your vehicle is experiencing unwanted impact/distress.
Convenience Features


2nd Car:
Use one remote to secure and start two vehicles. (Requires additional parts/labor)

Valet Mode:
Turns off all alarm and remote start features, also known as service mode.

Clock/Alarm:
Set your Compustar system to activate remote start every 1.5/3 hours for a 24 hour cycle.

Vibration:
Mute your remote's speakers and set your alerts to vibrate.

Run-Time Indicator:
Clock indicates the remaining time that the engine will be on after remote start.

Signal:
Indicates successful connection/signal communication with vehicle.

Aux Mode:
Additional inputs and outputs that can be controlled to trigger a relay.