Autobody, Lighting, & Structural Tech This forum is brought to you by RPM Electronics in Burnaby.
Discussion about modifying your auotomotive lighting, retrofits, auto body, share projects, ideas, etc.
|
 | | 
07-23-2015, 08:58 AM
|
#1 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| Show off your headlight retrofits!!
Hey guys, my name is George. I am the head installer and retrofit specialist at RPM Electronics in Burnaby. I am also active on the HIDPlanet forum (under the same username), a great forum to check out if you are interested in HID kits and retrofits.
I'm trying to bring the retrofitting trend to Vancouver, I've seen a couple retrofits on the road that weren't done by me so I'm curious to see just how many people are rocking modified headlights!
If you don't know what headlight retrofitting is about, this thread should be quite informative!
I'm not talking about those pre-made headlights you buy on eBay or from China, I'm talking about hand-retrofitted goodness!
I'll also be sharing my major retrofits on here! Some of them may even belong to RS members!
Here is my most recent work, a LEDConcepts 'ColorMorph' SMD Halo Ring kit + headlight blackout on a 2014 Dodge RAM 1500:
BEFORE 
AFTER     
Last edited by sevenism; 07-23-2015 at 11:32 AM.
| 
|  | |
07-23-2015, 11:54 AM
|
#2 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| | |
| | |
07-23-2015, 11:59 AM
|
#3 | | Media Officer / MOD
Join Date: Apr 2001 Location: vancouver
Posts: 28,081
Thanked 5,765 Times in 1,729 Posts
Failed 86 Times in 64 Posts
|
I'll play
my 99 accord, tsx projectors with smd5050 leds on custom board with custom voltage controller  
current: 07 accord with mini h1 v6.0 
wife's 07 accord with mini h1 v6.0, blockhoused 
Also, did a couple of my friends cars, tahoe, legacy, civic, prelude
| |
| | |
07-23-2015, 12:02 PM
|
#4 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| Quote:
Originally Posted by !Aznboi128  | Love that setup! Did you build the LED setup yourself?
| |
| | |
07-23-2015, 12:54 PM
|
#5 | | Media Officer / MOD
Join Date: Apr 2001 Location: vancouver
Posts: 28,081
Thanked 5,765 Times in 1,729 Posts
Failed 86 Times in 64 Posts
| Quote:
Originally Posted by sevenism Love that setup! Did you build the LED setup yourself? | yup, that was done with the help of a lot of people from hidplanet. moved away from leds now, just seems ricey.
| |
| | |
07-24-2015, 12:14 AM
|
#6 | | Diagonally parked in a parallel universe
Join Date: Mar 2012 Location: Vancouver
Posts: 1,445
Thanked 1,930 Times in 504 Posts
Failed 44 Times in 25 Posts
|
Not exactly retrofitted by me, but it is an HID retrofit nonetheless.
Super old pic of my car with the custom low-rise projectors.  
I really need to change out the bulbs to 4300K, right now it's at 6000K and a bit too blue for my liking. That, and get ballasts that actually match, lol.
| |
| | |
07-24-2015, 12:29 AM
|
#7 | | not the mod you're looking for
Join Date: Sep 2009
Posts: 3,744
Thanked 1,537 Times in 556 Posts
Failed 83 Times in 32 Posts
|
I'll play too!
Behold, my budget ebay kit that turned out amazing.
Before: 
After:   
My kit came with angel eyes (still on the fence about how they look), so I decided to use them as DRLs.  
Last edited by FN-2199; 07-24-2015 at 12:34 AM.
| |
| | |
07-25-2015, 11:12 AM
|
#8 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
|
2014 GMC Sierra upgrade stock halogen projectors to Morimoto FX-R 3.0 FULL BUILD THREAD 
Stock projector on the left, FX-R on the right 
BEFORE 
AFTER 
FX-R has huge color cutoff   | |
| | |
07-28-2015, 12:34 PM
|
#9 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
|
2007 Honda Civic with Morimoto FX-R 3.0 and Apollo 2.0 Shrouds FULL BUILD THREAD
BEFORE 
AFTER  
Output from factory reflectors with an HID kit 
FX-R output  | |
| | |
07-28-2015, 03:48 PM
|
#10 | | Meet on the Level and Part on the Square
Join Date: Apr 2013 Location: Squampton
Posts: 1,662
Thanked 2,093 Times in 669 Posts
Failed 187 Times in 69 Posts
|
Morimoto FX-R projectors, Morimoto bixenon ballasts/bulbs.
BEFORE: 
AFTER, with dual ambers added:  
Now blacked out, the chrome was peeling off the shrouds:  | |
| | |
07-28-2015, 03:49 PM
|
#11 | | What hasn't Killed me, has made me more tolerant of RS!
Join Date: Sep 2008 Location: vancouver
Posts: 166
Thanked 3 Times in 2 Posts
Failed 0 Times in 0 Posts
|
Mitsubishi Retrofit Evo / Ralliart / lancer / outlander without Oem projector.
parts:
G35 projector ( 4x )
E46 shroud
GTI-R shroud
Oem ballast/bulb Nissan.
and demon eyes!!!
Before and after IMG_3479.jpg IMG_3493.jpg IMG_3481.jpg IMG_3221.jpg
Last edited by m3lv_VIII; 07-28-2015 at 04:00 PM.
Reason: added spec.
| |
| | |
07-28-2015, 03:56 PM
|
#12 | | What hasn't Killed me, has made me more tolerant of RS!
Join Date: Sep 2008 Location: vancouver
Posts: 166
Thanked 3 Times in 2 Posts
Failed 0 Times in 0 Posts
|
Oem lancer Headlight $_12.JPG | |
| | |
07-28-2015, 04:00 PM
|
#13 | | I contribute to threads in the offtopic forum
Join Date: Jun 2013 Location: SRY
Posts: 2,632
Thanked 2,595 Times in 922 Posts
Failed 504 Times in 165 Posts
|
how much does a typical retrofit cost?
| |
| | |
07-28-2015, 05:16 PM
|
#14 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| Quote:
Originally Posted by Pidish how much does a typical retrofit cost? | A basic retrofit with Mini H1 or Mini D2S will cost roughly between $650-750 +taxes. All parts and labor are included in that price!
| |
| | |
07-30-2015, 10:01 AM
|
#15 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| | |
| | |
08-02-2015, 07:20 PM
|
#16 | | HELP ME PLS!!!
Join Date: Nov 2003 Location: Vancouver
Posts: 5,540
Thanked 980 Times in 166 Posts
Failed 399 Times in 67 Posts
|
how long is the process?
does the vehicle have to stay overnight?
| |
| | |
08-02-2015, 08:24 PM
|
#17 | | I STILL don't get it
Join Date: Mar 2011 Location: Burnaby
Posts: 460
Thanked 694 Times in 157 Posts
Failed 4 Times in 3 Posts
|
fx-r 3.0 projectors and low rise headlights.  | |
| | |
08-02-2015, 08:35 PM
|
#18 | | Head Moderator
Join Date: Dec 1982 Location: Great White Nor
Posts: 22,661
Thanked 6,462 Times in 2,081 Posts
Failed 98 Times in 51 Posts
|
I've been debating throwing projectors into my Saab. Lots of retrofits online but the common issue people have come across is that the OEM fluting tends to throw a bit of stray light upwards (high enough that it doesn't affect those in oncoming traffic). One solution is to buy clear lenses but the quality is apparently subpar and apparently yellows quite easily.
My question is this: How do you go about bypassing this issue? Just grind it off and reseal the glass?
Edit: This is what I'm referring to, although this particular image is talking about high beams  | |
| | |
08-02-2015, 09:05 PM
|
#19 | | #savethemanuals
Join Date: May 2008 Location: Richmond
Posts: 3,980
Thanked 2,551 Times in 950 Posts
Failed 106 Times in 40 Posts
|
Can you do custom angel eyes instead of a projector retrofit? Similar to what OSS does for bimmers.   | |
| | |
08-02-2015, 09:10 PM
|
#20 | | I STILL don't get it
Join Date: Mar 2011 Location: Burnaby
Posts: 460
Thanked 694 Times in 157 Posts
Failed 4 Times in 3 Posts
| Quote:
Originally Posted by Lomac I've been debating throwing projectors into my Saab. Lots of retrofits online but the common issue people have come across is that the OEM fluting tends to throw a bit of stray light upwards (high enough that it doesn't affect those in oncoming traffic). One solution is to buy clear lenses but the quality is apparently subpar and apparently yellows quite easily.
My question is this: How do you go about bypassing this issue? Just grind it off and reseal the glass? | I've thought about this as well when I had crazy ideas of putting my old minid2s 1.0 in a tercel for fun. i was thinking i would just grind a flat circle on the fluted area on the glass while leaving the rest of the fluted area untouched since the projector would only need that circle in the middle.
even if you couldn't re-polish the glass on the inside back to 100% clear, it would almost be good as it would blur out the cut-off just like some oem projectors...e46 stock projectors come to mind.
| |
| | |
08-04-2015, 08:31 AM
|
#21 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| Quote:
Originally Posted by alex.w *// how long is the process?
does the vehicle have to stay overnight? | I can usually get a retrofit done within one day if it's a bolt-on projector. For larger projectors or if there's painting involved the car has to stay overnight. Quote:
Originally Posted by Lomac I've been debating throwing projectors into my Saab. Lots of retrofits online but the common issue people have come across is that the OEM fluting tends to throw a bit of stray light upwards (high enough that it doesn't affect those in oncoming traffic). One solution is to buy clear lenses but the quality is apparently subpar and apparently yellows quite easily.
My question is this: How do you go about bypassing this issue? Just grind it off and reseal the glass? | I've seen people either sand down the oem lens so it's clear, or vacuum form a new clear lens using the oem lens as a template. Quote:
Originally Posted by Energy Can you do custom angel eyes instead of a projector retrofit? Similar to what OSS does for bimmers. | I can't build the angel eyes, but I can certainly install them!
Last edited by sevenism; 08-04-2015 at 08:52 AM.
| |
| | |
08-05-2015, 11:52 AM
|
#22 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
| | |
| | |
09-20-2015, 02:13 PM
|
#23 | | What hasn't Killed me, has made me more tolerant of RS!
Join Date: Mar 2015 Location: Nanaimo
Posts: 155
Thanked 219 Times in 62 Posts
Failed 21 Times in 2 Posts
| | |
| | |
09-25-2015, 10:45 AM
|
#24 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
|
Props on the custom shrouds/assembly, never quite seen it done like that before!
| |
| | |
09-25-2015, 11:03 AM
|
#25 | | RS.net Licensed Automotive Lighting Vendor
Join Date: Jun 2015 Location: Burnaby
Posts: 20
Thanked 14 Times in 8 Posts
Failed 0 Times in 0 Posts
|
Something a little different! This is my personal retrofit on my 2004 Honda CBR600RR.
All fairings re-painted to BMW white + gloss black & decals removed
Full black aluminum fairing bolt replacement kit from ProBolt
Pazzo levers
Flush mounted LED turn signals
Custom fender eliminator with license plate LED
2013+ Toyota Corolla LED projectors + red passive & active LED demon eyes FULL BUILD THREAD
BEFORE  
AFTER     
Last edited by sevenism; 09-25-2015 at 11:10 AM.
| |
| | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
All times are GMT -8. The time now is 07:43 PM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
