IS300 CX Racing Turbo Kit
 

SOLD


Well looks like plans may be changing. If someone is wanting this I would let it go right now, if not then I will end up installing it.

I have a brand new CX Racing Turbo kit for 02-05 Lexus IS300's.
Works with standard or auto. Allows you to retain your stock ABS pump location and A/C.

This kit has been used by a number of people on my.is with great results.

http://www.cxracing.com/product/cxra...C/images/2.jpg
http://www.cxracing.com/product/cxra...C/images/3.jpg
http://www.cxracing.com/product/cxra.../images/10.jpg


CXRacing GT35 Turbo + Intercooler Kit For 98-05 Lexus IS300 2JZ-GE NA-T

Brand NEW Design of Top Mount T4 GT35 Turbo Manifold with Equal Length and Long Tube Runner Design, Support Bigger HP and Higher Torque.

Bolt On Fitment, No Need to Relocate Anything. Turbo Is Positioned A Little Big Backward, to Free More Front Clearance, Keeps Stock ABS Unit (See Picture Below).

Intercooler Kit is Also Bolt Fit, Double Core Intercooler is New Design to Keep Factory Bumper Support Bar, It Maximizes Intercooler Cooling Capacity without Cutting Anything

3" Vband Downpipe and WG Dump Tube.

No Cut, No Relocation of Other Parts. Bolt On Fitment.


Application:
- Chassis: 2001-2005 Lexus IS300
- Motor: Toyota 2JZ-GE (Stock Motor)
- Turbo: T4 GT35 Turbo(0.68 AR Turbine Housing, Mid-End Power)


Product Being Sold:
- Turbo Manifold
- Downpipe with 3" Vband Clamp
- GT35 Turbo
- 46mm Wastegate with Dump Tube
- Intercooler+ Bracket
- Aluminum Piping Kit with BOV
- Black Silicon Hoses and Stainless Steel T-Clamps
- Oil Line Kit

This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.


Product Info and Spec:
Manifold:
- New Design with Turbo Placed Towards the Back, Offers Lots of Room in the Front to Clear Distributor and Engine Water Tube
- 11 Gauge Thick Wall 1.75" OD Elbow, 6-1 Merge Collector for Optimized Air Flow
- Keeps Factory ABS Unit

Turbo/Wastegate:
- GT35 Big Turbo, Supports 300-500 HP
- 4" Inlet, 2.5" Outlet
- 0.68 AR Turbine Housing, Fast Spool, Immediate Low End Power
- 3" Vband Exhaust Outlet
- 46mm Vband Wastegate, 8 PSI

Downpipe:
- 3" Stainless Steel
- 3" Vband to Turbo
- Comes O2 Sensor Bung
- 2nd Exhaust Pipe Connects to Factory Pre-Cat Position.

Intercooler：
- Double Bar & Plate Construction
- Bottom Core Thickness=4"
- Total Height=12"
- Inlet & Outlet=2.5"
- Comes with Mounting Brackets

Piping Kit:
- 3" Mandrel Bent Aluminum Pipe
- Comes with BOV, Silicon Hoses, and T-Bolt Clamps

Highlights:
- Especially Designed, Made for the Application Stated.
- Fully Tested, Simple Easy Installation.
- Offers Excellent Performance Gains.
- One of the Best Kits on the Market, with High Quality Products and Affordable Pricing.


I also have two gauge pods that I got to go with this. Orbitz Tripple dash pod that replaces the upper vent panel with a pod similar to that found in an STi. As well as a single gauge pod for above the steering wheel.
http://www.ortizcustompods.com/uploa...600481?9191819
http://www.ortizcustompods.com/uploa...86178_orig.jpg

Included with hose is GlowShift Boost, Oil Press, Oil Temp and Wideband gauges.

I also added some things to the kit like Samco Silicon vacuum lines, AN fittings for the oil return line, Oil pan return line bung. Studs for turbo manifold to make the turbo easier to mount and a bunch of other odds and ends to improve upon small things or add to the reliability.

The turbo kit has never been used or installed. I put the turbo on the manifold to check fitment and clock the housings. All of the turbo kit is brand new and un-used. The gauges are brand new as well as the pods. They were fitted to the car to insure fitment but never used.

For everything I'm asking $2500obo

For reference. They no longer use the turbo in the video, it was only used for the prototype kit.

Bump $3000 obo

Shoot me an offer. Need this gone.

$2900obo

Lowball me. You never know.

BUMP

$2800obo

Make and offer. I need this gone ASAP.

As pointed out, this kit does sell for $1799 on ebay. This is in USD and will cost over $200 Canadian BEFORE shipping and duties. Plus the custom pods and gauges were another $850usd. I upgraded all the vacume lines with Samco silicon vac hose, as well as proper silicone couplers, not the crap they give you with the kit. Same with the SS lines they gave me. The ones with the kit were absolute junk so I got proper line made to be used with oil. Along with that I also have wrap for the downpipe and hear shielding for the engine bay.

All together, after shipping, duties, taxes and conversion this setup cost me over $3500cdn. I dont have the car anymore and its up for grabs. Make an offer if interested, its taking up garage space and I want it gone.

BUMP

$2500obo

I need this gone NOW. Please low ball me and come take this kit.

Bump, $2000obo without the oil temp, oil pressure and wideband. $2500obo with those.

Boompity bump

BAMP, entertaining any and all offers for this kit. Shoot me something.

$2000 FIRM with everything, $1500 FIRM without gauges and gauge pods.

BUMP, $2000form for everything $1500 firm without gauges and gauge pods.

BUMP