PDA

View Full Version

: fs; misc oem engine parts civics eg ek 92-00


Sohc_turbo4
12-25-2007, 01:28 PM
just list of stuff getting rid of

z6 valve cover 92-95 si. i painted this back in summer but never used it. i primed it and painted with sikkens base coat the color is from a g35 named emerald mist. it is a metallic green and clear coated with dupont clear. this is actual autobody paint so wasnt cheap. if you want the H and honda back to silver thats not a problem. sell for $30
http://img402.imageshack.us/img402/5604/p5111700p.jpg


OEM civic d series header off an 95 civic will fit all d series. 02 sensor is taken off.
10 bucks
http://imgcash1.imageshack.us/img218/9881/p9040155qn3.jpg


oem nissin brake booster/ master cylinder 13/16 works perfect 95 civic cx drums rear 20
http://img241.imageshack.us/img241/8820/pc251214ap8.th.jpg

d16y7 intake manifold, fuel rail, regulator, all sensor mounts are good, and throttle body. 30

http://img210.imageshack.us/img210/1359/pc251215qs8.th.jpg
http://img241.imageshack.us/img241/7337/pc251218kr2.th.jpg
http://img241.imageshack.us/img241/6834/pc251219gu4.th.jpg

d15 valve cover from 93 civic sedan black powdercoat
$10
http://img407.imageshack.us/img407/6744/pb022279op9.jpg

Sohc_turbo4
01-13-2008, 01:18 AM
ttt

Sohc_turbo4
02-25-2008, 06:08 PM
ttt

Sohc_turbo4
03-19-2008, 06:21 PM
tttt

Sohc_turbo4
04-05-2008, 10:34 PM
to the top

Sohc_turbo4
04-16-2008, 09:33 PM
to the top

Sohc_turbo4
05-10-2008, 02:09 PM
to the top

Sohc_turbo4
05-28-2008, 08:00 PM
to the topss

RALLI
05-28-2008, 08:20 PM
you selling the one beside the headers (lower control arm) how much thanx

Sohc_turbo4
05-29-2008, 06:07 PM
sorry man sold those a while ago

Sohc_turbo4
06-23-2008, 06:45 PM
to the top

Sohc_turbo4
08-07-2008, 06:23 PM
to the top

Sohc_turbo4
09-03-2008, 06:33 PM
to the top

Sohc_turbo4
11-11-2008, 03:31 PM
to the top

Sohc_turbo4
11-16-2008, 07:08 PM
to the top

Sohc_turbo4
11-29-2008, 05:00 PM
to the top

Sohc_turbo4
12-08-2008, 06:51 PM
to the top

Sohc_turbo4
01-18-2009, 03:37 PM
to the top

Sohc_turbo4
01-30-2009, 05:12 PM
ttt

Sohc_turbo4
03-31-2009, 08:15 PM
ttt

hyek
04-05-2009, 06:55 PM
pm'ed

buddy
04-09-2009, 08:33 PM
just a question out of curiosity about the metallic green valve cover, can it withstands the extreme engine heat since you mentioned you used body paint ... and i have been told it requires special hi-temp paint ..

Sohc_turbo4
04-27-2009, 06:27 PM
with the primer underneath it will be fine. the valve cover doesnt get that hot.