RZZ
06-16-2008, 02:33 PM
1. P06 ecu, modified before but i took the s200 out from it. It was throwing code 21, you have to redo the vtec conversion parts and redo the chip on the ecu to make it working. 30 cdn obo
2. Used 1st generation miata front subframe
bought it from junk yard few years ago and paid 250cdn
asking 150cdn obo
3. Used 1st generation miata spark wires, 8mm taylor (for B6, 1.6l)
30cdn obo
4. hondata S200 on P28, no boost option
300cdn obo
5. stock USDM ITR tranny, no grind, around 130k km, stock gear ratio and stock LSD
1200cdn obo
6: 90-97 mazda miata cluster panel
10cdn
7. 2.5" T1R b-pipe and spoon N1 axle back, good condition, no dent
it won't be available until early September
500cdn
8. j's racing intake for DC/EG/EK w/no ABS
it is really beat up due to autox for 3~4 years
100 firm
9. ITR spec AEM cold air intake
siliver color
150cdn
11. some oem brand new miata suspension bushings (almost complete but missing left side front bushings)
60 firm
13. spoon rear tower bar for DC/EG
some scratches on the bar but other than that it is all good and solid
150cdn
14. 92-95 civic HB rear window, good condition w/ good defroster line
130 cdn
for any question, pm plz or post here
thx
all parts are located in Victoria BC
Would trade parts for:
- recaro/sparco/omp/bride bucket seat (black color only)
- for DC2R: apexi WS2, greddy SP2, greddy SE, tanabe medalion touring or spoon street type axle back
- hawk hp+ rear for DC2R
- 25mm spacer for 5x114.3 honda applicationw/ no studs
SOLD list:
15x7 +38 5zigen bronze FN01RC, good condition execpt 1" curb make on 1 wheel, w/ falken 912 205/50/15 (70% tread) w/ Ray nuts
front lip for 92-95 civic hb/coupe
Black JDM ITR Recaro SRD w/ driver side rail
RC370 injectors
Buddyclub specII catback
used T1R rear camber arm
used 290cc prelude OBD2 injector
used itr intake manifold
Used EG stock b-pipe and stock EG muffler
96 GSR rims
d16z6 swap
B18C5 block
used integra type r throttle body
tanabe super down springs
light weight B-series crank pulley
92/95 civic HB and 96-00 civic HB - magnaflow cat-back exhaust
stock ITR 22mm rear swaybar
asr rear subframe brace
Used EG stock oem half size radiator
front benson 3 point tower bar
4x100 13x7.5 +25 lenso rims with 225/50/13 hooiser A6
skunk2 pro front camber arms with energy suspension upper arm bushing
for any question, pm plz or post here
thx
all parts are located in Victoria BC
2. Used 1st generation miata front subframe
bought it from junk yard few years ago and paid 250cdn
asking 150cdn obo
3. Used 1st generation miata spark wires, 8mm taylor (for B6, 1.6l)
30cdn obo
4. hondata S200 on P28, no boost option
300cdn obo
5. stock USDM ITR tranny, no grind, around 130k km, stock gear ratio and stock LSD
1200cdn obo
6: 90-97 mazda miata cluster panel
10cdn
7. 2.5" T1R b-pipe and spoon N1 axle back, good condition, no dent
it won't be available until early September
500cdn
8. j's racing intake for DC/EG/EK w/no ABS
it is really beat up due to autox for 3~4 years
100 firm
9. ITR spec AEM cold air intake
siliver color
150cdn
11. some oem brand new miata suspension bushings (almost complete but missing left side front bushings)
60 firm
13. spoon rear tower bar for DC/EG
some scratches on the bar but other than that it is all good and solid
150cdn
14. 92-95 civic HB rear window, good condition w/ good defroster line
130 cdn
for any question, pm plz or post here
thx
all parts are located in Victoria BC
Would trade parts for:
- recaro/sparco/omp/bride bucket seat (black color only)
- for DC2R: apexi WS2, greddy SP2, greddy SE, tanabe medalion touring or spoon street type axle back
- hawk hp+ rear for DC2R
- 25mm spacer for 5x114.3 honda applicationw/ no studs
SOLD list:
15x7 +38 5zigen bronze FN01RC, good condition execpt 1" curb make on 1 wheel, w/ falken 912 205/50/15 (70% tread) w/ Ray nuts
front lip for 92-95 civic hb/coupe
Black JDM ITR Recaro SRD w/ driver side rail
RC370 injectors
Buddyclub specII catback
used T1R rear camber arm
used 290cc prelude OBD2 injector
used itr intake manifold
Used EG stock b-pipe and stock EG muffler
96 GSR rims
d16z6 swap
B18C5 block
used integra type r throttle body
tanabe super down springs
light weight B-series crank pulley
92/95 civic HB and 96-00 civic HB - magnaflow cat-back exhaust
stock ITR 22mm rear swaybar
asr rear subframe brace
Used EG stock oem half size radiator
front benson 3 point tower bar
4x100 13x7.5 +25 lenso rims with 225/50/13 hooiser A6
skunk2 pro front camber arms with energy suspension upper arm bushing
for any question, pm plz or post here
thx
all parts are located in Victoria BC