dustinb
01-15-2009, 08:08 PM
Well, do to massive detonation my motor with 50,000kms is now toast. So I have a 1.8L on the way, and a bunch of parts I can't use anymore. Now's your chance to get some awesome deals:
1. Powder coated valve cover:
This valve cover was done custom for me by Extreme Things in Seattle. It was powder coated green as a base, and then blue with gold sparkles as a finish. Extremely unique, and changes color depending on light / angle. In the picture there is some gasket material / oil on it, but cleans up perfectly.
http://www.dbmiata.com/miata/IMG_3549.jpg
$80
2. Adjustable Cam Gears *SOLD*
Completely brand new, never used. Good way to fine tune your motor.
http://www.dbmiata.com/miata/IMG_3548.jpg
$60
3. Stainless Header *SOLD*
Custom made by a gentleman in Seattle. Improved performance quite a bit, and sounds great. Needs a good polish, but welds and everything is flawless. Easy to install and bolts right up.
http://www.dbmiata.com/miata/IMG_3552.jpg
$80
4. Ported intake manifold *SOLD*
It has been painted blue with a high temp paint, and it has been ported to match the hondata thermal gasket. Much larger and smoother then stock. Throttle body not included.
http://www.dbmiata.com/miata/IMG_3554.jpg
http://www.dbmiata.com/miata/IMG_3555.jpg
http://www.dbmiata.com/miata/IMG_3556.jpg
http://www.dbmiata.com/miata/IMG_3557.jpg
$120
5. AEM F/iC fuel/ignition controller *SOLD*
This allows you to install larger injectors, retard timing based on manifold pressure, eliminate your Air Flow Meter, and record data through a wide band etc. This is an awesome unit, and has a built in MAP sensor. This also comes with a boomslang extension ECU harness, which I've wired all the AEM F/iC wires into (soldered and heat shrinked). The harness itself was $100 US, plus the hours it took to wire it.
http://media-images.rpmware.com/group-3fa42cef-c465-4ae2-a34c-7abcef6fcd42-350.jpg
$350
Send me a message here, or call / text my cell: 250-220-3491 if you have any questions. I live in Victoria, so I'm willing to ship items for actual shipping costs.
1. Powder coated valve cover:
This valve cover was done custom for me by Extreme Things in Seattle. It was powder coated green as a base, and then blue with gold sparkles as a finish. Extremely unique, and changes color depending on light / angle. In the picture there is some gasket material / oil on it, but cleans up perfectly.
http://www.dbmiata.com/miata/IMG_3549.jpg
$80
2. Adjustable Cam Gears *SOLD*
Completely brand new, never used. Good way to fine tune your motor.
http://www.dbmiata.com/miata/IMG_3548.jpg
$60
3. Stainless Header *SOLD*
Custom made by a gentleman in Seattle. Improved performance quite a bit, and sounds great. Needs a good polish, but welds and everything is flawless. Easy to install and bolts right up.
http://www.dbmiata.com/miata/IMG_3552.jpg
$80
4. Ported intake manifold *SOLD*
It has been painted blue with a high temp paint, and it has been ported to match the hondata thermal gasket. Much larger and smoother then stock. Throttle body not included.
http://www.dbmiata.com/miata/IMG_3554.jpg
http://www.dbmiata.com/miata/IMG_3555.jpg
http://www.dbmiata.com/miata/IMG_3556.jpg
http://www.dbmiata.com/miata/IMG_3557.jpg
$120
5. AEM F/iC fuel/ignition controller *SOLD*
This allows you to install larger injectors, retard timing based on manifold pressure, eliminate your Air Flow Meter, and record data through a wide band etc. This is an awesome unit, and has a built in MAP sensor. This also comes with a boomslang extension ECU harness, which I've wired all the AEM F/iC wires into (soldered and heat shrinked). The harness itself was $100 US, plus the hours it took to wire it.
http://media-images.rpmware.com/group-3fa42cef-c465-4ae2-a34c-7abcef6fcd42-350.jpg
$350
Send me a message here, or call / text my cell: 250-220-3491 if you have any questions. I live in Victoria, so I'm willing to ship items for actual shipping costs.