kent stacey
01-29-2009, 08:43 AM
hey guys i know im new here , i dont have much of vouch list but but up for sale i have ...
hasport k swap mounts for eg or dc $300
hybrid racing conversion harness $200
stock type s ecu ( needs to be kprod by hondata ) $300
hybrid racing fuel line kit ( from filter to rail ) $200
golden eagle fuel rail $100
aem fuel pressure regulator with gauge $150
hybrid racing swap radiator with hoses $300
04 TSX K24A2 longblock 200 hp and oodles of torque ( came from a auto so no tranny or flywheel ) $3000
OR $4000 IF BUYER BUYS ALL , OR WILLING TO TRADE PARTS FOR A CLEAN 92 - 95 EG PREFERABLY STOCK BUT YOU DONT SEE THAT OFTEN
I was going to use this stuff in a eg swap but im slowly losing interest in the hobby and only need my rsx . These parts are priced to sell good luck finding any cheaper in Canada and are necessities in a K swap . As it sits im losing over $1500 on these parts since i bought them and this was when our dollar was above US . I have other stuff as well but id have to talk to Geno Reda ( reputable builder tuner , im sure some of you may know him , only guy i trust to build my cars ) about what i have since we have it all stored in Kamloops. Motor is on a fresh crate stored as we speak along with all other parts .
other parts you will need to make this swap happen ...
kpro ecu
k swap header
rsx shifter box or the new hybrid racing shifter box
k series transmission and flywheel
rsx base model axles or driveshaft shop axles
other minor things refer to this link for all answers ( overkill ) http://k20a.org/forum/showthread.php?t=20860
12's are a given with a stock bolt on k24a2 in a eg , do some research youl find out for yourself.
COUPLE PICS ON KELOWNACIVICS.COM http://www.kelownacivics.com/forum/index.php?showtopic=2663
hasport k swap mounts for eg or dc $300
hybrid racing conversion harness $200
stock type s ecu ( needs to be kprod by hondata ) $300
hybrid racing fuel line kit ( from filter to rail ) $200
golden eagle fuel rail $100
aem fuel pressure regulator with gauge $150
hybrid racing swap radiator with hoses $300
04 TSX K24A2 longblock 200 hp and oodles of torque ( came from a auto so no tranny or flywheel ) $3000
OR $4000 IF BUYER BUYS ALL , OR WILLING TO TRADE PARTS FOR A CLEAN 92 - 95 EG PREFERABLY STOCK BUT YOU DONT SEE THAT OFTEN
I was going to use this stuff in a eg swap but im slowly losing interest in the hobby and only need my rsx . These parts are priced to sell good luck finding any cheaper in Canada and are necessities in a K swap . As it sits im losing over $1500 on these parts since i bought them and this was when our dollar was above US . I have other stuff as well but id have to talk to Geno Reda ( reputable builder tuner , im sure some of you may know him , only guy i trust to build my cars ) about what i have since we have it all stored in Kamloops. Motor is on a fresh crate stored as we speak along with all other parts .
other parts you will need to make this swap happen ...
kpro ecu
k swap header
rsx shifter box or the new hybrid racing shifter box
k series transmission and flywheel
rsx base model axles or driveshaft shop axles
other minor things refer to this link for all answers ( overkill ) http://k20a.org/forum/showthread.php?t=20860
12's are a given with a stock bolt on k24a2 in a eg , do some research youl find out for yourself.
COUPLE PICS ON KELOWNACIVICS.COM http://www.kelownacivics.com/forum/index.php?showtopic=2663