PDA

View Full Version

: FS: 1995 Integra GS-R (ITR Conversion)


Blue92
05-15-2009, 02:19 PM
Had this up for sale a couple of months ago, but now I really need to let it go. Decided to take classes in the summer, and need the cash to get me through the rest of school. This has by far been the most enjoyable car I have ever owned and a lot of time and money has gone into making it what it is now. I've been able to enjoy it, now it's someone else's turn.

http://img179.imageshack.us/img179/4439/dc2oct1900.jpg

http://img41.imageshack.us/img41/481/p1020312.jpg

http://img41.imageshack.us/img41/9303/b18co.jpg

Details:

1995 Acura Integra GS-R
Midnight purple II (OEM Nissan R34 GT-R colour)
JDM Front End conversion
JDM Si-VTEC designation badge
JDM ITR Front lip
JDM SiR-G Headlights
JDM side markers
‘97+ Mirrors (’95 mirrors included)
OEM ITR Doors & welded quarter panels (no side moldings)
OEM ITR rocker panels
OEM ITR rear spoiler
JDM Honda badges
OEM Rear wiper deletion kit (rear wiper included)
Michelin reflex type wiper blades

’00 JDM ITR Engine (Imported by $$$$$$$$$) New water pump, timing belt, spark plugs, throttle cable
USDM ITR transmission (4.4 final drive)
Spoon Sports Cam Gears (Generation 1)
NGK Iridium 8 Spark plugs
NGK Powercables (All blue Version)
Toda Power timing belt
Chipped P28 ECU (JUN program)
Mugen Baffled oil pan
Hasport Engine mounts (black)
Samco radiator hoses
Koyo aluminum racing radiator
Mugen thermostat
Mugen radiator cap
New OEM replacement battery (last winter)
JDM ITR catalytic converter (punched out)
JDM ITR mid-pipe
JDM ITR axle-back exhaust

JDM ITR Gauge cluster
JDM ITR fog light switch
Pioneer MP3 CD deck

BBS RZ (15x6.5) with falken zeix 512
ITR suspension
Carbonetic C-Spec front brake pads (DC2-R)
Carbonetic S-Spec rear brake pads (DC2 SiR)
Ev0garage special 4x100 slotted front brake rotors (DC2-R)
Ev0garage special 4x100 15mm spacer (set of two)
Project Kics 20mm extended wheel studs (set of eight)
Brembo blank rear rotors
OEM Honda DC2 front wheel bearings (set of two)
OEM JDM ITR front brake calipers
Earl’s stainless steel brake lines
Energy suspension bushing set
Energy suspension shift bushing set
OEM Honda ITR rear sway bar
Front & Rear ITR strut bars
Custom made trunk & C-pillar bars

All maintenance & service performed by Ev0garage
Oil changes with Motul Synthetic & new HAMP oil filter every 4000 km or less
Motul “engine clean” every 3rd oil change
Transmission fluid changed every 10,000km with Motul
Brakes serviced once a year (minimum) -2 brand new rear calipers in the last year
Replaced clutch master
Only ever used 94 Octane Chevron gasoline
Aircare until August

Chassis: unsure (probably around 230,000km)
Paint/bodywork: ~35,000 km
Engine: Unsure (but engine was built in late 1999 for 2000 Model Year according to the stamp on the head) I've put ~25,000 km on it
JDM cluster reads 97,XXX km

As described above: $8,888

Please contact me if you'd like to come take a look, I will not be posting more pictures. Thanks!

Relyk
05-15-2009, 04:32 PM
soo nice, bump for clean integra good luck with sale fitment is super clean

G2Noob
05-15-2009, 04:58 PM
Woooow, if i had the extra cash, this car is mine.
Guy, good luck with the sale of such a beautiful piece of engineering.
Free bump!

thumper
05-16-2009, 07:38 AM
dammit there is so much of this "$$$$" censorship in this thread :cry:

does the car have clean title? is the front end oem steel? had to ask because i went with a friend to look at another jdm conversion that turned out to be a nasty cheap fiberglass copy that made us cry.

vOLTZ
05-16-2009, 08:22 AM
the front end is all honda original parts

Blue92
05-16-2009, 10:34 AM
$$$$ = Ev0garage...

Front end is all OEM as Voltz has stated. I'm the second owner and I don't know of anything that would give the car anything but a clean title, thanks!

hyek
05-16-2009, 10:41 AM
very nice ride
good luck on sale

jaemc
05-16-2009, 02:31 PM
XD see yur car all the time driving to work ... live near ya lol bump for nice car =]

drunkrussian
05-16-2009, 02:58 PM
awesome looking front, gl with sale

Blue92
05-18-2009, 01:15 AM
thanks, bump!

Blue92
05-19-2009, 10:07 AM
ttt

daval
05-19-2009, 11:12 AM
ever dynoed ur vehicle?

Blue92
05-19-2009, 03:56 PM
Nope...from what I've read should be in the 195whp/130wft-lbs range...

5 Zigen
05-20-2009, 12:47 AM
wow 195whp? from which dyno?

very nicely done, i wish i could have repainted mine to that color...

twitchyzero
05-20-2009, 10:35 AM
outta curiousity..how much did that paint job cost?
free bump

Blue92
05-20-2009, 11:21 AM
Never had it dyno'd, just a gues based off the "great header test" on h-t, and the butt dyno =P

Hard to say how much just hte paint was. Front end, doors, and deleted side moldings were all done at the same time. Friends did it for me so the price was discounted.

Blue92
05-21-2009, 05:42 PM
bump

quan
05-21-2009, 06:34 PM
bump for a sick looking ride and a nice guy to deal with

Blue92
05-23-2009, 03:19 AM
Thanks!

Enkei's have been sold. New prices in 1st post.

Blue92
05-25-2009, 12:57 AM
ttt

Blue92
05-26-2009, 10:16 AM
bump, parts list and price update. $9500 take it.

Blue92
05-28-2009, 06:48 PM
9500 obo!

Blue92
05-31-2009, 04:39 PM
bump.

yongliao
06-01-2009, 10:44 AM
woooow, thats sick man. fuck im looking for a stock one tho..

yojo419
06-01-2009, 04:00 PM
interested. do u have more pics? plz send to joetang438@hotmail.com
can i take a look of the car..
thz...

Blue92
06-02-2009, 06:18 PM
e-mailed.

Blue92
06-04-2009, 09:21 AM
ttt

hurostyle
06-05-2009, 10:00 PM
would you be interested in a trade?
http://www.revscene.net/forums/fs-2000-jetta-t578212.html

Blue92
06-08-2009, 01:51 PM
^Sorry, not at the moment. ttt

Mattster101
06-08-2009, 04:07 PM
Very nice car.

Blue92
06-11-2009, 09:51 PM
Thanks! Price lowered... Will not go any lower from here on in. $8888.

Blue92
06-14-2009, 05:33 PM
ttt, $8800 price includes Cusco Zero-II Coilovers and Skunk 2 Pro + camber kit!

Chickenball
06-15-2009, 01:04 PM
Bump for a guy that lives down the street from me! I would be all over this car if it weren't for the fact that I am head deep in my own project!

Blue92
06-16-2009, 03:51 PM
^Thanks dude.

Blue92
06-18-2009, 12:25 AM
bump!!

vchen14
06-18-2009, 04:12 AM
what kind of wheels are mounted on the car currently?

Blue92
06-18-2009, 10:15 AM
BBS RZ (15x6.5) +33 with falken zeix 512

Blue92
06-21-2009, 09:54 PM
bump :thumbsup:

oldsnail
06-22-2009, 09:23 AM
What basic options does this have? I can see there are power windows.
A/C? Power door locks? keyless/alarm?

Blue92
06-22-2009, 10:52 AM
A/C and cruise control were removed. Car has power windows, power sunroof, power steering, power locks, remote locks, ABS and fog lights.

ackjaman
06-23-2009, 12:04 AM
bump for a very clean car

Blue92
06-24-2009, 01:37 PM
Thanks, to the top again please!

Pocakj
06-28-2009, 02:53 PM
saw this yesterday! It's nice!

Bump!

bigbadboss101
07-01-2009, 07:26 AM
edited

Blue92
07-01-2009, 09:02 PM
Thanks for your interest, car has just been sold.