PDA

View Full Version

: FS: set of Koni RACE Shocks for Mini Cooper

AP1miata
10-08-2009, 01:09 PM
(4)Koni RACE valva(not the normal Koni Yellow)
Shocks only no spring....dun need aftermarket spring, i put on stock spring and it work really good.
much better than Tein Flex, JIC, Zeal etc....any real racer will prove it.
used for 1 year.
$600
brand new cost $1500
boatcaptain
10-08-2009, 03:19 PM
any pics?
AP1miata
10-13-2009, 03:22 PM
will take soon!!
AWDTurboLuvr
10-13-2009, 04:22 PM
Are these the 2800 series? What's the serial # on them?
AP1miata
10-14-2009, 08:43 AM
no man, $400 for 28series?? even $400 for koni race is cheap...
koni race look the same as koni yellow BUT with different valving.
also i do belive those are the best shocks in B.C for Mini
AWDTurboLuvr
10-15-2009, 03:34 PM
I hear ya, I'm just wondering since I've never seen any before...where did you get them from? You can PM if you want to...
SumAznGuy
10-15-2009, 06:00 PM
Shocks were bought new and revalved by Pro-parts USA in California.
http://www.propartsusa.com/information.php?info_id=15
AWDTurboLuvr
10-16-2009, 02:41 PM
Shocks were bought new and revalved by Pro-parts USA in California.
http://www.propartsusa.com/information.php?info_id=15

Ah cool, thank you. So it's valved currently for stock springs? I would ideally swap out my existing suspension and get some swift springs in conjunction with these.
AP1miata
10-16-2009, 03:12 PM
thoes are really aggressive valving and can handle up to 600lbs spring rate...oh btw i also got the dyno chart for the shocks i have...