PDA

View Full Version

: Check out this ghetto setup!


Mananetwork
10-30-2009, 12:46 AM
When photographing weddings or events lighting is key! I typically alternate between the single strobe 580ex mounted on the camera or the offshoe flashes triggered by pocket wizards. I came to a conclusion that both are great in their craft, but both lack what the other needs.

Forexample; the offshoe flashes are stationary, so if your subjects not moving your in the clear! Unfortunetaly this hardly happends at any event or wedding!
The hotshoe flash is great because it travels with you everywhere! It's draw back is the light can be very flash and pretty boring!

What if you can use both! Well now I can :D

http://farm3.static.flickr.com/2565/4057173153_e8bfef6556.jpg
http://farm3.static.flickr.com/2772/4057914782_a3de24e1e4.jpg

Here's my ghetto setup so far. I tried it around the house and it worked well, but I think it needs to be put through a real test.
**Works really really well if your lens has a tripod collar, but not all lenses have one

Mananetwork
10-30-2009, 12:47 AM
Next best thing to do is find a shorter screw!

Senna4ever
10-30-2009, 12:54 AM
LoL....whatever works! :D

mboldt
10-30-2009, 07:32 AM
PW's come with Velcro for a reason! Haha

Mananetwork
10-30-2009, 09:17 AM
PW's come with Velcro for a reason! Haha

Try selling these after when your 580ex and PW have Velco all over it!
Velco it to what anyway, the top of the 580ex? When your swinging the camera around it's going to fly off!

Nismo200SX
10-30-2009, 02:39 PM
if you use industrial strength velcro which is something like $14 for 4ft at canadian tire. that stuff is hard as hell to remove. any amount of swinging isn't going to move, unless of course it hits something then it might come loose a bit.

bikerx
10-30-2009, 05:47 PM
what you need is velcro straps... like the type you use to velcro ski's together :P it worked great till someone jacked mine :( they're elastic too :)

Meister1982
10-30-2009, 09:22 PM
Try selling these after when your 580ex and PW have Velco all over it!
Velco it to what anyway, the top of the 580ex? When your swinging the camera around it's going to fly off!

so you buy your stuff to resale it?

+Kardboard+
10-31-2009, 01:04 AM
Next best thing to do is find a shorter screw!
Temptation to take out of context........overwhelming. :haha:

MikesJo
10-31-2009, 02:14 AM
Try selling these after when your 580ex and PW have Velco all over it!
Velco it to what anyway, the top of the 580ex? When your swinging the camera around it's going to fly off!

You're not going to resell those pws cause you'll always use them!

Soundy
10-31-2009, 02:18 AM
I'd still buy a 580EX even if it had velcro glue on it - 420EX = old and boring, needs to be upgraded!

Mananetwork
11-02-2009, 09:44 AM
The velcro crap looks so ugly too!!

None the less the setup works wonders!
This resolved another problem that I had in the past. Another thing that bothering me about the off-camera flashes was focusing in pitch black conditions. I just turned off the flash and used IF to help me focus