[RacingGreed]

Time: January 23, 2010 / 9:00 to 6:00pm, first come first serve!!!!

Place: Racing Greed, 641 Lougheed hwy, Coquitlam BC

Price: $60 for 3 power pulls.
You will receive a dyno sheet with Horsepower, Torque, Air/Fuel Ratio, and Boost.

[GabAlmighty]

If i show up can I get a free one? It would be a nice joke to see my car run and would ensure much merry making by everyone attending.

[Mugen EvOlutioN]

shit tats cheap

[impactX]

Yeah, it's a good deal. I remember seeing the same price being offered by others... 10 years ago.

[bcrdukes]

Wow, that is cheap! Typically in the past, it's $60 for 2 runs! :eek:

[Spaceship_coupe]

Dyno the MR2 Mike!!

[mike_cool79]

Do you guy's have an AWD dyno if you do I'm so in on this!!

[Spaceship_coupe]

Yes they do...says so in the OP sig.

[bcrdukes]

Dyno the MR2 Mike!!

LOL! As much as I would love to, the MR2 is sleeping for the winter. I would really like to get some baseline numbers, however.

You sir, are a source of negative motivation. :D

[Spaceship_coupe]

LOL! As much as I would love to, the MR2 is sleeping for the winter. I would really like to get some baseline numbers, however.

You sir, are a source of negative motivation. :D

Hahaha...I would dyno my car but it needs an alignment. :D

[Volvo-brickster]

i have to work at 11:30 that day :(

how long does 3 runs take on average ?

[CorneringArtist]

I wonder how much it would be for one pull...I wanna see how much power Mike's Cressida is pulling now that I have it.

[Qasual]

This is so worth coming an hour early for, count me in !

[TypeRNammer]

If you guys are slammed, just beware how the car rolls on the dyno :haha:

Don't worry though, Racing Greed does their best to not scrape your car going up and down the ramp.

http://www.youtube.com/watch?v=YHWb4cK09SI

[jeff_alexander]

Do you guys dyno motorcycles?

[TypeRNammer]

Do you guys dyno motorcycles?

They did a Yamaha R6 last time:thumbsup:

[bcrdukes]

Hahaha...I would dyno my car but it needs an alignment. :D

Actually, I do too and that is the main reason she's in storage. :D

[roastpuff]

I'm so going to be there. Woohoo, dyno time!

[!Aznboi128]

Actually, I do too and that is the main reason she's in storage. :D
wait, has your mr-2 EVER seen sun? lol your garage queen never leaves her home

but 60 bux wow.... should I dyno my grocery getter? LOL

[bob_chan]

is this an awd dyno? :D

[Qasual]

If you guys are slammed, just beware how the car rolls on the dyno :haha:

Don't worry though, Racing Greed does their best to not scrape your car going up and down the ramp.

http://www.youtube.com/watch?v=YHWb4cK09SI

Bwa'hahahah, will I see you there on Dyno day ?


:haha:

[AVS_Racing]

u guys dyno autos? lol + do u have to do all 3 runs at once? or u get to do some tinkering and see the hp difference

[Iceman-19]

Diesel truck cool?

[J-Chow]

oh snap, I might drop by.

Wanna see how much shit hp my 2.5i makes.

[TypeRNammer]

u guys dyno autos? lol + do u have to do all 3 runs at once? or u get to do some tinkering and see the hp difference

Yes they do auto too, they had a C63 AMG, and it was loud as hell....for stock...

[asian_XL]

78 whp? LOL

[GabAlmighty]

I might show up. Would be nice to get a solid baseline for future reference.

[TypeRNammer]

78 whp? LOL

:(

[RacingGreed]

For extremely lowered cars, we can use just one roller so it doesn't damage side skirts.

And we can dyno auto and diesel.

[Jeffield]

Yes they do auto too, they had a C63 AMG, and it was loud as hell....for stock...

Was that Ken's??

The black one?

I might drop by... I want to see my sheets

[!Aznboi128]

:(
it's just your motivation to get a k20 in your trunk :)

[roastpuff]

Nice, 78whp! :haha:

[RacingGreed]

We had firefly that did 37whp!!!!
That's lowest record.
It will be fun if someone can break the record.

[GabAlmighty]

Was that Ken's??

The black one?

I might drop by... I want to see my sheets

No

[Iceman-19]

Hahhaha 37whp. Epic. At what RPM?

[Klutch]

man im down for thissss

[00EM1]

for 60 bucks im there just to have dyno sheet to put up in my garage like all the cool people

[jeff_alexander]

We had firefly that did 37whp!!!!
That's lowest record.
It will be fun if someone can break the record.

I am going to bring a bicycle.

[NeoDestinyZ]

My car might jerk a bit forward and wiggle side by side, is there any good harness or strap for RWD? Might need to put a guy in my trunk.

[TOPEC]

oh snap, I might drop by.

Wanna see how much shit hp my 2.5i makes.

u serious?! lol
i'll come and watch u

[1exotic]

My car might jerk a bit forward and wiggle side by side, is there any good harness or strap for RWD? Might need to put a guy in my trunk.

like this? :-D

http://www.youtube.com/watch?v=DV6siknODUg

[mike_cool79]

Do I have to reserve a spot or do I just show up that day cause I'm going to be coming over from Victoria. Wouldn't want to go to van just to realize that you had to reserve a spot before coming.

[Inaii]

We had firefly that did 37whp!!!!
That's lowest record.
It will be fun if someone can break the record.

hahaha that's awesome! totally tempted to take the fb but I think my brother's working that day so there goes the driver lol. I could totally break that record ;)

[Muskys SS]

Do I have to reserve a spot or do I just show up that day cause I'm going to be coming over from Victoria. Wouldn't want to go to van just to realize that you had to reserve a spot before coming.

It's first come first serve. If you get over here early morning it shouldn't be a problem to get in.

[00EM1]

I told a few of my friends about it and they wanted to know if you can dyno full size diesels.
the first trucks a 95 ram 2500cummins 12 valve,
and my other buddy has a 06 ram 2500 with a 5.9 cummin's but he has tried to get it dyno'ed before and they couldn't find the tach wire or something.

[Mr.Jay]

nice

I kinda curious to see what my civic hb will put down, not expecting much just kinda nice to know

[mekaw]

when i did my baseline dyno on a 1.6l miata i put down 85 rwhp.

If i can get my car tuned before the dyno day I'd be curious to see how much power I've gained with boost

[Peturbo]

$60 only? I might just come because of the awesome price.
See how low in power my integra really is. lol.

[RacingGreed]

Cool, it's gonna be a fun day for us.

[J-Chow]

just a question out of curiosity, but how long estimately, does it take to setup and prepare one vehicle for a dyno run? ie... wait times for each car etc..

[RacingGreed]

It usually takes about 10-15 min to set up a car and do 3 pulls. Usually, it takes little longer with extremely lowered cars. On the last dyno day, we did 27 cars (9:30 to 4). Waiting time is depends on the flow, but last time, it was less than an hour.

[jeff_alexander]

How does the 1/4 mile simulation work?

[bcrdukes]

It usually takes about 10-15 min to set up a car and do 3 pulls. Usually, it takes little longer with extremely lowered cars. On the last dyno day, we did 27 cars (9:30 to 4). Waiting time is depends on the flow, but last time, it was less than an hour.

That's a pretty number of cars within that timeframe. IIRC, the last last last RS dyno day @ Kinetic, we got 25 or 27 cars in until 3:30pm but everybody only got 2 runs.

[RacingGreed]

How does the 1/4 mile simulation work?

To do 1/4 runs, you need to know the exact weight of your vehicle and hp @ 50 kmh.

It's pretty accurate, but you can not really launch the car, cause it gets little scatch when you launch your car hard on the dyno.

[TypeRNammer]

Who's all going tomorrow :)

I might drop by to check it out, but don't think I'll be rolling on the dyno though.

Still have to adjust my timing on the motor.

[Iceman-19]

Im thinking about bringing the F-350 by.

[J-Chow]

so tempted to . . . but gotta wake up so early to sign up and register . . . argh..

[roastpuff]

Bringing like 5-6 GTI's there, haha. :D

[JoshuaWong]

sigh... wanted to go so bad... but HPFP just gave out this morning, gayass bmw. :(

[Iceman-19]

Gonna head down there. Hope you guys like black smoke. :D

[Iceman-19]

Its busy here, so if anyone was planning on coming and hasn't should hurry the hell up.
Posted via RS Mobile (http://www.revscene.net/forums/announcement.php?a=228)

[civic_sir85]

is it packed??

[roastpuff]

Ugh, what a heartbreaker dyno. :(

150WHP - 25% conversion factor as I was told - 200 crank.

Was hoping for better.

[civic_sir85]

Ugh, what a heartbreaker dyno. :(

150WHP - 25% conversion factor as I was told - 200 crank.

Was hoping for better.

what type of car??

[roastpuff]

what type of car??

2010 GTI, stock. Rated 200 crank hp.

[civic_sir85]

dang, was it busy?? im thinkin of going and bring my 01 integra

[bcrdukes]

Ugh, what a heartbreaker dyno. :(

150WHP - 25% conversion factor as I was told - 200 crank.

Was hoping for better.

For a FWD car, it really should be 15% but because transmissions are so much more efficient than they used to be, I'd say anywhere between 10-12% is a good number. Don't be upset - all it is is just a number. Different dynos provide different output values and this is normal. If you plan on making any performance modifications later on, it is best to go back to Racing Greed so that way you can compare your baseline to your next dyno run in order to be able to get a fair comparison before & after.

[Iceman-19]

They are giving a higher correction factor because it is a Mustang Dyno, and they read lower then other dynos. I made 238rwhp/487rwtq. Corrected from Shawn it was 340hp and 700lbsft at the crank.

[Leopold Stotch]

For a FWD car, it really should be 15% but because transmissions are so much more efficient than they used to be, I'd say anywhere between 10-12% is a good number. Don't be upset - all it is is just a number. Different dynos provide different output values and this is normal. If you plan on making any performance modifications later on, it is best to go back to Racing Greed so that way you can compare your baseline to your next dyno run in order to be able to get a fair comparison before & after.

Yea my G35 dyno'd at just under 200 I wanted to end myself. Now the tuning starts
Posted via RS Mobile (http://www.revscene.net/forums/announcement.php?a=228)

[jeff_alexander]

I just woke up...shit fuck.

[JoshuaWong]

^ lol same... is it too late to rush over there now ? I wana get my car dyno wif v3 before freaking HPFP fully dies....

[TypeRNammer]

I just woke up...shit fuck.

^ lol same... is it too late to rush over there now ? I wana get my car dyno wif v3 before freaking HPFP fully dies....

shit, i woke up not too long ago too:haha:

[JoshuaWong]

I just woke up...shit fuck.

shit, i woke up not too long ago too:haha:

lol is it too late to rush down there ? when do they close ?

[jeff_alexander]

lol is it too late to rush down there ? when do they close ?

9:00 to 6:00pm gentlemen, 9 to 6

[TypeRNammer]

lol is it too late to rush down there ? when do they close ?

The last time I went there was a long line in the afternoon, I remember going in the morning and I was 7 cars behind the line up:eek:

[optiblue]

hmmm any updates on the line up? I'd probably be like a last minute drop in if at that...

[GabAlmighty]

How was it?

[Roach]

That dyno is a dream crusher. I think my car put down only 213whp/226 lb/ft of torque last time I went.

I thought something was wrong with my car at first.

Kev

[bcrdukes]

I just woke up...shit fuck.

Living on London time, aren't we? :lol

[jeff_alexander]

That dyno is a dream crusher. I think my car put down only 213whp/226 lb/ft of torque last time I went.

I thought something was wrong with my car at first.

Kev

What car?

[Bath Tussue]

i lost over 40whp since the last time i was there...
but on the bright side, there is barely any knock (while on the dyno anyway... the knocks came back when i was driving on the street...)

[trollguy]

What car?


1993 GTI with rusted hood

[nickmak]

whens the next dyno day? i had to work today, i want to dyno my car before and after i swap the head!

[Muskys SS]

It was another successful day. It was nice to see some old faces and meet some new ones. A lot of nice cars making good power.

480awhp R32 GTR
427awhp 2009 GTR
380awhp 2007 Subaru STI
363whp C63 AMG Benz
358whp C63 AMG Benz
340ish wtq from the 335D bmw
black smoke and 490wtq from Iceman's F350 Diesel

[Muskys SS]

They are giving a higher correction factor because it is a Mustang Dyno, and they read lower then other dynos. I made 238rwhp/487rwtq. Corrected from Shawn it was 340hp and 700lbsft at the crank.

It might actually be more at the crank then that. I was only factoring in 20% drivetrain loss and the fact that our dyno reads around 10% lower then actual. Don't those big diesels have like 25%loss or more through the drivetrain? At 25% drivetrain loss your truck is making 366hp and 749tq at the crank.

[Iceman-19]

That would make a bit more sense, some of the guys on powerstroke.org suggested I should be making around 290rwhp with the mods I have done.

[Iceman-19]

Oh, and if anyone has any videos of my truck, could you post them please? Thanks!

[reza]

put down 231awhp/238awtq, satisfied with the results. i was expecting like 180/200.
who was the operator and the driver? two of the coolest guys i met.
also the 350 was badass

[Roach]

What car?

'07 Mazdaspeed 3.

Kev

[Roach]

1993 GTI with rusted hood

You're confusing me with tegman.

Kev

[Muskys SS]

put down 231awhp/238awtq, satisfied with the results. i was expecting like 180/200.
who was the operator and the driver? two of the coolest guys i met.
also the 350 was badass

Thanks Reza, I was the operator and Tommy was the driver. Your car was running strong for all stock

[freakshow]

Great dyno day, thanks guys.
My car was thinking that we were just doing an insane burnout, so it cut off fuel at 5500 RPM. I can remove some fuses to prevent that next time I come..

[kchan]

^
freakshow, next time u go let me know
ill come too :D

[Roach]

It was another successful day. It was nice to see some old faces and meet some new ones. A lot of nice cars making good power.

480awhp R32 GTR
427awhp 2009 GTR
380awhp 2007 Subaru STI
363whp C63 AMG Benz
358whp C63 AMG Benz
340ish wtq from the 335D bmw
black smoke and 490wtq from Iceman's F350 Diesel

Wow awesome numbers!! Especially the R32 GTR, STI and the 335D!

Kev

[jing]

480awhp R32 GTR
427awhp 2009 GTR


http://www.lolwut.com/layout/lolwut.jpg

[Qmx323]

LOL owned...

GT-R making less power than a r32 and the r32 weighs less LOL

[RacingGreed]

i lost over 40whp since the last time i was there...
but on the bright side, there is barely any knock (while on the dyno anyway... the knocks came back when i was driving on the street...)


To data log everything properly on the dyno (especially knock), we have to put some load on the dyno when doing pulls. But, since it was a dyno day for power numbers, we had no load on the dyno at all. However, on our dyno, load or no load doesn't change the power reading.

[TOPEC]

LOL owned...

GT-R making less power than a r32 and the r32 weighs less LOL

does it even come accross ur heads that maybe the R32 is highly tuned where as the R35 was STOCK???

[TOPEC]

and to RG, just curious why the sti pulls were done in 3rd gear?
its usually done in 4th some maybe even 5th.

[RacingGreed]

and to RG, just curious why the sti pulls were done in 3rd gear?
its usually done in 4th some maybe even 5th.

STI pulls were done in 4th gear, 100% sure about that cuz I was driving it on the dyno. Except one or two cars which had hard time to finish the pull in 4th gear, every pull was done in 4th gear.

That R32 was highly tuned racing car, stock R32 will do about 200 at the wheel.

[verkion]

To data log everything properly on the dyno (especially knock), we have to put some load on the dyno when doing pulls. But, since it was a dyno day for power numbers, we had no load on the dyno at all. However, on our dyno, load or no load doesn't change the power reading.

Hrm...I'll have to come back some other time to re-dyno with a load! :-P My Evo pulled huge amounts of timing! I had a massive (very scary) number of knock sums...and I noticed that I was in totally different load cells than what I normally log on the road! On the road, nothing, 0 knock sums, no timing pulled. I logged right after that on the way home cause the knock counts were so scary!

Anyways, thanks for having the dyno day!
verkion

[Vale46Rossi]

STI pulls were done in 4th gear, 100% sure about that cuz I was driving it on the dyno. Except one or two cars which had hard time to finish the pull in 4th gear, every pull was done in 4th gear.

That R32 was highly tuned racing car, stock R32 will do about 200 at the wheel.


C63 dynos a lot higher with 5th gear pulls.

[Iceman-19]

C63 dynos a lot higher with 5th gear pulls.

You dyno in whatever gear is a 1:1 rato, and that is generally 4th gear.

[Jackygor]

C63 dynos a lot higher with 5th gear pulls.

The C63 has 7 gears, so the 5th gear is I believed 1:1.

[Qmx323]

does it even come accross ur heads that maybe the R32 is highly tuned where as the R35 was STOCK???



what about cost, do think 100k+ was put into the r32?
and no i only have 1 head

if 100k+ was invested then hats off to the owner my bad for jumping to conclusions

[ToyotaPowah]

That dyno is a dream crusher. I think my car put down only 213whp/226 lb/ft of torque last time I went.

I thought something was wrong with my car at first.

Kev

Kev, what did you put down at Miller Performance last summer? If I got the right guy, I think you were there right before I was. I believe that was a mustang dyno as well.

[Vale46Rossi]

C63 dynos a lot higher with 5th gear pulls.

The C63 has 7 gears, so the 5th gear is I believed 1:1.



thats what I thought, my friend has a c63 and he dyno'd a lot higher with 5th gear

[Jackygor]

thats what I thought, my friend has a c63 and he dyno'd a lot higher with 5th gear

what was his power?

[mpr]

I logged right after that on the way home cause the knock counts were so scary!


Find out what the problem was?

[TOPEC]

what about cost, do think 100k+ was put into the r32?
and no i only have 1 head

if 100k+ was invested then hats off to the owner my bad for jumping to conclusions

i know u have 1 head, i was referring to u and the other guy that posted the lol wut picture, but his quote didnt show up.

and ur comparing a highly modified car's power to a bone stock car's power, that isnt a fair comparison is it now?

[Vale46Rossi]

what was his power?

I asked and he said 400whp stock.

[hk20000]

Here are some videos.

The power figures maybe wrong because I could only hear what I could hear from the sideline. If you know the power figure is wrong, click it and comment with the correct power thanks.

http://www.youtube.com/watch?v=tzD57m7joaQ
http://www.youtube.com/watch?v=KNGMHr6UKqM
http://www.youtube.com/watch?v=sxtgWAKcyCw
http://www.youtube.com/watch?v=RH2_Ju3HEX8
http://www.youtube.com/watch?v=Xl5pfwUCtw0
http://www.youtube.com/watch?v=u6YjxCr8m0U
http://www.youtube.com/watch?v=NgFfI3_L_n0
http://www.youtube.com/watch?v=d-suVedYmMo
http://www.youtube.com/watch?v=HqFWveq4HXY

[TOPEC]

the first vid, the car and the guy in the middle of the video looks awfully familiar..................

i wonder who he is??

[jeff_alexander]

the first vid, the car and the guy in the middle of the video looks awfully familiar..................

i wonder who he is??

I don't see this person you're describing of, but I do see a giant moving mass blocking almost half of the video.

Some say his dragon pants emit flames at night and that his cousins hijacked his account, all we know is hes not the Stig, but he is the Stig's morbidly obese chinese cousin!

[smk]

the first vid, the car and the guy in the middle of the video looks awfully familiar..................

i wonder who he is??

Is it the one and only... wait, where are the dragon jeans

[StealthFighter]

Is it the one and only... wait, where are the dragon jeans

his fat ass ripped them when he tried to sit down.

[RacingGreed]

thats what I thought, my friend has a c63 and he dyno'd a lot higher with 5th gear

We dyno'd the c63 in 5th gear. On our dyno, the numbers don't change that much when dynoing in different gears. We decide what gear to use on each car by how long it takes to finish the pull without using any electric feedback. So basically we use the inertia from the rollers alone for the load and then choose a gear that will give a nice steady pull time. Higher gears on powerfull cars and lower gears for milder cars. Some cars have a difficult time to spin the rollers when using 1:1 transmission ratio gear. The car take way to long to complete the pull.

[Greenstoner]

xxxxxxxxxxxxxxxx



not gonna bash

[Iceman-19]

Thanks for posting the videos.

[yoall]

does anyone know what the cressida put down?

[skyxx]

I don't see this person you're describing of, but I do see a giant moving mass blocking almost half of the video.

Some say his dragon pants emit flames at night and that his cousins hijacked his account, all we know is hes not the Stig, but he is the Stig's morbidly obese chinese cousin!

If you searched for just his first name in google. He's the first link. :lol

[1exotic]

lol at the truck video with the black smoke... those R35 rims look awesome, car sounds sick.

[SHIFT_drift]

does anyone know what the cressida put down?

175whp. Stock 7MGTE.

[Iceman-19]

lol at the truck video with the black smoke... those R35 rims look awesome, car sounds sick.

Its a diesel....you do understand right?

[jing]

does it even come accross ur heads that maybe the R32 is highly tuned where as the R35 was STOCK???
Look at the dyno vid. Exhaust is not stock.

[yoall]

175whp. Stock 7MGTE.

Thanks, thats pretty good for a car that age. Wish i still had my cressida.

[GabAlmighty]

I've seen some diesels make mucho more smoke ahah

Jeffield, you're fat ass is blocking the video and causing increase back pressure to your exhaust system in turn hampering your cars ability to make power.

[kleensleper]

Nice numbers on some of those cars.

[Iceman-19]

I've seen some diesels make mucho more smoke ahah

Jeffield, you're fat ass is blocking the video and causing increase back pressure to your exhaust system in turn hampering your cars ability to make power.

Mines pretty much stock, and I know how to make it make WAY more smoke.

[hk20000]

Hahahaha the loser Jeffield says the video with him in it (i.e. first video) has "violated his privacy" and made a case with youtube against me. If you asked nicely over PM (like how the EVO video is not public now) is one thing putting a case up without even asking is a new low.

you stand in a public event behind your own car getting into my lens and it becomes a violation of privacy LOL RSers if you want to make some remixes of his fat ass in that video I'll be more than happy to comply with original footage.

This privacy claim ain't never gonna fly so I'm going to keep this video up lol.

[Mugen EvOlutioN]

C63 with a N sign in the back


:haha::haha::haha::haha::haha::haha::haha:

[Iceman-19]

Wow, thats lame.

[Greenstoner]

Hahahaha the loser Jeffield says the video with him in it (i.e. first video) has "violated his privacy" and made a case with youtube against me. If you asked nicely over PM (like how the EVO video is not public now) is one thing putting a case up without even asking is a new low.

you stand in a public event behind your own car getting into my lens and it becomes a violation of privacy LOL RSers if you want to make some remixes of his fat ass in that video I'll be more than happy to comply with original footage.

This privacy claim ain't never gonna fly so I'm going to keep this video up lol.

i dont mind to see some remix

[Iceman-19]

I talked to him about his car, and he was a douchebag about it. Fat little fuck.

[Mugen EvOlutioN]

at least he takes pride in his car that he barely fits into the driver seat with it reclined all the way to the back.

[josel_atr]

It was another successful day. It was nice to see some old faces and meet some new ones. A lot of nice cars making good power.

480awhp R32 GTR
427awhp 2009 GTR
380awhp 2007 Subaru STI
363whp C63 AMG Benz
358whp C63 AMG Benz
340ish wtq from the 335D bmw
black smoke and 490wtq from Iceman's F350 Diesel


those are some crazy numbers.

does anyone know the mod list for the sti?

[jeff_alexander]

I talked to him about his car, and he was a douchebag about it. Fat little fuck.

Fucking little wankers and their C63s.

[TOPEC]

those are some crazy numbers.

does anyone know the mod list for the sti?

all i know is he completely did the engine tear down + rebuild himself, and is running a twinscroll borgwarner turbo. lots of hours spent on the car.
that car is no joke, if u see it on the streets u'll shit ur pants.

[VSBB6]

how did the Evos do?

[mpr]

^
I only saw one evo showed up. nothing compared to yours :P

[Jeffield]

Iceman, when did you talk to me? The only time I talked was asking what was your torque numbers and I left.

[kyousuke]

all i know is he completely did the engine tear down + rebuild himself, and is running a twinscroll borgwarner turbo. lots of hours spent on the car.
that car is no joke, if u see it on the streets u'll shit ur pants.

there's an sti in vancity that has around 500 awhp w/ meth injection.

here's a dyno vid
YouTube- 2007 STI - 511 WHP Dyno

[TOPEC]

there's an sti in vancity that has around 500 awhp w/ meth injection.

here's a dyno vid
YouTube- 2007 STI - 511 WHP Dyno (http://www.youtube.com/watch?v=m3mU3ixNZlA)

i AM talking about HIM

[kyousuke]

i AM talking about HIM

Oh, my bad.

480awhp R32 GTR
427awhp 2009 GTR
380awhp 2007 Subaru STI
363whp C63 AMG Benz
358whp C63 AMG Benz
340ish wtq from the 335D bmw
black smoke and 490wtq from Iceman's F350 Diesel

its 380 now? :O

[GC8]

its the same one...

[kyousuke]

what?! im confused lol.. :confused:

[GC8]

the mustang dyno reads lower

[kyousuke]

the mustang dyno reads lower

oh, right thanks. forgot about it being on a mustang dyno..

but THAT much lower?! my god :eek:

[mpr]

if you read the whole thread, you'll know that the RG mustang dyno reads lower than most dyno out there.

just like the amg c63 all run about 360 whp with tune and bolt on. It should be estimated at 520 hp at the crank and stock is 450 hp at crank.

[kyousuke]

if you read the whole thread, you'll know that the RG mustang dyno reads lower than most dyno out there.

just like the amg c63 all run about 360 whp with tune and bolt on. It should be estimated at 520 hp at the crank and stock is 450 hp at crank.

thanks for clearing it up :)

[mpr]

no problem. press thanks on my post :)

just to be even more clear. a stock c63 run 310 whp on that dyno. You can calculate the ratio from there.

[mike_cool79]

I made 183awhp =( Oh well I'm happy about my numbers if this dyno is under reading. Great bunch of guys at Racing Greed definately going back there again if I need any work done to my car. Wanted to rock some RG stickers but unfortunately they were out of them :( haha

[alcoolaid]

oh, right thanks. forgot about it being on a mustang dyno..

but THAT much lower?! my god :eek:
Car wasn't running properly on the dyno for some reason. Me and tuner think it was just too much load in 4th gear (07+ sti has longer gears and usually all tuned in 3rd) but it should have handled it....

So yeah it ended up spiking to 34psi at 4000rpm when it should peak at 28psi. Then in turn, ecu pulled boost and timing like crazy (16psi) so it wouldn't blow up and then climbed again. By the time it went back up I was already past where I usually make peak power ~6000rpm.

But non the less the RG dyno does read super low. I was expecting like 440-450 with the car running properly.

Did some testing on the street after and all was fine so maybe I'll just head down to where the car was tuned and do a 4th gear pull on that dyno.

[Dtox89]

If there is so much hate for Jeffield and he was at a RS meet why would no one say anything?
All im seeing is a bunch of people coming online and bitching about him why wouldnt you say something in person?
dont know much about it just my 2 cents.

[originalhypa]

If there is so much hate for Jeffield and he was at a RS meet why would no one say anything?

Been there, done that.
no one wants to see a fight at a meet, so a lot of the times those in question will simply bite their tongue. It helps that the lippiest little fucks online, are the quietest in real life.

CN's: it's not worth it to fight over the internet.


PS: Nice numbers on some of these cars.
:thumbsup:

[StealthFighter]

If there is so much hate for Jeffield and he was at a RS meet why would no one say anything?
All im seeing is a bunch of people coming online and bitching about him why wouldnt you say something in person?
dont know much about it just my 2 cents.

the dyno day meet?...wasn't too many people there. you'll probably see more hate if he shows up at spring/summer meet cause there'll be more people there.


what everyone wants is for asnoobasitgets to show up at the RS meet in a carrera with a turbo whistle tip.

[RacingGreed]

Car wasn't running properly on the dyno for some reason. Me and tuner think it was just too much load in 4th gear (07+ sti has longer gears and usually all tuned in 3rd) but it should have handled it....

So yeah it ended up spiking to 34psi at 4000rpm when it should peak at 28psi. Then in turn, ecu pulled boost and timing like crazy (16psi) so it wouldn't blow up and then climbed again. By the time it went back up I was already past where I usually make peak power ~6000rpm.

But non the less the RG dyno does read super low. I was expecting like 440-450 with the car running properly.

Did some testing on the street after and all was fine so maybe I'll just head down to where the car was tuned and do a 4th gear pull on that dyno.

Your car has great potential, even better than our race STI, setup wise.
It should be able to break our Subaru Dyno Record (520whp)with no problem with a proper tune if everything is working right.
We'll be looking forward to seeing that.

PS, Should apply some load on the dyno when you tune, on the other dyno video of your car, the pulls seem too short. Tune will be much better if you use dyno that can vary the load such as Dyno Dynamics, Mustang dyno or tune it in a higher gear.

[hk20000]

If there is so much hate for Jeffield and he was at a RS meet why would no one say anything?
All im seeing is a bunch of people coming online and bitching about him why wouldnt you say something in person?
dont know much about it just my 2 cents.
I don't hate him I don't even know him...

but going to an open publicly advertised event, getting such action taken, and then putting up a case against me on youtube for your "privacy" being intruded is just uncalled for. Wasting my time to go explain things with Youtube so I don't get my account banned and stuff. A simple PM would have been sufficient.

So here is something to get you guys started.

You don't fuck with me for no fucking reason. Same as how it works IRL. Simple as that.

[Vale46Rossi]

Hey Tim,

Although I don't know you well, I see you often at SFU. I would love to join you in laughing at Jeffield for being fat, but seeing this picture of you...

http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v191/57/77/799549189/n799549189_301520_6225.jpg

I have to change my mind, as although there are many hilarious fat guys in the world, 1000 fat guys would not even overcome the hilarity of this picture.


I don't hate him I don't even know him...

but going to an open publicly advertised event, getting such action taken, and then putting up a case against me on youtube for your "privacy" being intruded is just uncalled for. Wasting my time to go explain things with Youtube so I don't get my account banned and stuff. A simple PM would have been sufficient.

So here is something to get you guys started.

You don't fuck with me for no fucking reason. Same as how it works IRL. Simple as that.

[1exotic]

lol computer gamer nerd ^


no offense.

[Jackygor]

Hey Tim,

Although I don't know you well, I see you often at SFU. I would love to join you in laughing at Jeffield for being fat, but seeing this picture of you...

http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v191/57/77/799549189/n799549189_301520_6225.jpg

I have to change my mind, as although there are many hilarious fat guys in the world, 1000 fat guys would not even overcome the hilarity of this picture.

I would LOVE to see a photo of yourself Steven. Are you saying we can only laugh at one's appearance if the person laughing has a better look? You posting a picture of Tim (hk2000) doesn't make you any better than next person calling Jeffield a fatass or Tim a gaming nerd. Oh and to explain why people of RS are not too fond of jeffield, if you don't know already, it can be explained by 2 simple youtube videos.

YouTube- Part 1

YouTube- Part 2

[Mr.Jay]

^that was too funny

[rawr]

jackygor!! that was hilarious :haha:

[impactX]

Anyway... back on topic please. :)

[b-dub]

If there is so much hate for Jeffield and he was at a RS meet why would no one say anything?
All im seeing is a bunch of people coming online and bitching about him why wouldnt you say something in person?
dont know much about it just my 2 cents.

YOU WANNA BET? RIGHT NOW, $1000.

[Dtox89]

YOU WANNA BET? RIGHT NOW, $1000.


lulululululululululululluullululul

[Lowered_Klass]

What started out as a cool thread, has gone right into the shitter.

Mods should start handing out points to those who don't stay on topic.

Save the name calling/hair pulling for fight club. :thumbsup:

[Mugen EvOlutioN]

we just dont like jeffield tats all
;)

[Mugen EvOlutioN]

I would LOVE to see a photo of yourself Steven. Are you saying we can only laugh at one's appearance if the person laughing has a better look? You posting a picture of Tim (hk2000) doesn't make you any better than next person calling Jeffield a fatass or Tim a gaming nerd. Oh and to explain why people of RS are not too fond of jeffield, if you don't know already, it can be explained by 2 simple youtube videos.

YouTube- Part 1 (http://www.youtube.com/watch?v=c-zFm-uOqFE&feature=player_embedded)

YouTube- Part 2 (http://www.youtube.com/watch?v=dUS-amLKHPs&feature=player_embedded)

this shit is pure fucking gold


thx again

[Iceman-19]

Been there, done that.
no one wants to see a fight at a meet, so a lot of the times those in question will simply bite their tongue. It helps that the lippiest little fucks online, are the quietest in real life.

CN's: it's not worth it to fight over the internet.


PS: Nice numbers on some of these cars.
:thumbsup:

Actually there was a fight, I missed it, but I saw some dude after with a bloody face and a ripped shirt.

[Mugen EvOlutioN]

^

when did that happen?

[StealthFighter]

Actually there was a fight, I missed it, but I saw some dude after with a bloody face and a ripped shirt.

a fight at dyno day? did someone hate on someone's vinyl stickers?

[hk20000]

Nice a picture of myself, I'm honored. :thumbsup:

[jing]

Hey Tim,

Although I don't know you well, I see you often at SFU. I would love to join you in laughing at Jeffield for being fat, but seeing this picture of you...

http://photos-e.ak.fbcdn.net/photos-ak-sf2p/v191/57/77/799549189/n799549189_301520_6225.jpg

I have to change my mind, as although there are many hilarious fat guys in the world, 1000 fat guys would not even overcome the hilarity of this picture.
http://www.culinarysherpas.com/wp-content/uploads/2009/10/evilmonkey.jpg

[hk20000]

^ nice :D

And whoever this Steven guy is, my name is not Tim so I must have not even talked to you once... hint: No one ever calls me Tim on a daily basis.

So you found a picture of myself posing for the camera when I was 16, I must give you thanks for finding it coz I can't find it in my HDD no more...

And no I have never made fun of him of being fat before, HE started this whole crap with me on Youtube jeopardizing my account -> People start saying how Jeffield is fat and laugh at that -> I hit where it pleases the crowd -> typical RS style thread is born.

Anyway back to the topic of power figures, how do you measure the HP on a car that is equipped with CVT without a gear selector (e.g. a Versa)? the gear ratio changes throughout the run doesn't it?

[Iceman-19]

As for the fight, I have no idea as I missed it. I just saw some drug dealer lookin dudes roll up on him, but I thought they were friends of his. I didnt think anything of it and I was no where near them when it all happend.

[hk20000]

god damn it Jeffield give it a rest already. I didn't put your name up I didn't put your HP up you look like how you look like so it appears in the camera that you are very FAT. I don't know maybe it's the camera? Youtube already reviewed the video once and it's still live complaining it over and over again is not going to get you anywhere. Dude justs STFU.

PS. the video is the video with him and his car in it, there can't be anyone else who could be filing this.

[roastpuff]

Two GTI dynos... GTI R32 and GTI Mk6 dyno coming up soon.

YouTube- lavmugen dyno
YouTube- 604GTI STG2 Dyno @ Racing Greed.

[hk20000]

^ what's the # on those?:)

[roastpuff]

Black one, 199whp, grey one 177(?!) whp. My stock Mk6 (same engine) reads 150whp.

Stg2 cars for the both of them. Man that Mustang dyno reads low...

More dyno vids

YouTube- GTI Mk6 Stock Dyno

YouTube- GTI R32 dyno

YouTube- Pockystixx GTI Dyno

[Iceman-19]

That bottom video, the guy in the track pants was the guy that got beat up, or punched, or whatever.

[Vale46Rossi]

That bottom video, the guy in the track pants was the guy that got beat up, or punched, or whatever.

why he looks perfectly nice. :)

[TOPEC]

isnt he one of the dyno operators?

[ASG111]

http://i48.tinypic.com/w9il1t.jpg

[roastpuff]

Last two videos, I swear.

YouTube- C63 Dyno @ Racing Greed

This little Honda was quite the car. It has NAAAWSSSSS.

YouTube- Crazy CRX Dyno @ Racing Greed

[Roach]

Kev, what did you put down at Miller Performance last summer? If I got the right guy, I think you were there right before I was. I believe that was a mustang dyno as well.

Hey sorry bud, read this a little late.

At Miller the car put down 230whp and 276lb/ft torque. This is before I got a Cobb AP.

I was surprised that I was the only one there that time. Guess I just missed you. How did you do?

Kev

[Roach]

Roastpuff what did the R32 put down? Such a beautiful car.

Your MKVI is gorgeous too. Congrats. And yes, that dyno is so harsh haha.

Kev

[roastpuff]

Roastpuff what did the R32 put down? Such a beautiful car.

Your MKVI is gorgeous too. Congrats. And yes, that dyno is so harsh haha.

Kev

About 200whp as well, if I remember right. It's stock, so that's about right for the rated crank hp and the AWD loss.

Thanks! I like it even more after autocrossing it this weekend... made it do this. ;)

http://farm3.static.flickr.com/2764/4321119123_b741735284.jpg (http://www.flickr.com/photos/dionditan/4321119123/" title=IMG_1245 by Diondi Tan, on Flickr)

[Roach]

Haha way to go!!! Is that UBC slush series? Looks like a soggy day to working flagperson.

A little OT, but were you going up highway 99 north through the tunnel on saturday night? A black MKVI blew by me.

Kev

[roastpuff]

Haha way to go!!! Is that UBC slush series? Looks like a soggy day to working flagperson.

A little OT, but were you going up highway 99 north through the tunnel on saturday night? A black MKVI blew by me.

Kev

Yeah, UBC Slush #4. Was quite wet... lots of people with high-powered/RWD/super-stiff FWD cars spun out.

Nope, not me. Saturday night I was at home packing for the autocross. :haha: