[wasabisashimi]

Can someone recommand me a muffler shop that does custom exhaust fitments?

I have a Amuse R1 from 350Z that i want to fit onto an infiniti EX35

http://www.370zblog.com/wp-content/uploads/2009/03/z34_rs-silent_gold.jpg

[TheSalesman]

G5 should be able to do that for you.
Give them a call.

[dj.ac]

carline in richmond

[hk20000]

if you just need "fitment" it should be doable by any mechanic shop.

if you need welding then it's a different story.

[wasabisashimi]

i dunno if cut and welding will be required. I think most likely yes cuz the mounting hinges are definitely located at different point on the 350Z chasis.


Can't do this at budget muffler...:p

[AVS_Racing]

hogelers in richmond no. 3 across from lansdown does pretty good work and decent pricing

[Expresso]

If this is full out Titanium, you might want to ask before you head down. There might be a select few shops that have experience with Ti, but you should double check for sure.

[wasabisashimi]

oh shit,, thanks for reminding me that its titanium........ I am goign to call panthers machine shop next week

[GabAlmighty]

Buy a pipe, clamp to downpipe. Grab an angle, exit by rear wheel, profit?

[Qmx323]

hogelers in richmond no. 3 across from lansdown does pretty good work and decent pricing


mmmhmm +1 got a full custom catback made and a muffler welded on for under 200

[punkwax]

I recommand you find a dictionary.

[flagella]

^and I'll re-command you again to do so.

[ilvtofu]

Try muffler man in burnaby? Got a custom 2.5" catback from them for my Z there not bad, Z tune might be familiar with these cars though, but I'm not sure about their work

[Kilinim]

White Rock Muffler. Super nice, cash deals too! Don't know if they do titanium stuff though.

[Leopold Stotch]

Can someone recommand me a muffler shop that does custom exhaust fitments?

I have a Amuse R1 from 350Z that i want to fit onto an infiniti EX35

http://www.370zblog.com/wp-content/uploads/2009/03/z34_rs-silent_gold.jpg

that looks like a midpipe back right?

in that case all you'd need is to relocated the hangers and get an extension fabbed up.

[Captain Bondo]

If it's titanium and requires any modification at all, a "muffler shop" is not going to cut it. You'll need a shop that has a fabricator that is comfortable TIG welding titanium.

[tiger_handheld]

Strong Break And Muffler in Surrey. The Surrey RCMP deals with these guys. I see alot of modded cars there as well.