PDA

View Full Version

: FS: Stern forged 14mm 5x114.3 wheel spacers brand new

tamiya_s2000
03-13-2010, 06:12 PM
Have a pair of brand new forged hubcentric spacers for sale, test fitted but never used
was going to use them for brake clearance issues, but turns out i do not need them.
so they are up for sale

comes with 10x 50mm extended studs as well

http://i9.photobucket.com/albums/a55/tamiya_S2000/2d04ede3.jpg

here's a front/back view of the spacers
http://i9.photobucket.com/albums/a55/tamiya_S2000/9c862e5e.jpg

will do $90 picked up
RZZ
03-13-2010, 07:27 PM
what's the center bore diameter?
fit honda?
boostfever
03-13-2010, 08:02 PM
these are good quality! :thumbsup:
tamiya_s2000
03-15-2010, 01:31 PM
center bore is 66.2mm
i think they fit hondas
tamiya_s2000
03-16-2010, 12:06 AM
bump
tamiya_s2000
03-17-2010, 11:41 AM
OBO!
tamiya_s2000
03-18-2010, 02:45 PM
BUMP BUY ME
tamiya_s2000
03-21-2010, 12:44 PM
o herro
typ.
03-21-2010, 04:00 PM
every cars a little different, but these will fit the rears of hondas i believe. not the front.

free bump for you! :) spacers with extended studs are necessary!
tamiya_s2000
03-28-2010, 12:35 AM
thanks for the info bro
yea some1 pick these up!!
tamiya_s2000
03-30-2010, 03:48 PM
bump
tamiya_s2000
04-01-2010, 01:02 PM
ttttt
Jgresch
04-02-2010, 03:05 PM
Any idea what the Centre bore is? PM me please.

edit: nvm didn't see it before.
tamiya_s2000
04-03-2010, 01:32 PM
yesh 66.2mm bro
tamiya_s2000
04-06-2010, 03:05 PM
bump
tamiya_s2000
04-10-2010, 11:50 AM
OBO
tamiya_s2000
04-12-2010, 05:13 PM
bump
tamiya_s2000
04-20-2010, 03:53 PM
price dropped!
Mugen EvOlutioN
04-20-2010, 09:07 PM
will this fit on a 05 TL?


if so my buddy might be interested
tamiya_s2000
04-20-2010, 10:09 PM
i believe it'll fit on to your friend's car
but as some1 said before, the centre bore fits rear of hondas, but unsure about the fronts
might wana look that up
Mugen EvOlutioN
04-21-2010, 07:43 AM
cool i will let him know


what car was it originally on
Mugen EvOlutioN
04-21-2010, 09:13 AM
my buddy actually needs it for his rear

not the front



hmmm i think the center bore for acura is 64mm slightly smaller
!Aznboi128
04-21-2010, 09:13 AM
accords/ TL's are 64.1

all newer 5bolt honda's are 64.1
4bolts are 56.1 other then accords

so these will not be hub centric for honda's
Mugen EvOlutioN
04-21-2010, 09:21 AM
same as dc5 than



so if this is 66mm, than i guess it WILL NOT FIT than?
!Aznboi128
04-21-2010, 09:32 AM
These are made for Nissan, 240, 300, 350 sentra etc (5bolt)
Mugen EvOlutioN
04-21-2010, 01:11 PM
no good for hondas thaan