[RabidRat]

A fit!

http://img.photobucket.com/albums/v406/jpax/FIT/IMG_1775.jpg

http://img.photobucket.com/albums/v406/jpax/IMG_1859.jpg

http://img.photobucket.com/albums/v406/jpax/IMG_1815.jpg

Info
K20z3 Engine and 6spd Transmission
RSX shift linkage
stage 2 axles
Jackson Racing custom swap header
Jackson Racing Fit exhaust
Jackson Racing supercharger
Hondata Kpro
Hasport mounts, and adaptor harness
06 Si shift knob
06 Si pedals
Advan RG2 with Falken Azenis tires RT-615
Fast brakes.com rear disc convertion
Fast brakes.com front brake upgrade
Progress Auto street coilovers in front and street shock and springs in back
Progress Auto rear sway bar

For the sticker nazis, he says he runs without them daily; he only put them on for the event he was at.

http://www.youtube.com/watch?v=sAiuBSeUrqs

Note speedo is in mph.

:lol apparently this was supposed to go in his EK hatch, but he changed his mind becoming so frustrated by how slow his Fit was.

[barcode]

do we have a local k20 swapd fit?

[shenmecar]

I rather the video didnt have the background music. Then I could hear the engine sound better. X.x

[RabidRat]

^ I think he's got another video up on youtube w/o the music, at least that's what it says lol.

Anyone know how much a K20 will make with a JRSC strapped to it?

[FerrariEnzo]

wow.. thats an insanely fast fit... the speedo was just blazing up...

[BD2002]

Mother fucking badass

[PDKGD3]

Build thread.

http://www.fitfreak.net/forums/fit-photos-videos/25990-joes-picture-thread-k-powered-fit.html

[VK79]

^ I think he's got another video up on youtube w/o the music, at least that's what it says lol.

Anyone know how much a K20 will make with a JRSC strapped to it?

Know a guy a couple of years back who did a JRSC on his RSX, got close to 240whp with only a CIA+Cat back.

[jtanner_]

Sick car and build thread... guy also has other incredible previous builds...

[Mugen EvOlutioN]

now tats how u do it

[GabAlmighty]

But, but, but he's still got torque steer!

[Klutch]

thats gangsterrr

[Chopstick]

apparently this was supposed to go in his EK hatch, but he changed his mind becoming so frustrated by how slow his Fit was.

funny, sad and true at the same time (Q__Q).....

[XtC-604]

So, any Civics wanna take up the challenge?

[c4@urdoor]

So, any Civics wanna take up the challenge?

Sure?
http://www.youtube.com/watch?v=hPJAZS_zq7I&NR=1

Dumbass.

[Benz_05TSX]

I thought the K20Z3 is the RDX engine?? It can be manual?

[GabAlmighty]

I thought the K20Z3 is the RDX engine?? It can be manual?

Any motor can be paired with a manual transmission....

[umpadupa]

isnt the K20Z3 (RDX) factory turbo'd?

[speedking]

I thought the K20Z3 is the RDX engine?? It can be manual?

k20z3 is SI engine

[TRD Rs200]

and there is even room for the sc

[Shun Izaki]

Know a guy a couple of years back who did a JRSC on his RSX, got close to 240whp with only a CIA+Cat back.

no way, the JRSC is capable of 300+ easily...
wheter your want to or not... is another question... the kw kit can mak 550whp if you're brave enuf to lose ps + a/c. I'd never cut those kinda systems out, not knowing shit about how they are wired up doesn't help.

[hotong]

It depends what psi pulley you use, with 11psi you can get 300 or close to 300 depending on what mods you have.

[Shun Izaki]

It depends what psi pulley you use, with 11psi you can get 300 or close to 300 depending on what mods you have.

the JRSC new ships with the 7psi pulley i think... but most people have 9 or 11

[vietfx]

Isn't that Jpax, the owner of ephatch, fgcoupe, and fitswap? He used to have a K24 SC'd EP3, that Fit, and some EK that was supposed to have the RDX motor (but never went through with it)

http://www.youtube.com/watch?v=3epSMR6BPAM
Here is his old K24A2 JRSC EP3