PDA

View Full Version

: Quick, where to find weird fuse?


TOPEC
10-08-2010, 06:04 PM
anyone know where i can find this specific kind of fuse locally?
here's what it looks like

http://img97.imageshack.us/img97/5192/img00041201010081900.jpg
http://img837.imageshack.us/img837/544/img00042201010081901.jpg

the markings on the fuse body are:
SEFUSE
SF119E-1
121 *C
10A
JET250V-

it came from a brand new electric cooker that isnt working which i suspect to be this fuse causing problems.

thanks in advance.

dmm
10-08-2010, 06:10 PM
It's a thermal fuse, and if the temp goes over 121 degrees, it opens. You should check with a multimeter or some kinda continuity meter first, it should be closed at room temp, otherwise that's not your problem.

If you need a replacedment, you can try one of those electronic stores:
RP electronics www.rpelectronics.com (near Willingdon + Lougheed)
Active www.active123.com (1st + Boundary)
MRO www.mroelectronics.com (1st + Boundary)
Interior Electronics www.interiorelectronics.com (near 1st + Boundary)
Main www.mainelectronics.com (Main St - Vancouver)
Lee's www.leeselectronic.com (Main St - Vancouver)

Razor Ramon HG
10-08-2010, 06:12 PM
By electric cooker, do you mean rice cooker?

:troll:

MG1
10-08-2010, 06:37 PM
Do All Service Ltd
2138 Kingsway
Vancouver , BC V5N 2T5
604-874-9515

TOPEC
10-08-2010, 06:39 PM
By electric cooker, do you mean rice cooker?

:troll:

close, its actually called a slow cooker, used for stewing, steaming, etc etc.

TOPEC
10-08-2010, 07:12 PM
ok i hope this makes sense

http://img233.imageshack.us/img233/6664/img00045201010082000.jpg

i used a test light for the following:

N to +1 = light up
N to +2 = no light
N to +3 = no light

then what i did was take the wire that goes from +2 to +3 and hook it up to +1 to +3 bypassing the fuse, the unit turns on.

so am i right about the fuse causing the problem?

sleepywheel
10-08-2010, 08:19 PM
What a coincidence! I just had to buy one of those for our rice cooker.

Queale Electronics / Interior Electronics on Boundary have some in stock but you'll have to check with them on the specs to see if they have it. They didn't have the temp that I wanted to I went over to MRO near 1st and Boundary and they had it in stock. If neither have it, then try Active Electronics.

Culverin
10-08-2010, 09:46 PM
Are you guys experimenting on your parent's slow/rice cookers?

Why????


Also, the "quick, where to find weird fuse", is the "quick" because you broke it and you need to fix it our you don't get rice for dinner? :rofl:

TOPEC
10-08-2010, 11:34 PM
Are you guys experimenting on your parent's slow/rice cookers?

Why????


Also, the "quick, where to find weird fuse", is the "quick" because you broke it and you need to fix it our you don't get rice for dinner? :rofl:

um no i did not touch it, i came home to my mom complaining its not working, so i had to take it apart and try to fix it asap to avoid her annoying me.
thus the sound of urgency in the title, but i realized by the time it was posted, it's already 7ish on a friday night, and probably most shops are closed or too far.

DasHooch
10-09-2010, 02:29 AM
So you don't have a multimeter. Your test does the job.

Yeah, if +1 and +2 don't act the same, it sounds like that fuse is the culprit. I'm assuming you didn't test everything above 121 degrees.

So off you go to buy a $3 fuse. Do you have the pliers/crimpers/whathaveyou to connect the replacement fuse to those convenient existing wires? If not, maybe bring them along and ask them to help you out.

TOPEC
10-09-2010, 10:36 AM
So you don't have a multimeter. Your test does the job.

Yeah, if +1 and +2 don't act the same, it sounds like that fuse is the culprit. I'm assuming you didn't test everything above 121 degrees.

So off you go to buy a $3 fuse. Do you have the pliers/crimpers/whathaveyou to connect the replacement fuse to those convenient existing wires? If not, maybe bring them along and ask them to help you out.

i do have a multimeter but along with pliers and crimpers etc all my tools are packed up and i dont know where it is cause of moving, thus making this fix harder than it needs to be lol.