PDA

View Full Version

: TW: JL Audio 360W 2 Channel Amp BNIB


quan
05-22-2011, 03:43 PM
Just testing the waters here. Bought this a few months ago, but thinking of going a different route with my sound system. Selling a JL audio 360W 2 channel amplifier. Only opened the plastic/package to look at everything, otherwise it's brand new and never installed. Still have everything that came with the box.

Asking for $170 obo

Model J2 360.2
http://i779.photobucket.com/albums/yy72/darylquan/IMG_0888.jpg

General Specifications:
Recommended Fuse Value: 40A
Recommended Fuse Type: AFS, AGU or MaxiFuse™ at
battery, 2 x 20A ATC fuses on amplifier chassis

Input Sections:
No. of Inputs: One Stereo Pair
Low-Level Inputs: Single-ended with RCA jack inputs
Low-Level Input Range: 200mV - 4V RMS
High-Level Inputs: Single-ended with molded connector
High-Level Input Range: 2V - 10V RMS

Amplifier Section:
Amplifier Topology: Class A/B with Dual N-Channel
MOSFET output stage
Power Supply: PWM switching type, unregulated

Rated Power with less than 1% THD (14.4V supply):
Stereo, all channels driven:
110W RMS x 2 @ 4 ohms
135W RMS x 2 @ 3 ohms
180W RMS x 2 @ 2 ohms
Bridged, all channels driven:
220W RMS x 1 @ 8 ohms
270W RMS x 1 @ 6 ohms
360W RMS x 1 @ 4 ohms

Frequency Response: 10 Hz - 35 kHz +/- 0.5 dB

Crossover Sections:
Filter Type: 12dB/octave High-Pass or Low-Pass with
continuously variable cutoff frequency selection from
50 - 500 Hz. Defeatable.

Preamp Output:
2-Channel, pass-through with unity gain, RCA-type jacks.

Dimensions (LxWxH):
12.80" x 9.60" x 2.15" (325 mm x 244 mm x 55 mm)

bloodline129
05-22-2011, 10:06 PM
More specs / model number n such?
Posted via RS Mobile (http://www.revscene.net/forums/announcement.php?a=228)

quan
05-23-2011, 09:05 AM
specs up, picture up later on

quan
05-26-2011, 04:35 AM
picture up

quan
05-30-2011, 04:43 AM
bump

quan
06-03-2011, 04:27 AM
bump

quan
06-12-2011, 07:32 AM
bump

quan
06-21-2011, 04:48 AM
bump

quan
06-29-2011, 04:45 AM
bumpp