[Calc36]

Hi guys,
Any recommandation for custom welding exhaust shop ??
planning to do cat back

[Ichi]

Muffler Man on Kingsway.

[MindBomber]

Evolution, but not sure if they do jobs that small.
Posted via RS Mobile (http://www.revscene.net/forums/announcement.php?a=228)

[DiiCii]

sorry if threadjacking, but i'm also looking for an exhaust shop. i'm looking to delete my resinator but instead of just chopping it off and welding in a pipe, i want to get a custom bolt on pipe made. incase i want to sell my catback later on. my brother has recommended butch's in surrey. i know it's hard to come by, but anyone know any shops that do quality work and at a cheap price at the same time? :p low on budget, decent work will do :okay:

[Riddle]

Muffler Man on Kingsway.

2nd this.

[kroy546]

or...Hoelger on number 3 and lansdown in richmond

[Cman333]

We definitely can tackle the job.

We've redone alot of Hoegler's work. They butchered my friends CLK55 muffler. Tips were not level, one was shorter than the other.

[Jegz]

muffler man is good. hoeglers charge more than muffler man

[CP.AR]

Just went to Hoeglers in Richmond to do a mid-muffler and resonator delete

He left it jacked up so I can inspect his welding work.
I told him that I might revert in the future so he made his cuts supernice and sanded a bit of the rough edges for easier handling.

[rageguy]

I had great experience with Hoegler's. I had them weld a few pipes before, multiple times. Great service but not cheap at all.

[bcrdukes]

We definitely can tackle the job.

We've redone alot of Hoegler's work. They butchered my friends CLK55 muffler. Tips were not level, one was shorter than the other.

Just went to Hoeglers in Richmond to do a mid-muffler and resonator delete

He left it jacked up so I can inspect his welding work.
I told him that I might revert in the future so he made his cuts supernice and sanded a bit of the rough edges for easier handling.

Captain Picard - :rofl:

[ilvtofu]

Muffler man did both of my cars

Z31 bent a nice 2.5" catback for me and welded on aftermarket muffler

Astra, removed old muffler and welded new one on.

No complaints for either job, alignment was nice too and guy who installed it asked how I wanted it to sit before he did anything.


$160 for the Z31 catback (reasonable?) and $80 for the astra muffler only (a little pricey?).

Honestly though I'd have bought a cheap catback off ebay if one was available and do the install myself to save money.

[Kilinim]

White Rock Muffler. Good work, cash prices.
Posted via RS Mobile (http://www.revscene.net/forums/announcement.php?a=228)

[originalhypa]

Van Neer Developments.
Shawn is back and fabricating like a madman. He is the only guy other than myself, Jason at Dale's and Pat at Rocket who will ever work on my cars.

[k3lv]

The Speed Syndicate can also custom weld for you. I'm in the process of getting my 3 inch catback done by them as we speak. TSS are a bunch of good people.

[vdub604]

i got mine does at butch's in surrey. They're recommended by PG that deals w/ euros ..

[crazyazn]

Speed shops will probably cost more than an actual muffler shop like Muffler Man/Hoegler's.

The black dude at Hoegler's seems like a nice guy, don't bother talking to the white guy lol

[rageguy]

The black dude at Hoegler's seems like a nice guy, don't bother talking to the white guy lol

+100000000.

The black guy is super awesome. He'll give you the best cash price. The white guy will severely rip you off.

[Gh0stRider]

i need to extend my axleback. any new places to check out or places to avoid?

[Bender Unit]

i need to extend my axleback. any new places to check out or places to avoid?
Newest Thread related welding you should read (http://www.revscene.net/forums/672481-looking-take-your-resonator-out.html)

[Mkhun]

Kingsway Brake and Muffler.

i've got my custom 3" single cat-back set up done there, TOP NOTCH JOB.

Can't complain a thing !

[AVS_Racing]

I would recommend muffler man on kingsway too, went a few times for exhaust work, fast and reasonable prices, better than hoglers from my experience

[!Nhan]

Go to curtis at TSS.

/endthread

[XplicitLuder]

i went to muffler man on kingsway too, was satisfied! if you want higher end shops id hit up the speed syndicate!

[nabs]

^^
what is their shop rate? I need to get some adjustments done, i went to mufflerman however its really far for my liking. and i dont like driving on kingsway.

[Gh0stRider]

MM quoted me $70 to weld on a section.

[lowda9]

Can muffler man fabricate custom downpipes?

[lowda9]

Kingsway Brake and Muffler.

i've got my custom 3" single cat-back set up done there, TOP NOTCH JOB.

Can't complain a thing !

How much did that cost you? They seem decent and much more conveniently located than muffler man or quiet muffler and brake which are way out of the way for those of us that are in Vancouver.

[Gh0stRider]

got a 1.5" section welded in and re hanged the muffler. $50 plus tax

not sure if chopping the exhaust and adding the section will hinder any performance, but oh well.

[Engotski]

^^
what is their shop rate? I need to get some adjustments done, i went to mufflerman however its really far for my liking. and i dont like driving on kingsway.

Muffler man and speed syndicate are 5mins from each other

[AW607]

Quiet Muffler and Brake on Kingsway. Their work is quick but quality welding. Also if you pay by cash only, they don't charge tax :thumbsup:

[Fafine]

thanks mkhun,

got a custom 3" from the downpipe all the way to the muffler welded, bend, and installed
very happy with it kingsway brake and muffler does great work!

[TjAlmeida]

Evolution performance in maple ridge do top notch work, Kevin is an amazing fabricator. If you want expamples PM me and ill get you pictures of the full exhaust they made for me.

[EmSir]

any one know any places that does mandrel bend piping instead of crush bend? Muffler man? Quiet muffler? any of those do mandrel?

[spyker]

The only place that I know of that has a mandrel bender for pipes is MufflerTech,but I highly recommend you not go there.

[eclipseman]

Bringing this up from the dead. Is Muffler man still the place to go for quick, but good welding? Looking delete a resonator and install an X-pipe.

[Kaolinite]

Versep got his resonator taken out and installed a Ypipe at Muffler man and the welds were pretty bad.. but it is still holding up lol

[snowball]

Versep got his resonator taken out and installed a Ypipe at Muffler man and the welds were pretty bad.. but it is still holding up lol

yeah their welds look like shit, but they'll give you a two year warranty on it lol...

[RX8CER]

Speed syndicate hands down, curtis does awesome work!
Posted via RS Mobile

[ATL]

Shawn at racing greed did some amazing work on my car. He fixed the problems that quiet muffler and brake on kingsway caused too haha