[kj604]

I just purchased an commercial grade electric power washer. It runs on single phase electricity and have 2 different voltage configurations it can run on. 230V @ 22.5 amps, or 208V @ 23.5 amps I was told. The electric panel is in my garage so I wouldn't need to wire it too far, approx. 10ft.

I'm looking for a certified electrician that does tidy work at a reasonable price. Any advise on how this should be done will be greatly appriciated!!

Thanks in advanced.

[Great68]

DIY, It's only 2 wires and a ground.

10' of 10 guage NMD90, 240V receptacle & 4-11/16 box , 30A 2P breaker. Done.

[JesseBlue]

pretty simple for some but for safety i would not recommend a DIY unless you know about these types of power wiring... one wrong move/touch could kill someone so not a good idea to DIY...

i know about these types of power but even that scares me...btw...208 for 3 phase systems and 230/240 for dual/split phase...whatever you want to call it...house will most certainly be the dual/split phase...if you're already confused just look for someone in the yellow pages...

[trip]

contact 604nguyen. hes certified. i used to work with him. good guy

[kj604]

Thanks alot guys!! Appriciate it!!