Brand new Sherwood RM19 hockey stick. Never used or taped nor cut. This model is discontinued and was from about 2 or 3 years ago. Correct me if i'm wrong but i think the RM19 was essentially a pro stock, while the RM9 was the retail version. It's 63 inches from top to heel. Unless you're 6'9 you shouldn't need a wood extension. It's right handed and 75 flex.
I bought 3 of these a few months ago and 1 about a year ago, but don't need so many. I bought it for the shaft only cause i shoot left and was planning on cutting off the blade. I really like the shafts. The walls are flat and even a little convex and the corners are somewhat rounded. As opposed the all the newer sticks with the concave walls which i'm not a fan of. (reason why i bought so many). Similar materials used in construction as other high end sticks.
This is the red stick.
This is the red stick. The blue version is slightly thinner. Blue Shaft is 19mm x 29mm. Red Shaft is 20mm x 30mm
Curved is unmarked. I measured it as 1/2 curve, mid or mid/heel (you decide from the pics), closed face and round toe. Lie is Easton 5.5, Bauer 6, or Warrior 5. Overall to me looks like an Iginla curve.
And yes i know some Sportchek's still have them for sale for 59.99 plus tax, but the only flexes they got left are 95 and 105
$60
Was one of the last few sticks that were still made in Canada
See below for details.
Sherwood RM 19 Stick
Features:
SWD RM19 SHAFT
High modulus carbon fiber for the ultimate strength-to-weight ratio
Special 100% Aramid weave on top layer ensures long-lasting durability, optimum abrasion and impact resistance.
Profiled bottom zone for maximum energy transfer.
Comes in 2 Shaft Dimensions:
Regular - White/Red - 0.785" x 1.180"
Thin - White/Blue - 0.745" x 1.140"
SWD RM19 BLADE
Core of the anti-vibration SWD RM19 made of filament fiberglass and polyurethane foam, covered with 45-degree tri-axial woven carbon fibers, to maximize its mechanical properties while keeping the wight to a minumum.
Addition of two unidirectional carbon fibers, to optimize flex rigidity and durability.
Outside surface made of 45-degree tri-axial woven carbon fibers, to increase torsion rigidity
Lengths:
Sr - 63" Length
Flexes Available:
Sr - 75 Flex, 85 Flex, 95 Flex, 105 Flex
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
