PDA

View Full Version

: Kitchen Remodelling


bcedhk
04-07-2012, 07:21 PM
Anyone have a good recommendation/connection to kitchen planner/remodelling companies that can do work in New West?

Our kitchen needs a complete change (new cabinets/flooring/lighting). We already have a contractor that is doing the flooring, but we need someone to design and pick our cabinet and countertop.

s300ae
04-07-2012, 08:02 PM
Any big retailer can design it for you (home depot, ikea, etc)
There are a bunch of smaller places in north burnaby that do the same thing.
All you have to do is basically google search and pick a brand.

catalin
04-07-2012, 10:08 PM
Europe-rite cabinets in Coquitlam is a good place for cabinets.

tiger_handheld
04-08-2012, 08:13 AM
Home (http://sjayhome.com/home/)

Kitchen remodeling solutions Sjay home - YouTube

Jay does the work himself.

lowside67
04-08-2012, 08:26 AM
Home (http://sjayhome.com/home/)

Kitchen remodeling solutions Sjay home - YouTube (http://www.youtube.com/watch?v=kpUsBq5QcKQ)

Jay does the work himself.

Not sure if srs...

http://sjayhome.com/home/images/beforea/deck_post_restoration.jpg

Pretty sweet work though. :heckno:

Mark

tiger_handheld
04-08-2012, 08:45 AM
^ not sure if you are being sarcastic =\ .

quasi
04-08-2012, 02:14 PM
What are you looking for? Custom made cabinets or something like Home Depot would order for you? My mom did her kitchen probably 2 years ago, she had everything made it turned out really nice. It wasn't cheap but if this is the quality of work you're looking for I can find out who she used. This is a terrible picture, it has to be seen in person to see the detail. Like anything you can spend as much or as little as you want.

http://i50.photobucket.com/albums/f336/quasione/kitchen.jpg

bcedhk
04-08-2012, 05:00 PM
Quasi, thats the look we are kinda looking for. The cabinets in our kitchen are getting worn and so are the sink/fridge etc....

We hope to get someone that can do all the planning/work with our contractor. (he speaks mandarin so he prefers someone that can speak it too).

MindBomber
04-08-2012, 07:06 PM
Home (http://sjayhome.com/home/)

Kitchen remodeling solutions Sjay home - YouTube (http://www.youtube.com/watch?v=kpUsBq5QcKQ)

Jay does the work himself.

An example of the type of contractor I would encourage people to steer clear of.


Any big retailer can design it for you (home depot, ikea, etc)
There are a bunch of smaller places in north burnaby that do the same thing.
All you have to do is basically google search and pick a brand.

Home Depot, Ikea cabinets and the like are alright if you're doing a budget reno, like a basement suite or in a lower value property. If it's a home in a nice area, it's just dated, I would not suggest someone use that grade of cabinet.

tiger_handheld
04-08-2012, 07:17 PM
An example of the type of contractor I would encourage people to steer clear of.




Home Depot, Ikea cabinets and the like are alright if you're doing a budget reno, like a basement suite or in a lower value property. If it's a home in a nice area, it's just dated, I would not suggest someone use that grade of cabinet.

Why do you say that? Feel free to PM me.

MindBomber
04-08-2012, 07:29 PM
By the looks of the work, he seems like a good well rounded trades person, but a contractor who does their own electrical and plumbing is a liability to a homeowner, imho. Anything more significant than very basic electrical and plumbing should be done by a contractor licensed in that specific trade however, it took those trades five years to learn their trade for a reason. On the back of the hoody he's wearing it clearly says, electrical and plumbing, you also say, he does everything himself.

murd0c
04-08-2012, 07:34 PM
make sure you get a lazy susan for one of your cupboards, I have one and could not live with ouyt it

G-spec
04-08-2012, 07:45 PM
do you live in a big house, is it a smaller space ?
you prefer a simplified ikea kitchen or something full blown and custom made ?

Here's an example of my dad's work, basically he did everything from scratch, all in one contractor type... as you can see these are Ikea kitchens, and they can look pretty damn good when put together nicely, so I just wanted to show you that a kitchen can look nice and doesn't have to be fully custom made

before and afters, this used to be garage that we completely renovated into living quarters

http://i190.photobucket.com/albums/z75/Adon604/Krups/JohnTurnerProject2010036.jpg
http://i190.photobucket.com/albums/z75/Adon604/Krups/P1010215.jpg



and here's an example of a much smaller apartment size setup we did in New West actually

http://i190.photobucket.com/albums/z75/Adon604/Krups/DSC04095.jpg
http://i190.photobucket.com/albums/z75/Adon604/Krups/DSC04094.jpg

GLOW
04-08-2012, 08:27 PM
a contractor who does their own electrical and plumbing is a liability to a homeowner, imho. Anything more significant than very basic electrical and plumbing should be done by a contractor licensed in that specific trade however, it took those trades five years to learn their trade for a reason.

ideally i agree with what you say. the problem is that the general home owner does not really care of the quality of workmanship in plumbing & electrical IMO. as long as the water runs and the switch turns the light on & off they are happy. though poor workmanship in either area can cause a lot of damage/problems. i know from personal experience that something as simple as a poor electrical splice can cause a REALLY big headache down the road.

blkgsr
04-08-2012, 08:41 PM
Europe-rite cabinets in Coquitlam is a good place for cabinets.

it's Euro-rite

i got my bathroom vanity and another piece there, decent stuff

CRS
04-09-2012, 08:18 AM
quasi:

That looks ridiculously good. My kitchen has the same basic plan. Would love to know who your mom used and how much it cost. I assume she had everything redone including hardwood floors? Any more picture?!

G-spec:

Nicely designed! How much did it cost for all the work? Possible to break it down? I'm thinking of digging out my basement/garage and would be looking for very similar work.

s300ae
04-09-2012, 12:57 PM
An example of the type of contractor I would encourage people to steer clear of.




Home Depot, Ikea cabinets and the like are alright if you're doing a budget reno, like a basement suite or in a lower value property. If it's a home in a nice area, it's just dated, I would not suggest someone use that grade of cabinet.

I worked at home depot in the kitchen department.
When we designed kitchens for customers, they had a choice between 5-9 different brands which had 10-30 different styles.
I've done 10k kitchens and 60k kitchens.
Home Depot does carry real solid wood kitchen cabinets which cost $$$$.
So I wouldn't go as far as calling it a budget build.

MindBomber
04-09-2012, 01:04 PM
I worked at home depot in the kitchen department.
When we designed kitchens for customers, they had a choice between 5-9 different brands which had 10-30 different styles.
I've done 10k kitchens and 60k kitchens.
Home Depot does carry real solid wood kitchen cabinets which cost $$$$.
So I wouldn't go as far as calling it a budget build.

I would, I worked there too.

Even the solid wood cabinets that Home Depot offers really aren't great quality in comparison to ones made by a good local custom shop.

G-spec
04-09-2012, 07:29 PM
From years of experience, if I or my dad's guys had to choose a custom built from Home Depot or a pre built setup from Ikea, Ikea wins every time...
He was using HD kitchens before until Ikea really stepped their game up with their new designs and materials over 5 years ago roughly.



G-spec:

Nicely designed! How much did it cost for all the work? Possible to break it down? I'm thinking of digging out my basement/garage and would be looking for very similar work.


Ah sorry both these projects were few years ago, dont really remember enough to break it down, but the smaller kitchen project there i vaguely remember it being between 5 and 7 g's, there was more work involved though not just the kitchen itself... but that garage kitchen I'm not sure what the kitchen portion alone was worth since we redid the whole thing it was a big ass project

before n after, it was stripped down to it's bare bones and reinforced

http://i190.photobucket.com/albums/z75/Adon604/Krups/JohnTurnerProject2010018.jpg
http://i190.photobucket.com/albums/z75/Adon604/Krups/IMG_0236.jpg
http://i190.photobucket.com/albums/z75/Adon604/Krups/JohnTurnerProject2010044.jpg
http://i190.photobucket.com/albums/z75/Adon604/Krups/Oldgaragetonewsuitephoto16.jpg

CRS
04-11-2012, 02:27 PM
G-Spec,

I would love to see more of what you and your dad have done. Is your dad a GC?

G-spec
04-16-2012, 02:53 PM
^ you got PM

GLOW
04-16-2012, 02:57 PM
that garage kitchen looks pretty cool.

G-spec
04-16-2012, 03:08 PM
^ yea Ikea has this kitchen software program that's really neat, some of the kitchens he does are full custom, but he loves doing Ikea kitchens because of the simplicity and customers love it cuz it looks expensive but the save quite a bit of money too

GLOW
04-18-2012, 10:27 AM
ya a coworker used that program and laid out his own kitchen he said it was pretty cool.