[crxxxboy]

hi

i have a 99 integra and have H & R springs already but dont know where to bring it to get it lowered?? if anybody is able to do it please let me know thanks

[FerrariEnzo]

Failed you coz there is a SPONSOR section that has MANY locations that can do this...

[bcrdukes]

Refer to my signature.

[XplicitLuder]

g5 , speed syndicate , aria to name a few. Use the search button next time. or do what enzo said

[Grim]

grow a nut sack and do it yourself...

[gars]

You'll need a spring compressor to mount the springs onto the shocks, no?

Other than that, it's not hard to do.

[FN-2199]

Pics of car so I can judge you first, and only then will I tell you where to go :troll:

[MindBomber]

11 years on Revscene and doesn't know of a shop capable of installing springs.

If you're lowering on stock shocks, you might as well go full ghetto and just cut the springs.

[Spectre_Cdn]

You'll need a spring compressor to mount the springs onto the shocks, no?

Other than that, it's not hard to do.

The hard part is taking out the bolts between the LCA's/shocks/trailing arm when they are likely seized.

To the OP, I would recommend G5 based on personal experience. Apparently MDA Fab does good work too.

[k3lv]

The Speed Syndicate is a great shop. Alex and Curtis and Kevin take care of their customers well

[boatcaptain]

you can go to canadian tire and get it installed

[GG]

i expected more from a member that signed up since 2001




such a simple question.......search much?

[MK-EK]

http://s3.amazonaws.com/kym-assets/photos/images/newsfeed/000/001/122/xzibit-happy.jpg

pimp my ride :alone:

[smoothie.]

you've all been trolled.

[The_AK]

http://img.photobucket.com/albums/v440/The_AK/negged.gif

[bloodmack]

torch + oxygen + Acetylene :smug:

[SpuGen]

http://www.endmillwebsite.com/wp-content/uploads/2011/03/angle-grinder.jpg

Shorter spring + Heat from cutting = higher spring rate, and lower car. Also, free.

You're welcome.