The John Norwich Riders Corner In honour of our fellow moderator: John Norwich R.I.P. September 17th, 2014
Buy, sell, trade bikes and gear, set up bike rallies, meet discussions. #revscenebikes |
 | 
08-21-2012, 09:53 PM
|
#1 | | Where's my RS Christmas Lobster?!
Join Date: Feb 2012 Location: Richmond
Posts: 1,116
Thanked 903 Times in 285 Posts
Failed 182 Times in 32 Posts
| lol... ddm LED...
Lol.... the DDM LED for my F1 lights cap thing popped off and now its stuck in my headlight  Bad luck brian for me
My initial thought was to take off the whole fucking thing and take it out like that... but i was hoping some people on revscene have some insight on a much easier way to do it LOL I dont wanna take out the whole thing just to get that stupid thing out, but worse comes to worse i suppose i will have to.  
Thx ahead of time T_T
Submitted a ticket to DDM to maybe get a free replacment, also asked for them to get a shop to take it out for me LOL just trying my luck
| 
|  | |
08-21-2012, 10:46 PM
|
#2 | | Why'd you do that for?
Join Date: Sep 2007 Location: Vancouver
Posts: 1,399
Thanked 302 Times in 137 Posts
Failed 30 Times in 19 Posts
|
take your fairing off, then headlight housing, then you can shake it vertically till it drops...
if you check my fb, i had to do the same thing cause a bulb fell in my housing...hahaha  | |
| | |
08-22-2012, 08:43 AM
|
#3 | | Diagonally parked in a parallel universe
Join Date: Jul 2012 Location: Burnaby
Posts: 1,415
Thanked 569 Times in 301 Posts
Failed 25 Times in 14 Posts
|
Other than doing a wheelie to shake it out back down, you'll have to remove the housing to get it out. If there's any sort of opening where the light bulb goes in, try using an extension with a magnet to grab it throught the hole. If it's plastic try some rolled up tape on the end of an extension.
| |
| | |
08-22-2012, 09:15 AM
|
#4 | | Where's my RS Christmas Lobster?!
Join Date: Feb 2012 Location: Richmond
Posts: 1,116
Thanked 903 Times in 285 Posts
Failed 182 Times in 32 Posts
| Quote:
Originally Posted by 604STIG  Other than doing a wheelie to shake it out back down, you'll have to remove the housing to get it out. If there's any sort of opening where the light bulb goes in, try using an extension with a magnet to grab it throught the hole. If it's plastic try some rolled up tape on the end of an extension. |  Brilliant! gonna try that right now cause gsxr 
sigh prolly gonna remove headlights later today see how difficult it is. Anyone know where to get cheap bright 194 LED bulbs? My initial thought was super garage but they only sell in pairs and its like 15 bones for them
| |
| | |
08-22-2012, 09:42 AM
|
#5 | | My homepage has been set to RS
Join Date: Nov 2002 Location: Burnaby
Posts: 2,044
Thanked 60 Times in 13 Posts
Failed 2 Times in 1 Post
|
Use a long bendy straw and tape it to a vacuum hose to get it out.
Suck it out.
| |
| | |
08-22-2012, 10:11 AM
|
#6 | | I want to be a person and not an icon.
Join Date: Jan 2010 Location: Mugello
Posts: 4,179
Thanked 5,286 Times in 892 Posts
Failed 829 Times in 182 Posts
|
I have 194 LED bulbs, if I remember correctly.
| |
| | |
08-22-2012, 10:38 AM
|
#7 | | Where's my RS Christmas Lobster?!
Join Date: Feb 2012 Location: Richmond
Posts: 1,116
Thanked 903 Times in 285 Posts
Failed 182 Times in 32 Posts
| Quote:
Originally Posted by 09k20 Use a long bendy straw and tape it to a vacuum hose to get it out.
Suck it out. | Thats a killer idea, gonna try that!
this is why i come to revscene | |
| | |
08-22-2012, 05:09 PM
|
#8 | | I want to be a person and not an icon.
Join Date: Jan 2010 Location: Mugello
Posts: 4,179
Thanked 5,286 Times in 892 Posts
Failed 829 Times in 182 Posts
|
lol wtf :S if you still need bulb tell me
| |
| | |
08-22-2012, 06:13 PM
|
#9 | | Where's my RS Christmas Lobster?!
Join Date: Feb 2012 Location: Richmond
Posts: 1,116
Thanked 903 Times in 285 Posts
Failed 182 Times in 32 Posts
| Quote:
Originally Posted by 09k20 Use a long bendy straw and tape it to a vacuum hose to get it out.
Suck it out. | Rofl, saved me like 2 hours work.    | |
| | |
08-22-2012, 07:02 PM
|
#10 | | Rider
Join Date: Jul 2002 Location: Vancouver
Posts: 502
Thanked 32 Times in 8 Posts
Failed 1 Time in 1 Post
|
Haha, that's awesome. Nice tip.
__________________
My Buyer/Seller Feedback Page: http://www.revscene.net/forums/showthread.php?s=&threadid=116199
| |
| | |
08-22-2012, 09:00 PM
|
#11 | | Why'd you do that for?
Join Date: Sep 2007 Location: Vancouver
Posts: 1,399
Thanked 302 Times in 137 Posts
Failed 30 Times in 19 Posts
| Quote:
Originally Posted by 09k20 Use a long bendy straw and tape it to a vacuum hose to get it out.
Suck it out. | fucking hell...i should of posted on here so you could of given me that great idea.
I spent a good hour n half...
| |
| | |
08-23-2012, 11:49 AM
|
#12 | | Where's my RS Christmas Lobster?!
Join Date: Feb 2012 Location: Richmond
Posts: 1,116
Thanked 903 Times in 285 Posts
Failed 182 Times in 32 Posts
|
Woo! DDM emailed me about my ticket I sent in, they claim that this is the first time they have heard about this issue and that it should not have happened unless there was some outside physical force. They sent me 2 free ones (same ones i think, and my original order only had 1 LED) no questions asked, very super easy! DDM has got a +1 from me! Good customer service
| |
| | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is On
| | |
All times are GMT -8. The time now is 12:31 AM.
|
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
The banners on the left side and below do not show for registered users!
