[Lomac]

As title stated, I'm hoping to borrow a set of jack stands and a jack that's compatible with lifted vehicles. I need to do some work on a lifted Blazer and all of my stuff is designed for vehicles with a lower center of gravity. :p Anyone willing to help a brother out? I can pay with a case of beer or future mechanical help to anyone interested.

[Brianrietta]

My stuff is up in Kelowna (and would otherwise be in Chilliwack, but probably too far anyways...) or I'd say come pick it up.

[BrRsn]

Hey lomac what lifting range do you need?

I got some 3ton jacks from princess auto, good for lifting from the axle but they nearly max out when I try to get my wheels off the ground by jacking off the frame (stock WJ)

don't need em for the next 3 weeks or so, located in southvan

[Lomac]

To be honest, I'm not entirely sure of the lift range.

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/903453_10152698544685080_2103820045_o.jpg

It's been raised slightly and is running on larger tires, but I'm not sure of the current height.

[BrRsn]

nice bike :p


if you're trying to lift by the frame they'll likely be too small depending on your suspension travel, but if you need to lift by the axles they should be fine.

I just checked princess auto, mine max out at ~23 inches -- works for my stock jeep on 30" tall tires