PDA

View Full Version

: [Q] Fluid flushing


FerrariEnzo
09-24-2013, 09:10 AM
What do people here recommend to use for flushing engine, tranny and brake? and what fluids to stay away

fliptuner
09-24-2013, 09:14 AM
Flush with engine oil, transmission fluid, and brake fluid.

Snake oils = :denied:

FerrariEnzo
09-24-2013, 12:29 PM
so there is not special fluid to flush with.. just use the respective fluids.. how much to use?

yray
09-24-2013, 12:45 PM
Inb4 lifetime fluids

bensta
09-24-2013, 01:34 PM
brakes u cant really flush, you just bleed until the fluid is clean.

engine oil just do a change after 1000km and should be fine.

tranny fluid, same ideas oil

dared3vil0
09-24-2013, 02:24 PM
I'd suggest using water to flush your engine. Here's a guide:


http://mustangforums.com/forum/5-0l-general-discussion/368307-im-done-with-this-car.html
















DISCLAIMER: Don't flush your engine with water.

!SG
09-24-2013, 04:13 PM
the only other thing i can think of is injector flushing. the quick solutions in a bottle only help so much, if your car is old, or you just a cheap ass and fill with low grade gas, you may need to have the injectors cleaned properly with a solution and pressurized system.

BetaPhoenix
09-24-2013, 11:18 PM
the only other thing i can think of is injector flushing. the quick solutions in a bottle only help so much, if your car is old, or you just a cheap ass and fill with low grade gas, you may need to have the injectors cleaned properly with a solution and pressurized system.

What do you consider a "low grade of fuel"? I'm going to assume you're talking about octane ratings since you mentioned price.
Octane ratings will not affect injectors. It has nothing to do with the quality of the fuel.
On the average car, cleaning them will barely make a difference. Diesel is another story.

inv4zn
09-24-2013, 11:25 PM
Also depends on a car...

"flushing" is used loosely - you can do drain/fill/repeat until all the old stuff is out...or you can pressurize it and actually flush it out, and refill with new fluids.

For example, flushing an auto tranny (with pressure) can destroy it.

!SG
09-25-2013, 07:40 AM
What do you consider a "low grade of fuel"? I'm going to assume you're talking about octane ratings since you mentioned price.
Octane ratings will not affect injectors. It has nothing to do with the quality of the fuel.
On the average car, cleaning them will barely make a difference. Diesel is another story.

nope, i mean low grade, e85, crappy ass gas from buttfuck gas station out in the middle of nowhere, stale gas.

Hondaracer
09-26-2013, 12:18 PM
On older cars sea foam has always worked great in my experience (3 cars)
Posted via RS Mobile

?NR
09-26-2013, 01:18 PM
for cleaning injectors, ultra sonic cleaning. For engines, dump in some Dec 3 along with some oil and drain till you are satisfied that it's clean.
Posted via RS Mobile

ScratchedMy991
09-27-2013, 10:33 AM
What do people here recommend to use for flushing engine, tranny and brake? and what fluids to stay away
The answer is simple - OEM recommended engine oil, transmission oil and brake fluid. There is no reason to use any other fluids unless your car is used primarily for anything other than regular street use.

Don't buy into the hype.