[Recon604]

http://i62.tinypic.com/mwe4ue.jpg

Just got the rear stands on! Pretty scary trying to put the bike on them

[Klobbersaurus]

interested in a scott steering damper?

[Recon604]

^sure brand new or used?

[AuStar]

Just got the rear stands on! Pretty scary trying to put the bike on them

I feel you, I always get someone to give me a hand if possible cause I don't want to run the risk of dropping my bike.

[Glaedr]

http://i62.tinypic.com/mwe4ue.jpg

http://i60.tinypic.com/jb7mds.jpg
Just got the rear stands on! Pretty scary trying to put the bike on them

It's actually not too bad, i followed this video and its been pretty smooth sailing since!

Start at the 2:30 mark

http://youtu.be/RpxJ6tUKJc0?t=2m30s

[Recon604]

thats what i actually did, stand on the exhaust side and gently lean it towards you.

[Glaedr]

thats what i actually did, stand on the exhaust side and gently lean it towards you.

Ya its quite scary at first, but once you get the hang of it its easy peasy! Can be a nuisance at times cause the akro pipe blocks your line of sight...

[Recon604]

http://i61.tinypic.com/11jwu15.jpg

got hids installed and bike is now insured!

[Sunfighter]

oh! Details on the HID install...

[Recon604]

oh! Details on the HID install...

just drilled a hole in the dust cover xD

[Glaedr]

just drilled a hole in the dust cover xD

where did you install the ballast?

[Recon604]

where did you install the ballast?

on side of the fairings, played around with the ballast n wiring and got them to fit snug between the frame. didnt need velcro or any zipties.

[fT-z33wor]

Got any plans for this bad boy this season? :bigthumb:

[Recon604]

Got any plans for this bad boy this season? :bigthumb:

prob not this season, still got to get used to the bike. Prob next season ill put on some pazzo levers and steering dampener.

[320icar]

I remember on my ruckus i had an r6 rear light with integrated amber turn signals. Crazy bright and really nice. Would you consider a mod like that to clean up the rear of the bike?
Posted via RS Mobile

*edit* i forgot that when u tapped the brakes the light would strobe twice and stay solid on 3rd. Sooo great for grabbing attention.

http://youtu.be/KOfxga8w7hA

[Recon604]

I remember on my ruckus i had an r6 rear light with integrated amber turn signals. Crazy bright and really nice. Would you consider a mod like that to clean up the rear of the bike?
Posted via RS Mobile

*edit* i forgot that when u tapped the brakes the light would strobe twice and stay solid on 3rd. Sooo great for grabbing attention.

JDMYO Honda Ruckus R6 Sequential Smoked LED Tail Light - YouTube (http://youtu.be/KOfxga8w7hA)

where did you get the integrated turn signals? motodynamics?

I am not really planning to get those until I feel really comfortable with riding haha.

[320icar]

im not sure where it was purchased from. it was included when i bought my ruckus. i compared it to stock ruck brakes and running lights and it was far brighter than i ever expected. the ruckus is small so the integrated turn signals worked very well, and was very noticeable during the day. on a larger bike though im not 100%. but i would feel comfortable enough with those lights to mount it to almost any bike i'd get in the future (if i were to want to do a rear fender eliminator or plate relocation)

not sure why, but the stock flasher unit still worked with these led lights. but once i swapped my front turn signals to LED it blinked double time. so i got a different flasher relay (can't remember which one) which does not rely on load

[fT-z33wor]

look into tst industries

TST Industries, manufacturer of quality motorcycle products (http://tstindustries.com/)

[Recon604]

look into tst industries

TST Industries, manufacturer of quality motorcycle products (http://tstindustries.com/)

yeap theres many of these integrated taillights. Theres CustomLED too, all the same imo.

I am waiting for the Watsen flush mounts :concentrate: have to wait till June as they are packed up with orders from Feb and March

[fT-z33wor]

yeap theres many of these integrated taillights. Theres CustomLED too, all the same imo.

I am waiting for the Watsen flush mounts :concentrate: have to wait till June as they are packed up with orders from Feb and March

Those'll take anywhere from 3-9 months. Mr. Watsen builds these things in his basement and its all hand crafted. So worth the wait, but we've had guys order these things in the beginning of the year and them not show up till October. It's funny, one time the guy wound up selling his bike before he got his signals :lol

ps- Should look into some braided lines and a pair of more aggressive pads with better initial bite. Those are the first things I do to any bike I own. It makes the bike a lot more confidence inspiring under hard braking.

[Recon604]

Those'll take anywhere from 3-9 months. Mr. Watsen builds these things in his basement and its all hand crafted. So worth the wait, but we've had guys order these things in the beginning of the year and them not show up till October. It's funny, one time the guy wound up selling his bike before he got his signals :lol

ps- Should look into some braided lines and a pair of more aggressive pads with better initial bite. Those are the first things I do to any bike I own. It makes the bike a lot more confidence inspiring under hard braking.

yeap planning on the galfer lines after I get used to the bike xD, what kind of pads would you suggest? Galfer pads as well?

[fT-z33wor]

yeap planning on the galfer lines after I get used to the bike xD, what kind of pads would you suggest? Galfer pads as well?

I'd probably go with the Spieglers man, Galfer's been having some quality control issues lately and I've seen the fittings that were supposed to be stainless steel build surface rust a a gsxr just last month. They could have since fixed the issues I'm not sure.

I've never tried Galfer pads, but I know EBC makes a solid product and so does Carbon Lorraine. I think the wait time for Spiegler right now is about a minimum 2 weeks behind production schedule, so if you're in a rush you could always jump the gun on the Galfers as they are all pre-made. Due to the wide variety of color combinations Spiegler offers it's all made to order.

[320icar]

With those flush mount LED's do you guys get hassled by police? I'm not sure how noticeable or bright they are. Granted they do look baller as fack
Posted via RS Mobile

[fT-z33wor]

Industry standard LEDs are pretty vibrant, even the budget $40 bikemaster ones are very noticeable in broad daylight. Now the question of whether its illegal or not, well, you can be ticketed for essentially anything on your bike that is not oem. At the end of the day, it comes down on how you carry yourself and whether you act accordingly or not. The police have better things to do with their time, but if you're riding up and down Robson at 12,000rpm you can surely expect to be given a hard time.

Heck I've had a officer come in before while on duty and order a fender eliminator and integrated tail light on separate occasions. :whistle:

[Recon604]

When the sun came out this afternoon, I decided to clean and lube my chain. It was pretty damn dirty, remember to wear gloves!

After that, I washed, clay-barred and then polished my r6 with zaino. It's so shiny now!

[Recon604]

http://i58.tinypic.com/2yo1mhz.jpg

[hopalong]

Whoa did you finally bring her home??

[bananana]

Holy crap your garage is clean

[Recon604]

so dropped my bike yesterday while parking underneath a tree when the leaves on the ground were still moist =S

Frame slider saved it, got minor scratches on the exhaust piping tho.

[hopalong]

Popped your cherry. It's not IF it's gonna happen, it's when. I'm sure everyone here has done it atleast once.

[Recon604]

Got the PCIII and flashed the custom map and enabled fuel accelerator

http://i59.tinypic.com/24djy1l.jpg

[Recon604]

Done for the season and got my watsen flush mounts

http://i60.tinypic.com/2e3wpcp.jpg