[w_tech]

Hi,
Anyone knows who might carry hardened steel nuts and bolts?

I am specifically looking for a few M12x1.50 displaced thread locknuts, class 10.9.

I called local:
lordco
princess auto
KMS
Napa
BC Fastners
bumper to bumper
and no luck.

Chrysler dealer in Burnaby has some for $10 - which is a bit of a rip off (and far from me especially that the car is lacking a suspension)

[hud 91gt]

Metric thread are hard to find in Vancouver. Surprisingly Canadian Tire can have a decent selection. Lordco on 2nd ave also has a good selection of metric. They can basically get anything you just have to get them to open their catalog and search for it. That's the challenging part.


If you want to drive somewhere right now and get them, the best in stock selection is Alder Auto Parts. Call any location they should be able to help you.

[hud 91gt]

I just realized you want lock nuts. Honestly, an M12 locknut is probably going to be $1 a pop if you can even find them. Burnaby may be your best bet. I'd try calling Alder Auto.

[RRxtar]

^ For some reason metric is hard to get, but you can get a good assortment of sae literally anywhere.

Canadian tire has a half decent selection for smaller stuff if you just need a few. I cant remember if they have 10.9 or just 8.8 (which is the metric equivilent to gr5). I don't think they will have your lock nuts, but for other metric stuff its worth looking tho. In the fasteners section in the pull out drawers, and sometimes they have some random stuff on the spinny shelves in the auto fasteners section.


Kelowna has a 'Lakeside Fasteners' that has almost everything and you can buy individual pieces. Not sure what you guys would have down there. Do you have a Fastenal? They would have it too, but if its not in bulk, youd be stuck buying a box.

[fliptuner]

Call Ammo

[HKS PWR]

I'm pretty sure Pacific Fasteners on 1st Ave will have it. Have you tried looking online on Acklands Grainger's website?

[CCA-Dave]

Hi,
Anyone knows who might carry hardened steel nuts and bolts?

I am specifically looking for a few M12x1.50 displaced thread locknuts, class 10.9.

I called local:
lordco
princess auto
KMS
Napa
BC Fastners
bumper to bumper
and no luck.

Chrysler dealer in Burnaby has some for $10 - which is a bit of a rip off (and far from me especially that the car is lacking a suspension)

I used to get all my metric hardware at Fabory Metrican...but I think they are an Acklands-Grainger now? Here's the nuts you want:

https://www.fabory.com/en-CA/fasteners/nuts-rivet-nuts-inserts/prevailing-torque-nuts-all-metal-din-6925-metric-fine-din-6925-steel-right-zinc-plated-10-m12x1-50/p/12505120150

And this is where google says Fabory is now (https://www.google.ca/maps/place/Fabory+Vancouver/@49.2447428,-122.7668119,17z/data=!3m1!4b1!4m5!3m4!1s0x5485d60951d9bc0b:0x259d4 c18039a9fa4!8m2!3d49.2447428!4d-122.7646232), but it's been changed to a standard Acklands Grainger. I'd call, and have the Fabory item number handy.

[Scotsman]

Fastenal always has what I need

I've only gone to the one in Delta but I just googled and see they have branches in Vancouver, Burnaby, Delta, Richmond North Vancouver, Surrey, Langley, PoCo, and Abby

[Scotsman]

I used to get all my metric hardware at Fabory Metrican...but I think they are an Acklands-Grainger now? Here's the nuts you want:

https://www.fabory.com/en-CA/fasteners/nuts-rivet-nuts-inserts/prevailing-torque-nuts-all-metal-din-6925-metric-fine-din-6925-steel-right-zinc-plated-10-m12x1-50/p/12505120150

And this is where google says Fabory is now (https://www.google.ca/maps/place/Fabory+Vancouver/@49.2447428,-122.7668119,17z/data=!3m1!4b1!4m5!3m4!1s0x5485d60951d9bc0b:0x259d4 c18039a9fa4!8m2!3d49.2447428!4d-122.7646232), but it's been changed to a standard Acklands Grainger. I'd call, and have the Fabory item number handy.

Yes Acklands bought Fabory so I think some of the Ackland stores now serve as double shops

[cunninglinguist]

Hi,
Anyone knows who might carry hardened steel nuts and bolts?

I am specifically looking for a few M12x1.50 displaced thread locknuts, class 10.9.

I called local:
lordco
princess auto
KMS
Napa
BC Fastners
bumper to bumper
and no luck.

Chrysler dealer in Burnaby has some for $10 - which is a bit of a rip off (and far from me especially that the car is lacking a suspension)

What's it for and how many do you need?

[cunninglinguist]

I've bought 10.9 bolts from Canadian Tire before. Pretty sure they have the nuts too. They come in a clamshell package near the Dorman "HELP" area on a rotating display at the Grandview location.

[immorality]

I've had decent luck with the Lowes on Queensborough.

[lowside67]

I'm pretty sure Pacific Fasteners on 1st Ave will have it. Have you tried looking online on Acklands Grainger's website?
Worth calling these guys - I sourced a lot of higher grade metric bolts from them when I built my racecar (mind you this has been a few years now).

-Mark

[cunninglinguist]

Sorry bro, SOL at Canadian tire. I was there today and they only had 12x 1.75 nuts. Weird

[w_tech]

Thank you all for the tips.
Fastenal on Fraser St. were happy to order for me in small quantities.
Fabory minimum order $100.
Pacific did not have them.