RCubed
08-08-2018, 08:13 AM
2010 Subaru STI (Spun Bearing)
Milage: 104632 KM
BC Car, Alberta OoP Performed.
Car currently in Coquitlam.
This vehicle's current status is: NORMAL (NOT A REBUILD)
1 Claim front end collision- Rear ender (Bumper, fusebox, hood replaced)
Spun Bearing. Motor pulled at HBL Autosports.
I currently live and work in Alberta and i've gotten to a point where I dont drive this enough to justify putting a new motor into it.
Its a good base project for anyone who wants to swap in a motor.
The block itself needs to be replaced. The heads appear salvageable. I was recommended a IAG block.
https://farm2.staticflickr.com/1652/25888111374_edeab50e36_b.jpg (https://flic.kr/p/FrDkzQ)Richard's STI Apr 2016 (https://flic.kr/p/FrDkzQ) by Richard Tran (https://www.flickr.com/photos/rcubedphotography/), on Flickr
https://farm1.staticflickr.com/634/22072335929_15f9e10712_b.jpg (https://flic.kr/p/zCsuu2)Richard's STI Vancouver Visit (https://flic.kr/p/zCsuu2) by Richard Tran (https://www.flickr.com/photos/rcubedphotography/), on Flickr
https://farm6.staticflickr.com/5680/22246383382_55abc306ea_b.jpg (https://flic.kr/p/zTQwJb)Richard's STI Vancouver Visit (https://flic.kr/p/zTQwJb) by Richard Tran (https://www.flickr.com/photos/rcubedphotography/), on Flickr
IMGUR ALBUM FOR RECENT PHOTOS (https://imgur.com/a/jYnXO5e)
Exterior:
-2011 OEM STI Front Bumper
-Seibon CW Hood (Painted SWP)
-Black Top Aero front lip
-Black Top Aero Side Skirts
-Black top Aero Rear Spats
-Black Top Aero Rear Spoiler
-AVOTurboworld Underspoiler
-LED F1 Style foglight
-HT Autos Fender Flares (+50mm )
-JDM Roof Vent
-Quad Supertones
Interior/Sound:
-Polk Audio for all 4 doors and + tweeters.
-Mild sound deadning
-Audio Integrations discrete sub box
-10" Type S
-MRP-M500 AMP for Sub
-MRP-F300 AMP for Doors
-Kenwood DNX5140
-JDM Impreza dash bezel.
-GT Spec D Shaped Steering wheel
-Stock driver seat will be thrown back in
-Buddy Club Superlow Seat rail will be included.
-Compustar RF-1WG6-AM
-Drone Mobile installed (will transfer account)
Performance:
-Magnaflow CBE
-CNT Downpipe
-COBB Accessport AP3-SUB-003 (Married to ECU)
Footwork:
-BC BR Coilovers 10K F/R
-RCE 25mm Front and rear hollow sway bars
-Whiteline rear camber bolts
-Ambit Wheels RT8 18x10.5 +15 Hyper Black (Curbage on front Drivers)
-Hankook Ventus EVO 2 285/35/18
-Project Kics Neochrome lugs
Since it isnt currently running, it will need to be towed. Its also obviously sold AS-IS. I will NOT be parting. Take it all, everything is still there if you want to take it apart as a parts car (Brembos, 6MT, interior,etc)
The car is in Coquitlam and can arrange viewings during business hours)
sord
Milage: 104632 KM
BC Car, Alberta OoP Performed.
Car currently in Coquitlam.
This vehicle's current status is: NORMAL (NOT A REBUILD)
1 Claim front end collision- Rear ender (Bumper, fusebox, hood replaced)
Spun Bearing. Motor pulled at HBL Autosports.
I currently live and work in Alberta and i've gotten to a point where I dont drive this enough to justify putting a new motor into it.
Its a good base project for anyone who wants to swap in a motor.
The block itself needs to be replaced. The heads appear salvageable. I was recommended a IAG block.
https://farm2.staticflickr.com/1652/25888111374_edeab50e36_b.jpg (https://flic.kr/p/FrDkzQ)Richard's STI Apr 2016 (https://flic.kr/p/FrDkzQ) by Richard Tran (https://www.flickr.com/photos/rcubedphotography/), on Flickr
https://farm1.staticflickr.com/634/22072335929_15f9e10712_b.jpg (https://flic.kr/p/zCsuu2)Richard's STI Vancouver Visit (https://flic.kr/p/zCsuu2) by Richard Tran (https://www.flickr.com/photos/rcubedphotography/), on Flickr
https://farm6.staticflickr.com/5680/22246383382_55abc306ea_b.jpg (https://flic.kr/p/zTQwJb)Richard's STI Vancouver Visit (https://flic.kr/p/zTQwJb) by Richard Tran (https://www.flickr.com/photos/rcubedphotography/), on Flickr
IMGUR ALBUM FOR RECENT PHOTOS (https://imgur.com/a/jYnXO5e)
Exterior:
-2011 OEM STI Front Bumper
-Seibon CW Hood (Painted SWP)
-Black Top Aero front lip
-Black Top Aero Side Skirts
-Black top Aero Rear Spats
-Black Top Aero Rear Spoiler
-AVOTurboworld Underspoiler
-LED F1 Style foglight
-HT Autos Fender Flares (+50mm )
-JDM Roof Vent
-Quad Supertones
Interior/Sound:
-Polk Audio for all 4 doors and + tweeters.
-Mild sound deadning
-Audio Integrations discrete sub box
-10" Type S
-MRP-M500 AMP for Sub
-MRP-F300 AMP for Doors
-Kenwood DNX5140
-JDM Impreza dash bezel.
-GT Spec D Shaped Steering wheel
-Stock driver seat will be thrown back in
-Buddy Club Superlow Seat rail will be included.
-Compustar RF-1WG6-AM
-Drone Mobile installed (will transfer account)
Performance:
-Magnaflow CBE
-CNT Downpipe
-COBB Accessport AP3-SUB-003 (Married to ECU)
Footwork:
-BC BR Coilovers 10K F/R
-RCE 25mm Front and rear hollow sway bars
-Whiteline rear camber bolts
-Ambit Wheels RT8 18x10.5 +15 Hyper Black (Curbage on front Drivers)
-Hankook Ventus EVO 2 285/35/18
-Project Kics Neochrome lugs
Since it isnt currently running, it will need to be towed. Its also obviously sold AS-IS. I will NOT be parting. Take it all, everything is still there if you want to take it apart as a parts car (Brembos, 6MT, interior,etc)
The car is in Coquitlam and can arrange viewings during business hours)
sord